Abstract:A numerical model describing the ballistic behavior of a commercially used initiator is presented in this article. This model was built on the principle of conservation of mass and energy in the multi-phase framework incorporated with multi-loaded conditions. After obtaining the information about the grain size distribution in each composite, a fixing factor was proposed based on the surface area ratio of the composites. Thus, the solid propellant burning process based on distributed grain size was described, and the burn rate parameters of the applied pyrotechnic compositions were re-evaluated for different preconditioned temperature levels according to Vieille’s law. The influence of bridge wire and initiator metal cap was further modeled concerning their characteristic properties according to the observed measurements. The validation of the entire initiator model in the closed bomb test showed quantitative agreement with the measured pressure evolution, while the parameter study for evaluating the ballistic sensitivity of each component delivered some insights into the product development process. Furthermore, the configuration of a cold gas inflator was utilized to evaluate the initiator impact for a realistic application, where the shock wave intensity during deployment serves the main function in the inflator design. Incorporated with CFD simulations to capture the shock wave propagation, 0D-3D coupling strategy for initiator ballistics to inflator configuration was realized. Besides, the simulation results reflected the physical conditions in a proper manner. In particular, the parameter study led to a better understanding of interactions between inflator components, which were barely possible to be quantified through the measurements. The proposed initiator model could also be used in combination with other mechanical principles as a component of pyrotechnic devices such as pin-puller, electric line cutters, or airbag inflators. The detailed information gained in describing the physical properties enabled us to assess the existing design quantitatively and to have better control of the product quality.

Numerical Simulation and Characteristics Analysis on lgnition and Flame-propagation Process of Modular Charge Based on CE/SE Method

Study on unsteady combustion and propelling mechanism of modular charge based on Euler–Lagrange method

Visualization experiment on the ignition performance and flame-spreading in different charging structures

Interior ballistic two-phase flow model and its calculation for a mixed charge structure

Effects of module number and firing condition on charge thermal safety in gun chamber

Namerical Simulation on Factors Affecting Ignition Characteristics of A New Engine

Numerical simulation of the effect of multiple factors on the ignition process of a solid rocket motor

Numerical Investigation On Characteristics Of The Shock Wave Generated By An Annular Nested Charge

Numerical Modeling and Studies of Ignition Transients in End-Burning-Grain Solid Rocket Motors

Shooting Security Analysis of Counter-Mass Propelling Gun with Large Caliber and High Muzzle Velocity

Optimization Simulation of Ignition and Flame Spreading Based on Two-phase Flow Theorem

Numerical Investigation of Pyrotechnical Initiators and Their Impact in Airbag Inflator Applications: Ballistic Modeling and Functional Analysis

Numerical simulation and optimized design of a launching system with a novel charge structure

Experimental Study on Plasma Ignited Single-base Propellant Using SEM and EDS

Numerical simulation of spontaneous combustion of propellant powder under restrictive conditions

Study On The Influences Of Ignition Position On The Formation Of Shaped Charge With Double-Layer Spherical Segment Liners

Research on the Dynamic Model of Plasma Ignition Process of Solid Propellant

Numerical Simulation of Conical Shaped Charge Jet Formation Process

Identifying the Enhancement Mechanism of Al/MoO3 Reactive Multilayered Films on the Ignition Ability of Semiconductor Bridge Using a One-Dimensional Gas-Solid Two-Phase Flow Model

Application of Transient Burning Rate Model of Solid Propellant in Electrothermal-Chemical Launch Simulation

Numerical study on spark characteristics and evolution of plasma jet igniter