Abstract:With the aim to enhance the phase shift range and bandwidth of the novel Inverted-E topology for single-bit and multi-bit phase shifters, this work proposes a new structure, wherein the Main Transmission Line (MTL) in the Inverted-E topology is replaced by a tunable transmission line with a fixed open circuited stub loaded at its center point. Therefore, offering four design freedoms, precisely the characteristic impedances and electrical lengths of the transmission line and the fixed open circuited stub, that provides it the flexibility to achieve much smaller susceptance values for large phase shifts up to 180°. The required susceptances are realized using three symmetric open or short-circuited stubs, which are loaded to the tunable transmission line using switching p-i-n diodes. The fixed open circuited stubs ensure excellent circuit matching to the port impedance of in the OFF-state, without the need of any additional matching network. Whereas, the enhanced design flexibility enables the realization of compact dimensions and lower insertion loss. A systematic design procedure is developed, supported by detailed design theory and mathematical formulations, followed by validation through analysis and simulations of typical 22.5°, 45°, 90° and 180° digital phase shifters. For experimental verifications, 90° and 180° designs are manufactured at center frequency of 2.4 GHz and a good agreement is observed with theory and simulations. The results indicate compact dimensions of and , corresponding insertion losses of 1.7 dB and 2.85 dB with phase error less than 1° at center frequency. Moreover, the phase variation is observed to be 2° and 5°, in bandwidths of 400 MHz and 100 MHz respectively.

Design of a Switch Type Phase Shifter Using Lumped Components

Hybrid broadband high-precision phase shifter integrated circuit

29-/35 GHz Dual-band High-Gain Phase Shifter with Hybrid -Networks

Design of 180°-Switched-line Phase Shifter with Constant Phase Shift Using CRLH TL

Novel Phase Shifters Using Short-Circuited Cross-Slotted Patch Resonator

Design of High Power Capacity Phase Shifter with Composite Right-Left-handed Transmission Line

Design and Synthesis of Reconfigurable Filtering Phase Shifter Using Optimization of Coupling Matrix

Inverted-E Type Phase Shifter Using Fixed Stub-Loaded Main Line: Enhanced Bandwidth and Phase Shift Range

A 360$^{\circ}$ Low Phase Error Tunable Phase Shifter With High-Pass and Low-Pass Networks Based on SISL

A Broad-Band Analog Phase Shifter Design on I-Q Vector Modulator

Design of Ultraflat Phase Shifters Using Multiple Quarter-Wavelength Short-Ended Stubs

Design of wideband 90° phase shifter using compact CRLH structure

Synthesis Design of Wideband Phase Shifters Using Coupled-Line Structure

A DMTL Phase Shifter Using Insulation Layer and Saw-Shaped CPW

A New Wide-Band 180&#x00b0; Planar Phase Shifter Network

A COMPACT PHASE SHIFTER WITH WIDE PHASE RANGE USING LOADED TRANSMISSION LINE

A Novel Wideband 90° Filtering Phase Shifter Using Broadside-Coupled MSLs

Design Of An X-Band 6-Bit Phase Shifter

A New Broadband Differential Phase Shifter Fabricated Using a Novel CRLH Structure

Wideband Multibit Phase Shifter Based on SCRLH-TL

An X-band 22.5°/45° Digital Phase Shifter Based on Switched Filter Networks