Semi-analytical Model for Material Flow Behavior in Thick Plates Via Friction Stir Welding

Yuan, Ke,Yu, Haidong,Xu, Xun,Zheng, Bin

DOI: https://doi.org/10.1007/s00170-022-09341-7

2022-01-01

Abstract:The material flow in the weld by friction stir welding (FSW) is difficult to be visualized in real time due to the limitations of detection methods. In this paper, a semi-analytical velocity model is developed for characterizing the three-dimensional flow behavior of material in thick plates jointed by FSW. The welded region is divided into three parts, and the analytical models of flow velocities of material in various zones are derived according to the flow characteristics and slipping performance of material induced by tool and shoulder. The streamlines at different thickness of weld are calculated by the numerical solution of the proposed analytical model. The flow behavior in the thickness direction for two AA2024-T3 thick plates jointed by FSW is studied and compared with the experimental phenomena. The results show that the semi-analytical model may explain the material flow in the weld of thick plates caused by tool and pin simultaneously. The complex flow of material appears in the middle layer of weld caused by the spiral motion around the pin and the circulation motion in vertical direction. Some material far from the shoulder of tool fails to flow from the retreating side to the advancing side because it is not fully plasticized, which may lead to welding defects such as grooves and wormholes. This model may be used for determination of the weld process parameters by FSW for thick plates.