Abstract:Tetragonal (1-x)(Bi,Na)TiO3-xBaTiO3 films exhibit enhanced piezoelectric properties due to domain switching over a wide composition range. These properties were observed over a significantly wider composition range than the morphotropic phase boundary (MPB), which typically has a limited composition range of 1-2%. The polarization axis was found to be along the in-plane direction for the tetragonal composition range x = 0.06-1.0, attributed to the tensile thermal strain from the substrate during cooling after the film formation. A "two-step increase" in remanent polarization against an applied maximum electric field was observed at the high-field region due to the domain switching, and a very high piezoelectric response (effective d33 value, denoted as d33,f) over 220 pm/V was achieved for a wide composition range of x = 0.2-0.5 with high tetragonality, exceeding previously reported values for bulk ceramics. Moreover, a transverse piezoelectric coefficient, e31,f, of 19 C/m2 measured using a cantilever structure was obtained for a composition range of at least 10 atom % (for both x = 0.2 and 0.3). This value is the highest reported for Pb-free piezoelectric thin films and is comparable to the best data for Pb-based thin films. Reversible domain switching eliminates the need for conventional MPB compositions, allowing an improvement in the piezoelectric properties over a wider composition range. This strategy could provide a guideline for the development of environmentally acceptable lead-free piezoelectric films with composition-insensitive piezoelectric performance to replace Pb-based materials with MPB composition, such as PZT.

Enhancement of piezoelectricity in spin-coated Bi<sub>1/2</sub>Na<sub>1/2</sub>TiO<sub>3</sub>-BaTiO<sub>3</sub> epitaxial films by strain engineering

Enhancement of Piezoelectricity in Spin-Coated Bi1/2Na1/2TiO3-BaTiO3 Epitaxial Films by Strain-Engineering

Enhanced Electric-Field-induced Strain in 0.7bi(1−x)smxfeo3–0.3batio3 Lead-Free Ceramics

Piezoelectric And Strain Properties Of Ba(Ti1-Xzrx)O-3 Ceramics

Effect of Crystal Orientation on the Phase Diagrams, Dielectric and Piezoelectric Properties of Epitaxial BaTiO3 Thin Films

Anisotropic strain-modulated monoclinic phases with giant piezoelectricity in high-index-oriented PbTiO3 films

Orientation Dependence on Piezoelectric Properties of Bi0.5Na0.5TiO3-BaTiO3-SrTiO3 Epitaxial Thin Films

Lattice distortion induced by rare‐earth ions doping in (Bi0.5Na0.5)TiO3‐based thin films with high piezoelectric properties

Electric Field-Induced Giant Strain and Piezoelectricity Enhancement Effect in (bi1/2na1/2)0.935+xba0.065ti1−x(pr1/2nb1/2)xo3 Lead-Free Ceramics

High strain in (Bi1/2Na1/2)0.935Ba0.065TiO3–Sr3FeNb2O9 lead-free ceramics with giant piezoresponse

Enhancement in electromechanical properties of piezoelectric thin film through strain-induced domain alignment

Enhanced Field-Induced-strain by Maximizing Reversible Domain Switching Contribution Via Eliminating Negative Strain in (Na0.5bi0.5)tio3-Based Ceramics

Large strain improvement of lead-free (1−x) Bi0.5Na0.42K0.08Zr0.02Ti0.98O3–xBa(Nb0.5Fe0.5)O3 piezoelectric ceramics

High strain in Bi0.5Na0.5TiO3-based relaxors by adding two modifiers featuring with morphotropic phase boundary

The Effect of Stress on the Piezoelectric Properties of BNT–BT–ST Thin Films

Giant electromechanical strain response in lead‐free SrTiO3‐doped (Bi0.5Na0.5TiO3–BaTiO3)–LiNbO3 piezoelectric ceramics

Giant electric field-induced strain and structure evolution of NaTaO3-modified 0.94(Bi0.5Na0.5)TiO3-0.06BaTiO3 Pb-free ceramics

Strain-driven high energy storage in BaTiO3-based lead-free epitaxial thin films

Enhanced Electric Field-Induced Strain Properties in Lead-Free BF-BT-Based Piezoceramics by Local Structure Inhomogeneity

Structural origin for the high piezoelectric performance of (Na0.5Bi0.5)TiO3-BaTiO3-BiAlO3 lead-free ceramics

Achieving High Piezoelectric Performance across a Wide Composition Range in Tetragonal (Bi,Na)TiO3-BaTiO3 Films for Micro-electromechanical Systems