Abstract:CO2 capture is essential for addressing dual-carbon strategies and achieving carbon neutrality. Membrane separation is favored for CO2 separation due to its high efficiency, low energy consumption, and operational convenience. Combining supported liquid membrane technology with ionic liquids (ILs) enables continuous CO2 separation from flue gas without requiring regeneration, simplifying processes, and reducing steps compared to pure IL absorption or adsorption methods. However, supported IL membranes suffer from liquid leakage. This study proposes a novel mechanism for CO2 capture using liquid-catched supported membranes (LCSMs). The LCSM was formed by adding a liquid-locking polymer layer to a porous support membrane. This study investigates the CO2 separation performance of LCSMs from the perspectives of material optimization and operational conditions. Sodium polyacrylate was selected as the liquid-locking polymer material based on molecular simulations. Experiments were conducted to investigate the effects of the support membrane type, liquid type, and liquid concentration on CO2 separation by LCSMs. Further experiments examined the influence of temperature, pressure, liquid concentration, and gas source composition on the separation performance of LCSMs. The optimal conditions for membrane fabrication and operation were determined. In addition, the transmembrane transport mechanism of CO2 separation using LCSMs was studied using molecular dynamics simulations, modeling analyses, and calculations. The simple solution-diffusion mechanism could not accurately describe the CO2 transmembrane transport behavior. A modified solution-ionization-diffusion mechanism was proposed to elucidate the CO2 transmembrane transport mechanism in LCSMs, showing good agreement with experimental results of CO2/N2 separation. Finally, a process for CO2 separation from the flue gas was developed. Preliminary calculations indicated that the capture energy consumption could be reduced to less than 2 GJ/tCO2, significantly lower than traditional absorption methods, with broader applicability and reduced footprint. This process is simpler, continuous, and less expensive. These results indicate that LCSMs are promising and novel methods for CO2 capture, offering an effective and economical solution for industrial applications.

Membrane Technologies for <scp> CO <sub>2</sub> </scp> Capture

Biocatalytic Membranes for Carbon Capture and Utilization

Membrane Technologies for Carbon Capture, Separation and Utilization (CCSU) – An Overview of Materials, Methods, Mechanisms, Merits and Challenges

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Research Progress of CO2 Recovery and Capture by Membrane Technology

Membrane-Based Technologies for Post-Combustion CO2 Capture from Flue Gases: Recent Progress in Commonly Employed Membrane Materials

Current status and advances in membrane technology for carbon capture

Influence of temperature and strain on phase growth process in Sn-3.0Ag-0.5Cu solder joints

Understanding the performance of membrane for direct air capture of CO2

Carbon dioxide capture: prospects for new materials.

Membrane Separation Processes and Post-Combustion Carbon Capture: State of the Art and Prospects

Boosting Membranes for CO2 Capture toward Industrial Decarbonization

Application of membrane separation technology in postcombustion carbon dioxide capture process

Membrane Processes for Direct Carbon Dioxide Capture From Air: Possibilities and Limitations

Sulfonated Chitosan Gel Membrane with Confined Amine Carriers for Stable and Efficient Carbon Dioxide Capture

Research progress in CO2 capture technology

Membrane-based carbon dioxide separation from flue gases of coal-fired power plant—current status and developments

Preparation and Transmembrane Transport Mechanism of Liquid-Catched Supported Membranes with High CO2 Separation Performance

Membrane technology for CO2 capture: From pilot-scale investigation of two-stage plant to actual system design

Facilitated Transport Membranes With Ionic Liquids for CO2 Separations

Insight and Comparison of Energy-efficient Membrane Processes for CO2 Capture from Flue Gases in Power Plant and Energy-intensive Industry