Abstract:Also, the sentences “The first discharge and charge steps (Figure S6) deliver a specific discharge capacity of 1380 mAh g−1 for G/Sn/G, 1013 mAh g−1 for G-Sn@C, and 1572 mAh g−1 for G-Sn electrodes, with initial Coulombic efficiencies of 66.5%, 65.6%, and 64.8%, respectively.” on page 3541 should be “The first discharge and charge steps (Figure S6) deliver a specific discharge capacity of 1380 mAh g−1 for G/Sn/G, 1013 mAh g−1 for G-Sn@C, and 1637 mAh g−1 for G-Sn electrodes, with initial Coulombic efficiencies of 66.5%, 65.6%, and 61%, respectively.” The corresponding first discharge and charge curves (Figure S6) and the thermal gravimetric analysis data (Figure S2) for the control sample (G-Sn) are shown in the Supporting Information for this correction which is available from the Wiley Online Library or from the author. The arguments and conclusions of the original article are not affected. The authors apologize for any inconvenience caused.

Correction: MoS2 Nanoflowers Encapsulated into Carbon Nanofibers Containing Amorphous SnO2 As an Anode for Lithium-Ion Batteries.

Correction: Co–Mo–P carbon nanospheres derived from metal–organic frameworks as a high-performance electrocatalyst towards efficient water splitting

Corrigendum: Nitrogen-Doped Carbon Embedded MoS2 Microspheres as Advanced Anodes for Lithium- and Sodium-Ion Batteries.

Correction: Direct impregnation of SeS2 into a MOF-derived 3D nanoporous Co–N–C architecture towards superior rechargeable lithium batteries

Correction: Few-layer TiO2–B Nanosheets with N-doped Graphene Nanosheets As a Highly Robust Anode for Lithium-Ion Batteries

Correction: Mesoporous polyvalent Ni–Mn–Co–O composite nanowire arrays towards integrated anodes boosting high-properties lithium storage

Correction: Toward robust lithium-sulfur batteries via advancing Li2S deposition.

Correction: Porous RuO 2 -Co 3 O 4 /C nanocubes as high-performance trifunctional electrocatalysts for zinc–air batteries and overall water splitting

Correction: Ruthenium oxide coated ordered mesoporous carbon nanofiber arrays: a highly bifunctional oxygen electrocatalyst for rechargeable Zn–air batteries

Correction: Boosting the transport kinetics of free-standing SnS 2 @carbon nanofibers by electronic structure modulation for advanced lithium storage

Correction to Retracted Article: Mesoporous amorphous FeOF nanococoons for high-rate and long-life rechargeable sodium-ion batteries

Investigating The Electroactivity Of Nitrogen Species In Moc Nanoparticles/N-Doped Carbon Nanosheets For High-Performance Na/Li-Ion Batteries (Vol 8, Pg 21298, 2020)

Corrigendum: Highly Ordered Mesoporous NiCo2O4 As a High Performance Anode Material for Li-Ion Batteries

Correction: Ion-selective aramid nanofiber-based Janus separators fabricated by a dry-wet phase inversion approach for lithium–sulfur batteries

Correction: Sulfur–hydrazine Hydrate-Based Chemical Synthesis of Sulfur@graphene Composite for Lithium–sulfur Batteries

Correction: Confined Co9S8 into a Defective Carbon Matrix As a Bifunctional Oxygen Electrocatalyst for Rechargeable Zinc–air Batteries

Direct impregnation of SeS2 into a MOF-derived 3D nanoporous Co-N-C architecture towards superior rechargeable lithium batteries (vol 6, pg 10466, 2018)

Correction: A Lithium Air Battery with a Lithiated Al-carbon Anode.

Correction: Graphene‐Confined Sn Nanosheets with Enhanced Lithium Storage Capability

Correction: Large-scale synthesis of ultrafine Fe 3 C nanoparticles embedded in mesoporous carbon nanosheets for high-rate lithium storage

Correction: <i>In situ</i> encapsulation of core–shell-structured Co@Co<sub>3</sub>O<sub>4</sub> into nitrogen-doped carbon polyhedra as a bifunctional catalyst for rechargeable Zn–air batteries