Abstract:In the quest to integrate renewable energy sources like solar and wind into the electric grid efficiently, the development of long-duration energy storage (LDES) systems is paramount. The U.S. Department of Energy's Long Duration Storage Shot initiative is at the forefront of this endeavor, aiming to reduce the costs of grid-scale energy storage by 90% for systems with over 10 hours of operation. A key player in this mission is the non-aqueous redox flow battery (RFB), known for its use of earth-abundant materials and potential to meet these cost-reduction goals. However, the commercial viability of RFBs hinges on the development of high-performance, cost-effective membranes, which are crucial for their functionality and affordability. These membranes' ionic conductivity is vital for the power density of RFBs, while their ion selectivity and solvent uptake greatly influence the batteries' cycle life. Our team has made groundbreaking advancements in membrane technology for non-aqueous flow batteries. We've addressed the challenge of balancing ionic conductivity with mechanical strength in polymer electrolytes. Our findings reveal that enhanced solvent uptake while boosting membrane ionic conductivity, can compromise mechanical integrity. To counter this, we've employed two strategies: selective plasticization of the ion-conductive block in block copolymers and reinforcing the membrane's mechanical strength through hydrogen and ionic bonds with an inorganic scaffold. Significantly, we've also reduced the crossover of redox-active species in our membrane designs, notably decreasing polysulfide species crossover in a Na metal – polysulfide hybrid flow battery. This has led to improved capacity retention, Coulombic efficiency, and extended cycle life compared to traditional porous membranes. Our latest innovations include the development of hydrocarbon single-ion conductors, demonstrating enhanced conductivity and stability. We've also introduced crosslinking chemistry to control solvent uptake more effectively, thus improving ionic conductivity while preserving mechanical strength. Lastly, our pioneering tape casting method for producing ceramic-polymer composite membranes represents a major leap in scalable membrane production, paving the way for the practical application of non-aqueous redox flow batteries in long-duration energy storage. Acknowledgment This research was conducted at Oak Ridge National Laboratory, managed by UT Battelle, LLC, for the U.S. Department of Energy (DOE) and is sponsored by the U.S. Department of Energy through the Energy Storage Program in the Office of Electricity. We acknowledge Dr. Jagjit Nanda SLAC National Accelerator Laboratory for the fruitful discussions.

Microporous Polymer Membranes Tailored for Redox Flow Batteries

Recent Advances Andfuture Perspectives of Membranes in Iron-Based Aqueous Redox Flow Batteries

Polysulfide-Blocking Microporous Polymer Membrane Tailored for Hybrid Li-Sulfur Flow Batteries

(Invited) Innovating Sustainable, Cost-Effective, and Durable Redox Flow Battery Membranes

Development of efficient aqueous organic redox flow batteries using ion-sieving sulfonated polymer membranes

Long‐Life Aqueous Organic Redox Flow Batteries Enabled by Amidoxime‐Functionalized Ion‐Selective Polymer Membranes

High-efficient multifunctional electrochemical membrane for lithium polysulfide redox flow batteries

Ion‐selective Microporous Polymer Membranes with Hydrogen‐bond and Salt‐bridge Networks for Aqueous Organic Redox Flow Batteries

Thin Film Composite Membranes with Regulated Crossover and Water Migration for Long‐Life Aqueous Redox Flow Batteries

Selective Ion Conducting Polymers for Non-Aqueous Redox Flow Battery Applications

Tailoring Porous Structure in Non-Ionic Polymer Membranes Using Multiple Templates for Low-Cost Iron-Lead Single-Flow Batteries

Constructing Microporous Ion Exchange Membranes via Simple Hypercrosslinking for pH‐Neutral Aqueous Organic Redox Flow Batteries

Polysulfide-based redox flow batteries with long life and low levelized cost enabled by charge-reinforced ion-selective membranes

Ion Selective Bifunctional Metal–Organic Framework-Based Membrane for Lithium Metal-Based Nonaqueous Redox Flow Battery

All-polymer Particulate Slurry Batteries.

Ultra-microporous Anion Conductive Membranes for Crossover-Free Ph-Neutral Aqueous Organic Flow Batteries

Synthesis and Characterization of Lithium-Conducting Composite Polymer-Ceramic Membranes for Use in Nonaqueous Redox Flow Batteries

Poly(phenylene Oxide)-Based Ion-Exchange Membranes for Aqueous Organic Redox Flow Battery

Gradient‐Distributed Metal–Organic Framework–Based Porous Membranes for Nonaqueous Redox Flow Batteries

Redox Flow Battery Membranes: Improving Battery Performance by Leveraging Structure–Property Relationships

Sulfonated Microporous Polymer Membranes with Fast and Selective Ion Transport for Electrochemical Energy Conversion and Storage