Abstract:In order to predict flow behavior and find the optimum hot working processing parameters for 5754 aluminum alloy, the experimental flow stress data obtained from the isothermal hot compression tests on a Gleeble-3500 thermo-simulation apparatus, with different strain rates (0.1⁻10 s⁻1) and temperatures (300⁻500 &deg;C), were used to construct the constitutive models of the strain-compensation Arrhenius (SA) and back propagation (BP) artificial neural network (ANN). In addition, an optimized BP⁻ANN model based on the genetic algorithm (GA) was established. Furthermore, the predictability of the three models was evaluated by the statistical indicators, including the correlation coefficient (R) and average absolute relative error (AARE). The results showed that the R of the SA model, BP⁻ANN model, and ANN⁻GA model were 0.9918, 0.9929, and 0.9999, respectively, while the AARE of these models was found to be 3.2499⁻5.6774%, 0.0567⁻5.4436% and 0.0232⁻1.0485%, respectively. The prediction error of the SA model was high at 400 &deg;C. It was more accurate to use the BP⁻ANN model to determine the flow behavior compared to the SA model. However, the BP⁻ANN model had more instability at 300 &deg;C and a true strain in the range of 0.4⁻0.6. When compared with the SA model and BP⁻ANN model, the ANN⁻GA model had a more efficient and more accurate prediction ability during the whole deformation process. Furthermore, the dynamic softening characteristic was analyzed by the flow curves. All curves showed that 5754 aluminum alloy showed the typical rheological characteristics. The flow stress rose rapidly with increasing strain until it reached a peak. After this, the flow stress remained constant, which demonstrates a steady flow softening phenomenon. Besides, the flow stress and the required variables to reach the steady state deformation increased with increasing strain rate and decreasing temperature.

Establishment of hot deformation flow stress prediction model based on GA improved BP neural network

Prediction on Hot Deformation Flow Stress of Medium-carbon Micro-alloyed Steels with Vanadium Based on Artificial Neural Network

Dynamic Behavior and Modified Artificial Neural Network Model for Predicting Flow Stress During Hot Deformation of Alloy 925

Prediction of Flow Stress of Annealed 7075 Al Alloy in Hot Deformation Using Strain-Compensated Arrhenius and Neural Network Models

Prediction of the flow stress of high-speed steel during hot deformation using a BP artificial neural network

Prediction of flow stress in a wide temperature range involving phase transformation for as-cast Ti-6Al-2Zr-1Mo-1V alloy by artificial neural network

A Characterization for the Constitutive Relationships of 42crmo High Strength Steel by Artificial Neural Network and Its Application in Isothermal Deformation

A Modified Back Propagation Artificial Neural Network Model Based on Genetic Algorithm to Predict the Flow Behavior of 5754 Aluminum Alloy

Prediction of hot deformation behavior in Ni-based alloy considering the effect of initial microstructure

Flow Stress Numerical Prediction of Steel AerMet100 during Hot Compression Deformation Process Based on BP Artificial Neural Network Principle

Application of neural networks to predict the elevated temperature flow behavior of a low alloy steel

Flow Stress Prediction of High-Nb TiAl Alloys under High Temperature Deformation

An Artificial Neural Network Model for Flow Stress of 2519 Aluminum Alloy at Elevated Temperature

Artificial Neural Network Modelling to Predict Hot Deformation Behaviour of As Hiped Fgh4169 Superalloy

Modeling the Hot Deformation Behaviors of As-Extruded 7075 Aluminum Alloy by an Artificial Neural Network with Back-Propagation Algorithm

Modeling Constitutive Relationship of Ti-555211 Alloy by Artificial Neural Network During High-Temperature Deformation

High-Precision Constitutive Model Of Ti6242s Alloy Hot Deformation Based On Artificial Neural Network

Modeling of Flow Stress of As-Rolled 7075 Aluminum Alloy during Hot Deformation by Artificial Neural Network and Application

Prediction of True Stress at Hot Deformation of High Manganese Steel by Artificial Neural Network Modeling

Modeling of the Hot Flow Behaviors for Ti-6Al-4V-0.1Ru Alloy by GA-BPNN Model and Its Application

Research on constitutive model of aluminum alloy 7075 thermal deformation based on deep neural network