Abstract:The rate-determining step of the photoelectrochemical (PEC) water splitting is the water oxidation reaction at the photoanode, which is 4 orders of magnitude slower than the water reduction reaction at the photocathode. In a conventional process to accelerate the water oxidation, oxygen evolution cocatalysts (OECs) are usually used on the surface of a photoanode. As an alternative strategy, we considered employing a composite photoanode made up of a semiconductor and carbon spheres, for it is expected that the photogenerated electrons on the semiconductor particles can be captured by the carbon spheres as electron reservoirs and leave the photogenerated holes on the surface of the semiconductor particles, which promotes the effective separation of photogenerated electrons and holes. More importantly, the holes accumulated in the valence band accelerate the water oxidation reaction rate with the rapid release of electrons stored on the carbon sphere. Therefore, the composite photoanode achieves a higher photocurrent at a lower applied bias. We provide a proof of concept for this strategy by preparing a composite photoanode by combining bismuth vanadium oxide BiVO4 with carbon spheres and find that the resulting photoanode displays a remarkable enhancement in the rate of the photoanode water oxidation.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.0c03671?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.0c03671</a>.TEM image of CSs and SEM image of a special C-BVO sample; top-view SEM images of BVO and C-BVO photoanodes; HRTEM image of the as-prepared C-BVO photoanode; Tauc plots of BVO and C-BVO based on the diffuse reflectance spectra; DRS of BVO containing different amounts of CSs and zoomed-in view of the absorption spectra; cyclic voltammograms of the BVO and C-BVO photoanodes under dark and light and the charge–discharge curve of the C-BVO photoanode under dark and light; surface potential mapping of the BVO and C-BVO photoanodes; cyclic voltammograms and calculated specific capacitances of 0.25C-BVO, 0.5C-BVO, C-BVO, and 2C-BVO photoanodes; J vs V curves measured for the BVO, C-BVO, and CoPi-BVO photoanodes and for BVO photoanodes containing different amounts of CSs; J vs V diagrams of three additional BVO and C-BVO photoanodes; comparison of the AM 1.5G sunlight spectrum and UV–vis absorption spectra of the BVO and C-BVO photoanode; close-ups of the stability tests of BVO and C-BVO photoanodes; transient open circuit voltage vs time plots of BVO and C-BVO photoanodes measured at light and dark; measured H2/O2 evolution of C-BVO and BVO photoanodes; J vs V plots of BVO and C-BVO photoanodes measured in KPi and KPi + NaVO3 solution and tested at 0.9 V vs RHE in KPi and KPi + NaVO3 solution; comparison of the J vs V plots of BVO photoanodes compounded with carbon quantum dots and carbon spheres; model diagrams of the specific mechanism of charge and discharge of the C-BVO photoanode and a possible mechanism on the enhancement of the PEC water oxidation of the C-BVO photoanode; and separation and injection efficiencies of BVO and CQD-modified BVO photoanodes (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.0c03671/suppl_file/cs0c03671_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Efficient Oxygen Evolution Reaction on Polyethylene Glycol-Modified BiVO4 Photoanode by Speeding Up Proton Transfer.

Efficient Oxygen Evolution Reaction on Polyethylene Glycol‐Modified BiVO <sub>4</sub> Photoanode by Speeding up Proton Transfer (Small 30/2022)

Dual Modification of BiVO4 Photoanode by Enriching Bulk and Surface Oxygen Vacancies for Enhanced Photoelectrochemical Performance.

Enhancing the Photoelectrochemical Water Oxidation Reaction of BiVO4 Photoanode by Employing Carbon Spheres As Electron Reservoirs

High-Performance Ultrathin BiVO4 Photoanode on Textured Polydimethylsiloxane Substrates for Solar Water Splitting

Porphyrins‐Assisted Cocatalyst Engineering with CoOV Bond in BiVO4 Photoanode for Efficient Oxygen Evolution Reaction

Enhancing the Photoelectrochemical Water Oxidation Reaction of BiVO 4 Photoanode by Employing Carbon Spheres as Electron Reservoirs

Regulating the Binding Strength of Oxygen Intermediates with a Conductive Π–d Conjugated Metal-Organic Polymer CoTAA on BiVO4 Photoanode for Efficient Photoelectrochemical Water Oxidation

A Molecular Cobaloxime Cocatalyst and Ultrathin FeOOH Nanolayers Co-Modified BiVO 4 Photoanode for Efficient Photoelectrochemical Water Oxidation

Enhanced bulk and interfacial charge transfer in Fe:VOPO4 modified Mo:BiVO4 photoanodes for photoelectrochemical water splitting

Charge Transport Enhancement in BiVO4 Photoanode for Efficient Solar Water Oxidation

Oxygen vacancy-abundant carbon quantum dots as superfast hole transport channel for vastly improving surface charge transfer efficiency of BiVO4 photoanode

Synergistic Effect of Co3(HPO4)2(OH)2 Cocatalyst and Al2O3 Passivation Layer on BiVO4 Photoanode for Enhanced Photoelectrochemical Water Oxidation

Surface Recombination Passivation of the BiVO4 Photoanode by the Synergistic Effect of the Cobalt/Nickel Sulfide Cocatalyst

Synergistic Surface Engineering of BiVO4 Photoanodes for Improved Photoelectrochemical Water Oxidation

Systematic engineering of BiVO4 photoanode for efficient photoelectrochemical water oxidation

In-situ and synchronous generation of oxygen vacancies and FeOx OECs on BiVO4 for ultrafast electron transfer and excellent photoelectrochemical performance

Boosting the Performance of BiVO4 Photoanodes by the Simultaneous Introduction of Oxygen Vacancies and Cocatalyst Via Photoelectrodeposition.

Photogenerated charge separation at BiVO4 photoanodes enhanced by a Ag-modified porphyrin polymer skeleton

Facile Synthesis of a Micro–Nano-Structured FeOOH/BiVO4/WO3 Photoanode with Enhanced Photoelectrochemical Performance

Tailored BiVO4 Photoanode Hydrophobic Microenvironment Enables Water Oxidative H2O2 Accumulation