Abstract:Tristructural-isotropic (TRISO) fuel particles have long been widely used in high temperature gas-cooled reactors (HTGR), where their high temperature mechanical integrity and ability to retain fission products even in the accident conditions are the critical safety issues. In the present work, TRISO particles were subjected to ultra-high temperature thermal treatments at 1900, 2000, and 2200 degrees C, respectively, which were much higher than the projected accident temperature (1620 degrees C). Phase compositions and microstructures of the samples before and after thermal treatments were studied by X-ray diffraction (XRD), Raman spectroscopy, and Scanning Electron Microscopy (SEM). Nano hardness and Young's modulus of the SiC layer in TRISO particles were studied by nano indentation technique, and crushing strength of the TRISO particles was evaluated by mechanical crush tests. The results show that, there were no obvious temperature effects on phase composition and microstructure, except for SiC layer in the sample thermal treated at 2200 degrees C, in which many pores caused by SiC decomposition were observed. The nano hardness and Young's modulus values of SiC layer in the as-received and thermally treated TRISO particles were similar within the experimental error. On the other hand, the crushing strength of the thermally treated TRISO particles decreased greatly as compared with the as-received particles, but the crack propagation mode changed from through-the-particle to deflection inside the buffer PyC layer or between buffer PyC and inner PyC (IPyC) layers. The change of crack propagation mode could probably due to the shrinkage of PyC layers due to anisotropy at high temperature and ordering of graphitization of IPyC layers, which probably weakened the interfacial bonding between the IPyC and the buffer PyC layers. The results of this study provide a database reference for the performance of TRISO particles under ultra-high temperature operation and even accident conditions. (C) 2022 Elsevier B.V. All rights reserved.

Transport Behavior of Silver in High-Temperature Gas-Cooled Reactors

The transport behavior of typical metallic fission products in HTGRs

An Original Way to Investigate Silver Migration Through Silicon Carbide Coating in TRISO Particles

MD Simulation and Transport Property Analysis of Silicon in High-Temperature Molten Fluoride Salts Electrolyte

Near-surface and Bulk Behavior of Ag in SiC

Multiscale, mechanistic modeling of irradiation-enhanced silver diffusion in TRISO particles

Ag Out-Surface Diffusion in Crystalline SiC with an Effective SiO2 Diffusion Barrier

Diffusion and Thermo-Driven Migration of Silver, Palladium, and Ruthenium Nanoparticles in Cubic SiC Matrix Using Molecular Dynamics

First-principle Studies of Radioactive Fission Productions of Cs/Sr/Ag/I Adsorption on Silicon Carbide in HTGR

Study on the Effective Diffusion Coefficient of Inert Gases in Porous Graphite Materials

Study on cumulative fractional release of radionuclides in HTGR fuel particles

Study of SiC layer with fine grains in HTGR coated fuel particles

RESEARCH ON TRITIUM BEHAVIOR ISSUES IN HIGH-TEMPERATURE GAS-COOLED REACTORS

Irradiation-Thermal-Mechanical Coupling Behaviors of a Typical TRISO/SiC Fuel Element Based on Actual Distribution

Study on Chemical Kinetics of Carbon Migration in Superalloys in the Non-Pure Helium Environment in High Temperature Gas Cooled Reactors

Analysis of Fission Product Diffusion Behavior of Fully Ceramic Micro-encapsulated Fuel

The Study of Irradiation-Induced Failure Behavior for the TRISO-coated Fuel Particle in HTGR

Diffusion of fission products in nuclear graphite: A review

First-Principles Studies of Diffusion Behaviors of Tritium in HTR-PM Materials: from Framework to Preliminary Result

Impact of Temperature Variations on BISON Predictions of Ag Release in AGR-1 and AGR-2 Experiments

Effect of Ultra-High Temperature Treatment on Microstructures and Mechanical Properties of TRISO Particles