Abstract:Sorption-enhanced steam reforming of ethanol (SE-SRE) with in-situ CO2 removal is an environmentally friendly and sustainable approach for hydrogen production. Researches on continuous production of high-purity H2 by SE-SRE over the modified Li4SiO4 sorbent were conducted using two parallel reactor in this work. The low cost Li4SiO4 derived from rice husk ash (RHA) is a promising high-temperature CO2 sorbent. However, the poor adsorption kinetics of RHA-Li4SiO4 sorbent at low CO2 concentration is the major challenge. The metallic elements (K, Ca, Al, Mg) were employed to modify the RHA-Li4SiO4 for efficient CO2 capture. The developed sorbents were characterized and tested to study the role of dopants on the crystal, textural, microstructure and CO2 adsorption kinetics and cyclic stability. Results indicated that K doping effectively inhibited the growth of crystal aggregation and resulted in a fluffy morphology with abundant pores and higher specific surface area, while the addition of Ca, Al and Mg formed a nubby structure with larger particle size. K-doped RHA-Li4SiO4 exhibited the best CO2 uptake properties and the optimal K doping molar content was 0.02 with the maximum capture capacity of 34.16 wt%, which is higher than 27.1 wt% of pure RHA-Li4SiO4. Then, the effect of operating conditions on the enhancement behaviors was considered in the SE-SRE system. High-purity H2 (above 96%) was achieved by coupling K(0.02)/RHA-Li4SiO4 sorbent with Ni-based catalyst under the optimum condition (T: 525 °C, liquid hourly space velocity: 0.9 mL/(g·h), sorbent/catalyst: 4 and steam/carbon: 8.0). The adsorption activity of K(0.02)/RHA-Li4SiO4 maintained at a high level in ten SE-SRE/regeneration cycles. Finally, a scheme including two parallel fixed-bed reactors was designed and operated periodically for continuous production of high-purity H2. The reaction switching time was shown to depend strongly on the pre-breakthrough time and operating conditions. As the reaction switching time was 40 min, the products were always only H2 and CH4 (no CO and CO2 appear) and the H2 purity remained above 90% during 400 min, confirming high purity hydrogen stream can be obtained continuously.

High-purity H<sub>2</sub> production by sorption-enhanced water gas shift on a K<sub>2</sub>CO<sub>3</sub>-promoted Cu/MgO–Al<sub>2</sub>O<sub>3</sub> difunctional material

High-purity H<sub>2</sub> production by sorption-enhanced water gas shift on a K<sub>2</sub>CO<sub>3</sub>-promoted Cu/MgO-Al<sub>2</sub>O<sub>3</sub> difunctional material

Production of High-Purity H2 Through Sorption-Enhanced Water Gas Shift over a Combination of Two Intermediate-Temperature CO2 Sorbents

Sorption-Enhanced Steam Reforming of Glycerol for Hydrogen Production over a NiO/NiAl2O4 Catalyst and Li2ZrO3-Based Sorbent

Sorption-enhanced Water Gas Shift Reaction by in Situ CO2 Capture on an Alkali Metal Salt-Promoted MgO-CaCO3 Sorbent

H2 production via sorption-enhanced water-gas-shift using bimetallic catalysts doped CaO-Ca12Al14O33: Experiment and density functional theory study

Revealing the Role of MgO in Sorption‐Enhanced Water Gas Shift Reaction for H2 Production: A DFT Study

Characterization on Trace Carbon Monoxide Leakage in High Purity Hydrogen in Sorption Enhanced Water Gas Shifting Process

High-purity hydrogen production from biogas by sorption-enhanced steam reforming over Ni-MgO-CaO bifunctional catalyst with paper fiber as template

Continuous high-purity hydrogen production by sorption enhanced steam reforming of ethanol over modified lithium silicate

High-purity hydrogen production by sorption-enhanced methanol steam reforming over a combination of Cu–Zn–CeO2–ZrO2/MCM-41 catalyst and (Li–Na–K) NO3·MgO adsorbent

Development of A Combined Catalyst and Sorbent for the Water Gas Shift Reaction

Enhanced H2 Recovery by Coupling the Water-Gas Shift Reaction with in-situ CO2 Capture and Mineralization using Earth Abundant Ca- and Mg-Silicates and Hydroxides

Efficient CO2 Removal for Ultra‐Pure CO Production by Two Hybrid Ultramicroporous Materials

Simultaneous Removal of Hg0 and H2S at a High Space Velocity by Water-Resistant SnO2/carbon Aerogel.

High efficiency CO adsorbent CuCl/zeolite

Synergistic effect of Cu+ single atoms and Cu nanoparticles supported on alumina boosting water-gas shift reaction

A Sustainable Design of ZnO-based Adsorbent for Robust H2S Uptake and Secondary Utilization As Hydrogenation Catalyst

Deep Removal of COS and Hg 0 by Carbon Aerogel in Natural Gas: Good Antipoisoning Properties as well as Synergy Effect at Low Temperatures on 0.9PPD-Cu/CA Adsorbent

Steam Methane Reforming Reaction Enhanced by a Novel K2CO3-Doped Li4SiO4 Sorbent: Investigations on the Sorbent and Catalyst Coupling Behaviors and Sorbent Regeneration Strategy

High-throughput Design of Complex Oxides As Isothermal, Redox-Activated CO2 Sorbents for Green Hydrogen Generation