Abstract:<section class="article-section__content">Nanoscale morphology of the active layer plays a crucial role in the power conversion efficiency (PCE) and stability of polymer solar cells (PSCs). Blending the photoactive layer with a third component to produce a ternary system is considered a reliable approach to tune the nanomorphology, thereby improving the device performance. Herein, poly[(2,6‐(4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)benzo[1,2‐b:4,5‐b′]‐dithiophene)‐co‐(1,3‐di(5‐thiophen‐2‐yl)‐5,7‐bis(2‐ethylhexyl)benzo[1′,2′‐c:4,5‐c′]dithiophene‐4,8‐dione))] (PBDB‐T): 3,9‐bis(2‐methylene‐(3‐(1,1‐dicyanomethylene)‐indanone))‐5,5,11,11‐tetrakis(4‐hexylphenyl)‐dithieno[2,3‐d:2′,3′‐d′]‐s‐indaceno[1,2‐b:5,6‐b′]dithiophene) (ITIC) solar cells doped with a third small molecule are systematically investigated, namely, (5Z,5′Z)‐5,5′‐((7,7′‐(9,9‐dioctyl‐9H‐fluorene‐2,7‐diyl)bis(benzo[c]1,2,5]thiadiazole‐7,4‐diyl))‐bis(methanylyl‐idene))bis(3‐ethyl‐2‐thioxothiazolidin‐4‐one) (FBR). Owing to the wide optical bandgap of FBR, blending PBDB‐T:ITIC with FBR increases the device's light‐harvesting capability in the short wavelength range (400–550 nm), which improves the short circuit current. Differential scanning calorimetry and grazing incidence wide angle X‐ray scattering analyses reveal that the FBR exhibits impressive miscibility with ITIC, leading to the formation of ITIC:FBR alloys. Optimum performance is achieved with a PBDB‐T:ITIC:FBR (1:0.8:0.2) cell, which yields a PCE of 11.17%, demonstrating a 10% improvement relative to the PBDB‐T:ITIC binary cell. Crucially, the ternary solar cells also show improved device stability, which is attributed to the formation of ITIC:FBR alloys suppressing the crystallization of ITIC. This study provides deep insights into the performance‐ and stability‐related improvements available to PSCs devices that incorporate a third conjugated small molecule. </section>

A Simple-Structure Small-Molecule Acceptor Enables over 18% Efficiency Ternary Polymer Solar Cells with a Broad Composition Tolerance

Ternary Polymer Solar Cells with High Efficiency of 14.24% by Integrating Two Well‐Complementary Nonfullerene Acceptors

Two Compatible Nonfullerene Acceptors with Similar Structures As Alloy for Efficient Ternary Polymer Solar Cells

A Minimal Benzo[c][1,2,5]thiadiazole-Based Electron Acceptor As a Third Component Material for Ternary Polymer Solar Cells with Efficiencies Exceeding 16.0%

Ternary Polymer Solar Cells Based-on Two Polymer Donors with Similar HOMO Levels and an Organic Acceptor with Absorption Extending to 850 Nm

Ternary Organic Solar Cells with Efficiency >16.5% Based on Two Compatible Nonfullerene Acceptors.

Boosting Photovoltaic Performance of Ternary Organic Solar Cells by Integrating a Multi-Functional Guest Acceptor

A Trialkylsilylthienyl Chain-Substituted Small-Molecule Acceptor with Higher LUMO Level and Reduced Band Gap for Over 16% Efficiency Fullerene-Free Ternary Solar Cells

High-Performance Ternary Nonfullerene Polymer Solar Cells with Both Improved Photon Harvesting and Device Stability.

18% Efficiency of Ternary Organic Solar Cells Enabled by Integrating a Fused Perylene Diimide Guest Acceptor

Simultaneous Performance and Stability Improvement of Ternary Polymer Solar Cells Enabled by Modulating the Molecular Packing of Acceptors

Multiple Roles of a Non-fullerene Acceptor Contribute Synergistically for High-Efficiency Ternary Organic Photovoltaics

High‐Performance Ternary Organic Solar Cells Enabled by Integrating a 3d‐shaped Guest Acceptor Derived from Perylene Diimide

Ternary nonfullerene polymer solar cells with efficiency >13.7% by integrating the advantages of the materials and two binary cells

Small Molecule Ternary Solar Cell with Two Synergistic Electron Acceptors for Enhanced Photovoltaic Performance

Ternary Polymer Solar Cells Enabled Using Two Donor Polymers with Broad Absorption and Cascade LUMO Levels

Charge photogeneration and recombination in ternary polymer solar cells based on compatible acceptors

Efficient and Stable Ternary Organic Solar Cells Based on Two Planar Nonfullerene Acceptors with Tunable Crystallinity and Phase Miscibility.

Enhanced Photovoltaic Performances Via Ternary Blend Strategy Employing a Medium-Bandgap D-A Type Alternating Copolymer As the Single Donor

Ternary All-Polymer Solar Cells with 8.5% Power Conversion Efficiency and Excellent Thermal Stability.

Efficient ternary blend polymer solar cells with indene-C60 bisadduct as an electron-cascade acceptor