Abstract:Solid recovered fuels constitute a valuable alternative for the management of those non-hazardous waste fractions that cannot be recycled. The main purpose of this research is to assess the suitability of three different wastes from the landfill of the local waste management company (COGERSA), to be used as solid recovered fuels in a cement kiln near their facilities. The wastes analyzed were: End of life vehicles waste, packaging and bulky wastes. The study was carried out in two different periods of the year: November 2013 and April 2014. In order to characterize and classify these wastes as solid recovered fuels, they were separated into homogeneous fractions in order to determine different element components, such as plastics, cellulosic materials, packagings or textile compounds, and the elemental analysis (including chlorine content), heavy metal content and the heating value of each fraction were determined. The lower heating value of the waste fractions on wet basis varies between 10 MJ kg(-1) and 42 MJ kg(-1). One of the packaging wastes presents a very high chlorine content (6.3 wt.%) due to the presence of polyvinylchloride from pipe fragments, being the other wastes below the established limits. Most of the wastes analyzed meet the heavy metals restrictions, except the fine fraction of the end of life vehicles waste. In addition, none of the wastes exceed the mercury limit content, which is one of the parameters considered for the solid recovered fuels classification. A comparison among the experimental higher heating values and empirical models that predict the heating value from the elemental analysis data was carried out. Finally, from the three wastes measured, the fine fraction of the end of life vehicles waste was discarded for its use as solid recovered fuels due to the lower heating value and its high heavy metals content. From the point of view of the heating value, the end of life vehicles waste was the most suitable residue with a lower heating value of 35.89 MJ kg(-1), followed by the packaging waste and the bulky waste, respectively. When mixing the wastes studied a global waste was obtained, whose classification as solid recovered fuels was NCV 1 Cl 3 Hg 3. From the empirical models used for calculating higher heating value from elemental content, Scheurer-Kestner was the model that best fit the experimental data corresponding to the wastes collected in November 2013, whereas Chang equation was the most approximate to the experimental heating values for April 2014 fractions. This difference is due to higher chlorine content of the second batch of wastes, since Chang equation is the only one that incorporates the chlorine content.

Non-recyclable municipal solid waste characterization and pyrolysis for energy recovery

Pyrolysis of Specific Non-Recyclable Waste Materials: Energy Recovery and Detailed Product Characteristics

Pyrolysis, a recovery solution to reduce landfilling of residual organic waste generated from mixed municipal waste

Kinetic Modeling of Co-Pyrogasification in Municipal Solid Waste (MSW) Management: Towards Sustainable Resource Recovery and Energy Generation

Assessment of pyrolysis potential of Indian municipal solid waste and legacy waste via physicochemical and thermochemical characterization

An Overview of Pyrolysis as Waste Treatment to Produce Eco-Energy

Pyrolysis of municipal solid waste compost: Pilot plant evaluation as a sustainable practise of waste management

Evaluation of the potential of different high calorific waste fractions for the preparation of solid recovered fuels

Solid Waste as a Renewable Source of Energy: A Comparative Study on Thermal and Kinetic Behavior of Three Organic Solid Wastes

Municipal Plastic Waste Recycling through Pyrogasification

Product characteristics and heat of reaction of municipal solid waste in pyrolysis and gasification at low temperatures

TGA Pyrolysis and Gasification of Combustible Municipal Solid Waste

Pyrolysis characteristics of organic components of municipal solid waste at high heating rates.

Municipal solid waste (MSW) - competitive raw materials for combustible materials obtaining

Test study on batched high temperature pyrolysis of some msw

Classification and comparison of municipal solid waste based on thermochemical characteristics

Pyrolysis of plastic waste: Opportunities and challenges

Sustainable Recycling of Residues from the Food Waste (FW) Composting Plant Via Pyrolysis: Thermal Characterization and Kinetic Studies

Assessment of energy consumption and environmental safety measures in a plasma pyrolysis plant for eco-friendly waste treatment

PYROLYTIC KINETICS OF COMBUSTIBLE OF MSW

Pyrolitic Methods of the Thermal Processing of Solid Municipal Waste