Abstract:CsPbIBr 2 perovskite has been considered as a promising candidate for the light-harvesting material of perovskite solar cells (PSCs) due to its acceptable band gap and high stability. Nevertheless, the efficiency of CsPbIBr 2 -based PSC still lags behind that of its homologs and is far away from the theoretical value. This can be attributed to the poor quality of CsPbIBr 2 perovskite film. Therefore, it is highly desirable to improve the quality of CsPbIBr 2 perovskite film for enhancing the photovoltaic performance of CsPbIBr 2 PSCs. In this work, cellulose acetate (CA) is used as a polymer additive that is introduced into CsPbIBr 2 precursor solution for improving the quality of CsPbIBr 2 perovskite film via controlling crystallization process. The interaction between the C=O group of CA and Pb 2+ in the precursor solution and the enhanced viscosity of precursor solution induced by CA addition reduce the crystallization rate of CsPbIBr 2 perovskite. As a result, a compact CsPbIBr 2 perovskite film with high crystallinity, large grain size, and low density of defect is prepared. The remarkably improved quality of CsPbIBr 2 perovskite film upon CA addition can be attributed to the relatively slow crystallization rate. The slow crystallization rate allows the perovskite film to have enough time to form perfect perovskite crystal structure with large-size crystal grain and low density of defects. Furthermore, the oxygen functional groups of CA can passivate the undercoordinated Pb 2+ , which effectively suppresses the defects and traps induced by Pb 2+ in CsPbIBr 2 perovskite film. The stability of CsPbIBr 2 perovskite film is also greatly improved by CA addition. The added CA does not participate into the CsPbIBr 2 perovskite crystal but distributes at the grain boundaries and, or, interfaces area and forms a moisture barrier around perovskite grains, which obviously enhances the stability of CsPbIBr 2 perovskite film in the ambient air. The carbon-based CsPbIBr 2 perovskite solar cells with a configuration of FTO/TiO 2 /perovskite film/ carbon are fabricated by using the carbon layer as both the hole-transport layer and the back electrode. Under the illumination of 100 mW/cm 2 , the PSC based on CA-CsPbIBr 2 perovskite film delivers a high conversion efficiency of 7.52%, which is increased by 40% compared with the efficiency of the device based on the pure CsPbIBr 2 perovskite film. In addition, the PSC based on CA-CsPbIBr 2 perovskite film shows a hysteresis index (HI) of 7%, while the device based on pure CsPbIBr 2 film displays a higher HI of 22%. This result demonstrates that the CA addition can effectively suppress the hysteresis effect of inorganic PSCs. The stability of the PSC based on CA-CsPbIBr 2 perovskite film is investigated by tracking the variation of the efficiency with time in the ambient condition. The fabricated PSCs without any encapsulation are stored in the air. The photovoltaic performance is measured once a day. The efficiency of the PSC based on CA-CsPbIBr 2 perovskite remains more than 90% of its initial value after being stored in the air for 800 h, showing an excellent long-term stability. Therefore, this work provides a facile and effective method of improving the quality of CsPbIBr 2 perovskite films, which is expected to be helpful in developing high-efficiency and stable carbon-based inorganic PSCs.

Cesium Acetate-Assisted Crystallization for High-Performance Inverted CsPbI3perovskite Solar Cells.

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Efficient and stable perovskite solar cells doped by cesium acetate

Tailoring Crystallization Dynamics of CsPbI3 for Scalable Production of Efficient Inorganic Perovskite Solar Cells

Crystallization Management of CsPbI2Br Perovskites by PbAc2-incorporated Twice Spin-Coating Process for Efficient and Stable CsPbI2Br Perovskite Solar Cells

Illumination Enhanced Crystallization and Defect Passivation for High Performance CsPbI3 Perovskite Solar Cells by Sacrificing Dye

Manipulating the Crystallization and Phase Transition for High-Performance CsPbI<sub>2</sub>Br Solar Cells

In Situ Dehydration Condensation of Self‐Assembled Molecules Enables Stabilization of CsPbI3 Perovskites for Efficient Photovoltaics

Facile Hydrogen‐Bonding Assisted Crystallization Modulation for Large‐area High‐quality CsPbI2Br Films and Efficient Solar Cells

21.15%‐Efficiency and Stable γ ‐CsPbI3 Perovskite Solar Cells Enabled by an Acyloin Ligand

The Molecular Additive N-Acetyl-L-Phenylalanine Delays the Crystallization and Suppresses the Phase Impurity for Achieving Triple-Cation Perovskite Solar Cells with Efficiency over 25.

Acetic Acid Assisted Crystallization Strategy for High Efficiency and Long-Term Stable Perovskite Solar Cell

Enhancing Quality of CsPbIBr2 Inorganic Perovskite Via Cellulose Acetate Addition for High-Performance Perovskite Solar Cells

Synchronous surface reconstruction and grain boundary healing toward efficient and stable inverted CsPbI3 perovskite solar cells

Application of Cesium on the Restriction of Precursor Crystallization for Highly Reproducible Perovskite Solar Cells Exceeding 20% Efficiency

Surface passivation engineering strategy to fully-inorganic cubic CsPbI 3 perovskites for high-performance solar cells

Mediator–Antisolvent Strategy to Stabilize All-Inorganic CsPbI3 for Perovskite Solar Cells with Efficiency Exceeding 16%

Zinc and Acetate Co-doping for Stable Carbon-Based CsPbIBr 2 Solar Cells with Efficiency over 10.6%

Erbium-doped CsPbI2.5Br0.5 with Enhanced Crystalline Quality and Improved Carrier Lifetime for Thermally Stable All-Inorganic Perovskite Solar Cells

Ambient Air Processed Inverted Inorganic Perovskite Solar Cells with over 21% Efficiency Enabled by Multifunctional Ethacridine Lactate

An Extraordinary Antisolvent Ethyl Cyanoformate for Achieving High Efficiency and Stability P3HT‐Based CsPbI3 Perovskite Solar Cells