Abstract:The physical and mechanical properties of rocks change significantly after being subjected to high temperatures, which poses safety hazards to underground projects such as coal underground gasification. In order to investigate the effect of temperature on the macroscopic and microscopic properties of rocks, this paper has taken sandstone as the research object and conducted uniaxial compression tests on sandstone specimens at different temperatures (20–1000 °C) and different heating rates (5–30 °C/min). At the same time, the acoustic emission (AE) test system was used to observe the acoustic emission characteristics of the rock damage process, and the microstructural changes after high temperature were analyzed with the help of a scanning electron microscope (SEM). The test results show that the effect of temperature on sandstone is mainly divided into three stages: Stage I (20–500 °C) is the strengthening zone, the evaporation of water and the contraction of primary fissures, and sandstone densification is enhanced. In particular, the compressive strength and elastic modulus increase, the macroscopic damage mode is dominated by shear damage, and the fracture micromorphology is mainly brittle fracture. Stage II (500–600 °C) is the transition zone, 500 °C is the threshold temperature for the compressive strength and modulus of elasticity, and the damage mode changes from shear to cleavage damage, and the sandstone undergoes brittle–ductile transition in this temperature interval. Stage III is the physicochemical deterioration stage. The changes in the physical and chemical properties make the sandstone compressive strength and modulus of elasticity continue to decline, the macroscopic damage mode is mainly dominated by cleavage damage, and the fracture microscopic morphology is of a more toughness fracture. The effect of different heating rates on the mechanical properties of sandstone was further studied, and it was found that the mechanical properties of the rock further deteriorated under higher heating rates.

Effect of Temperature and Strain Rate on the Brittleness of China Sandstone

Research on Brittleness Characteristic Coefficient of Thermal Damage Rock Based on Postpeak Stage of Stress‐Strain Curve

Research on the evaluation method of rock brittleness characteristics based on stress-strain curve

The Influence of Temperatures on the Mechanical Properties and Fracture Behavior of Rocks under Mixed Mode I/II Loading

Influences of confining pressure, strain rate and temperature on crack damage stress thresholds and shape parameter m in sandstone: a review

Experimental Study on the Effect of Brittleness on the Dynamic Mechanical Behaviors of the Coal Measures Sandstone

Dynamic Splitting Experimental Study on Sandstone at Actual High Temperatures under Different Loading Rates

Effect of high temperature on the brittleness index of granite: an experimental investigation

Study on dynamic fracture properties of sandstone under the effect of high-temperature using large-scale sample

Fracture properties and dynamic failure of three-point bending of yellow sandstone after subjected to high-temperature conditions

Pore characteristics and mechanical properties of sandstone under the influence of temperature

Experimental study on mechanical and acoustic emission characteristics of sedimentary sandstone under different loading rates

Effects of high temperature on the mechanical behaviors of sandstone under true-triaxial unloading conditions

Brittleness evaluation and damage evolution of sandstone under hydromechanical coupling

The impact of high temperature on mechanical properties and behaviors of sandstone

The Influence of the Strain Rate and Prestatic Stress on the Dynamic Mechanical Properties of Sandstone—A Case Study from China

Mechanical behavior and fracture characteristics of high-temperature sandstone under true triaxial loading conditions

Physical and Mechanical Properties and Damage Mechanism of Sandstone at High Temperatures

Effect of Loading Rate and Water on the Dynamic Fracture Behavior of Sandstone under Impact Loadings

MECHANICAL PROPERTIES OF SANDSTONE SUBJECTED TO COUPLING OF TEMPERATURE–SEEPAGE–STRESS

Characterization of the Brittleness of Hard Rock at Different Temperatures Using Uniaxial Compression Tests