Abstract:In long-term operation, buried pipelines are prone to corrosion, deformation, and fracture, resulting in leakage. It will cause serious environmental pollution and economic loss. Distributed temperature sensing (DTS) and location method based on temperature signals have been gradually applied to the pipe network. However, the DTS is difficult to comprehensively monitor pipeline leakage and has blind monitoring areas. In addition, fiber optics are difficult to capture continuous low-temperature changes because of the heat dissipation of soil porous media. Thus, distributed acoustic sensing (DAS) is needed to assist the comprehensive monitoring. The acquisition of acoustic signals caused by the leakage field is of great significance to the study of pipeline leakage monitoring methods. In this paper, the attenuation model of leakage acoustic amplitude is established, and the law of vibration acoustic signal in porous soil is studied. Based on the real natural gas leakage test, the characteristic parameters of the time-domain acoustic wave signal are studied. It is proved that the vibration acoustic signal is a kind of acoustic wave caused by the transient mass loss at the beginning of leakage. The main conclusions are as follows: the time-domain signal amplitude is large and the vibration is obvious when pipeline leakage occurs. Acoustic wave leakage occurs in a very short time and acoustic vibration amplitude reaches its peak. Subsequently, the pipeline is in a stable leakage state, and the waveform continues to expand. When there is no natural gas leakage, the vibration signal intensity is less than 3000, and the amplitude changes little. The difference is that when the pipeline leaks, the vibration test curve signal has obvious bulge and fluctuation, and the vibration signal intensity is basically above 4000. The amplitude of the vibration signal increases with the increase of the leakage hole. The research results provide a theoretical basis for the field application of distributed optical fiber acoustic detection.

Field Test of Online Leakage Noise Monitoring for Pressure Water Pipeline

In-Situ Leak Detection in Urban Water Supply Pipelines Using Flexible Vibration Sensors

Experimental study on leakage monitoring of pressurized water pipeline based on fiber optic hydrophone

Signals Denoising of Leakage Pressure in Water Supply Pipelines Using an Improved Wavelet Filter Algorithm

Numerical and Experimental Research on Vibration Signal Characteristics of Water Pipeline Leakage

Experimental Investigation into the Acoustic Characteristics of the Ground Surface Response Due to Leakage in Buried Water-Filled Pipelines

Leakage detection method of underground heating pipeline based on improved wavelet threshold function

Leak Detection and Location of Pipelines Based on LMD and Least Squares Twin Support Vector Machine

Numerical and experimental study on leakage detection for buried gas pipelines based on distributed optical fiber acoustic wave

Distributed Leak Monitoring System for Water Pipelines

Numerical Simulation of Leakage Noise Field for Solenoid Valve

Experimental Study of Pipeline Leak Detection Based on Hoop Strain Measurement

Experimental Investigation on Characteristics of Leak Noise in Gas Pipeline Systems

Research on the Early Warning Method of Water Delivery Pipeline Detonation Based on High-frequency Water Pressure Monitoring

Leakage detection in a buried gas pipeline based on distributed optical fiber time-domain acoustic wave signal

Numerical and Experimental Study on Propagation Attenuation of Leakage Vibration Acceleration Signal of the Buried Water Pipe

Research on underwater pipeline leakage monitoring based on distributed fiber optic acoustic sensing technology

Study on On-line Monitoring of Valves leakage

Research on Noise Reduction Method for Leakage Signal of Water Supply Pipeline

Analysis of Propagation and Distribution Characteristics of Leakage Acoustic Waves in Water Supply Pipelines

Experimental Test of Pressure Variation and Leakage Location in Petroleum Pipeline Leakage Process