Abstract:Poria cocos has a long history of medicinal use in China. It is a kind of edible and pharmaceutical mushroom. Drying process usually affects the chemical and physical properties of the extracts of Traditional Chinese Medicine (TCM). Quality control remains a big issue, affecting herbs, formulations, and even the practice of TCM.Poria cocos generally takes almost 7 days to be dried by traditional natural drying and is sensitive to microbial spoilage.Poria cocos blocks (15 mm × 15 mm × 15 mm) are also easily broken at the traditional hot air drying, such as oven drying. A promising solution to the problem is to take advantage of innovative process techniques including alternative drying methods in the pharmaceutical processing. In this work,poria cocos was dried by medium and short infrared wave drying combined with air impingement drying. Dincer’s model was also applied to the drying process and the lag factor (G), drying coefficient (S), Biot number (Bi), moisture effective diffusivity velocity (Deff), mass transfer coefficient (k) were analyzed. TheDeff was also calculated based on Weibull function and Fick’s second law, and there was difference among them. Combined with the GB-4857.5 T-1992Droping Test Method and Pharmacopoeia of People’s Republic of China, the broken rate and the extractum ofporia cocos under different drying conditions were tested. The main results were as follows: 1) Compared with air impingement drying, drying time was shortened by infrared radiation combined with air impingement drying technology, and It could reduce the broken rate by 18% and improve the extractum mass fraction by 1%; the drying process also occurred in the falling rate period; at the range of the testing parameters, the drying rate increased with the increase of temperature and wind speed, but there was not direct correlation between broken rate, extractum content and drying conditions. 2) TheG values of different drying methods were between 1.0136 and 1.0202, steady around 1. Drying coefficient was related to material drying speed; the higher temperature and wind speed, the faster drying ratio and drying coefficient was also larger. 3) The range of combined drying technology’s Biot number was 0.0826-0.0982, lower than 0.1, which indicted the drying process was mainly influenced by external resistances. The range of mass transfer coefficient was 1.0319×10-6-1.8003×10-6 m/s. 4) TheDeff calculated by Fick’s law, Weibull function and Dincer’s model showed a certain regularity, and all of them increased with the increase of temperature and wind speed. Fick’s law and Weibull function didn’t have relation with external resistances; and Fick’s law didn’t require drying curve in “exponential form”, but only was applied in the falling rate drying process. Weibull function and Dincer’s model had a broader application, but they needed drying curve must be exponential fitting. In summary, infrared radiation combined with air impingement drying technology can improve the quality ofporia cocos. The results provide a reference for the application of Dincer’s model onporia cocos drying, and help people to analyze drying process and gain the best drying method.

Effect of Different Temperature and Humidity Stress Combined with Steaming on the Quality of Poria Cocos Peel

Effects of Different Pretreatments on Quality Attributes of Poria Cocos

Untargeted Metabolomics Analyze the Effect of Stress Sweating Pretreatment on the Phytochemicals of Poria Cocos

Enhancement of Quality Attributes of Dried Poria Cocos Wolf Cubes by Stress Sweating Combined with Steam Pretreatment

Evaluation of quality attributes of different parts of Poria cocos during stress sweating process based on AHP-EWM and RSM

Evaluation of Different Pretreatments for Poria Cocos

Comparison of Different Pretreatments on the Drying Behavior of Poria Cocos Cubes

Effects of processing methods on the aroma of Poria cocos and its changing regulations during processing

Influence of Heat Treatment on Quality and Physiology of Lightly Processed Bamboo Shoot

Effects of Exogenous SA Pretreatment on Thermotolerance and Photosynthesis in Pakchoi under High Temperature Stress

Evaluation of different processing modes for postharvestPoria cocos

Constant temperature and humidity combined with vacuum-steam pulsed steaming of Polygonatum cyrtonema rhizome: Quality attribute and browning mechanism

Changes in the Volatile Flavor Substances, the Non-Volatile Components, and the Antioxidant Activity of Poria cocos during Different Drying Processes

Effect of High-Humidity Hot Air Impingement Steaming on Cistanche deserticola Slices: Drying Characteristics, Weight Loss, Microstructure, Color, and Active Components

Effects of High Temperature Stress on the Physiological and Biochemical Characteristics of Paeonia ostii

Short-term steaming during processing impacts the quality of Citri Reticulatae 'Chachi' peel

Effects of steam on polysaccharides from Polygonatum cyrtonema based on saccharide mapping analysis and pharmacological activity assays

Minerals, Phenolic Compounds, and Antioxidant Capacity of Citrus Peel Extract by Hot Water

Improving Quality Ofporia Cocos Using Infrared Radiation Combined with Air Impingement Drying

Quality Evaluation of Polygonatum cyrtonema Hua Based on UPLC-Q-Exactive Orbitrap MS and Electronic Sensory Techniques with Different Numbers of Steaming Cycles

Revealing Color Change and Drying Mechanisms of Pulsed Vacuum Steamed Cistanche Deserticola Through Bioactive Components, Microstructural and Starch Gelatinization Properties