Abstract:Scale-Adaptive Simulations (SAS) were carried out to investigate streamwise evolution of turbulent flow and heat transfer over channel surfaces with V ribs and V-rib-dimple compound turbulators. The compound turbulators periodically consist of 45 V-shaped ribs and spherical dimples of varied sizes placed on the channel wall between the V-ribs. Three sets of dimple sizes are investigated with the same depth-printed diameter ratio of hd/d = 0.2. The aspect ratio of the rectangular channel is W/H = 4, and the rib pitch-to-height ratio is P/e = 10. The greatest global heat transfer enhancement and overall thermal performance is achieved by the V-rib-dimple case with the printed dimple diameter-rib pitch ratio of d/P = 0.167. Obvious streamwise development characteristics of the turbulent flow structure and heat transfer enhancement are observed in the V-rib and V-rib-dimple channels, and the key findings are as follows. (1) For the V-rib-dimple cases, the global heat transfer enhancement by the presence of dimples significantly depends on the channel length. In terms of heat transfer, the V-rib dimple cases outperform the V-rib case when L/Dh > 5.1 and gain more improvement at larger L/Dh. (2) There is an obvious streamwise evolution of the heat transfer in the V-rib and V-rib-dimple channels. The regional Nusselt number ratios first increase to reach the peak value, then decrease, and finally settle at the fully developed value. Introducing dimples can expand the range of increasing regional heat transfer by over 45%, yielding up to 23.2% higher regional heat transfer for the V-rib-dimple cases in the fully developed region. (3) The near-wall advective transport dominants the local heat transfer for the V-rib case, but it is gradually attenuated as the boundary layer grows thicker, causing the local heat transfer to decrease downstream of the channel. While for the V-rib-dimple cases, the presence of dimples greatly enhances the near-wall turbulent transport, helping keep the high local heat transfer downstream. (4) The presence of dimples between V-ribs reduces the shear stress magnitude on the sidewall, especially in upstream regions, which can result in the lower total flow friction for short channels.

Streamwise Evolution of Turbulent Flow and Heat Transfer over Channel Surfaces with V Ribs and V-rib-dimple Compound Turbulators

A NUMERICAL STUDY OF HEAT TRANSFER AND FLOW STRUCTURE IN CHANNELS WITH MINIATURE V RIB-DIMPLE HYBRID STRUCTURE ON ONE WALL

Turbulent Flow Structure and Heat Transfer Mechanisms over Surface Vortex Structures of Micro V-shaped Ribs and Dimples

Numerical Study of Heat Transfer and Flow Structure over Channel Surfaces Featuring Miniature V Rib-Dimples with Various Configurations

Heat Transfer Enhancement In A Rectangular Channel With The Combination Of Ribs, Dimples And Protrusions

Experimental and Numerical Study of Heat Transfer and Turbulent Flow in a Rotating Channel with V Rib-Dimple Hybrid Structures

Experimental Study and Numerical Analysis of Heat Transfer Enhancement and Turbulent Flow over Shallowly Dimpled Channel Surfaces

Experimental Study of Turbulent Flow and Heat Transfer Behaviors over a Micro-Rib-Dimple-Structured Surface

Turbulent Flow Characteristics and Heat Transfer Enhancement in a Square Channel with Various Crescent Ribs on One Wall

Experimental and Numerical Study of Heat Transfer and Flow Friction in Channels with Dimples of Different Shapes

Experimental Study of Turbulent Flow Heat Transfer and Pressure Loss over Surfaces with Dense Micro-Depth Dimples under Viscous Sublayer

Heat Transfer of Turbulent Flow over Surfaces with Spherical Dimples and Teardrop Dimples

Numerical Investigation of Flow and Heat Transfer in A Dimpled Channel among Transitional Reynolds Numbers

Flow And Heat Transfer In Microchannels With Dimples And Protrusions

The thermo-aerodynamic performance of turbulent channel flow over dimples of different sizes

Experimental and Numerical Investigation of Thermal Performance of Channels with Staggered Array-Based Dimples

Numerical Analysis of Flow Structure and Heat Transfer Characteristics in Dimpled Channels with Secondary Protrusions

Numerical Investigation on Heat Transfer Performance and Flow Characteristics in a Rectangular Air Cooling Channel (AR = 2) with Ridged Dimples

Experimental Study of Heat Transfer and Pressure Loss in Channels with Miniature V Rib-Dimple Hybrid Structure

Thermal Performance of Dimpled Surfaces in Laminar Flows

Numerical Study on Flow and Heat Transfer Performance of Rectangular Heat Sink with Compound Heat Transfer Enhancement Structures