Abstract:In order to improve the energy output consistency of 3, 3′-diamino-4, 4′-azoxyfurazan (DAAF) in the new insensitive booster and the safety and efficiency in the preparation process, a continuous preparation system of DAAF from synthesis to spherical coating was designed and established in this paper, which combined ultrasonic micromixing reaction with microdroplet globular template. In the rapid micromixing stage, the microfluidic mixing technology with ultrasonic was used to synergistically strengthen the uniform and rapid mass transfer mixing reaction between raw materials to ensure the uniformity of DAAF particle nucleation-growth, and to prepare high-quality DAAF crystals with uniform structure and morphology and concentrated particle size distribution. In the microdroplet globular template stage, the microfluidic droplet technology was used to form a droplet globular template with uniform size under the shear action of the continuous phase of the dispersed phase solution containing DAAF particles and binder. The size of the droplet template was controlled by adjusting the flow rate ratio between the continuous phase and the dispersed phase. In the droplet globular template, with the diffusion of the solvent in the dispersed phase droplets, the binder precipitates to coat the DAAF into a ball, forming a DAAF microsphere with high sphericity, narrow particle size distribution and good monodispersity. The problem of discontinuity and DAAF particle suspension in the process was solved, and the coating theory under this process was studied. DAAF was coated with different binder formulations of fluororubber (F2604), nitrocellulose (NC) and NC/glycidyl azide polymer (GAP), and the process verification and evaluation of the system were carried out. The balling effects of large, medium and small droplet templates under different binder formulations were studied. The scanning electron microscope (SEM) results show that the three droplet templates under the three binder formulations exhibit good balling effect and narrow particle size distribution. The DAAF microspheres were characterized by powder X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermo-gravimetric (TG) and sensitivity analyzer. The results showed that the crystal structure of DAAF did not change during the process, and the prepared DAAF microspheres had lower decomposition temperature and lower mechanical sensitivity than raw DAAF. The results of detonation parameters show that the coating of DAAF by using the above three binder formulations will not greatly reduce the energy output of DAAF, and has comparable detonation performance to raw DAAF. This study proves an efficient and safe continuous system from synthesis to spherical coating modification of explosives, which provides a new way for the continuous, safe and efficient preparation of spherical explosives.

Synthesis and Characterization of DAAF by Microfluidic Technology

Preparation of Nano-DAAF Explosive with Improved Initiation Sensitivity

Process and Performance of DAAF Microspheres Prepared by Continuous Integration from Synthesis to Spherical Coating Based on Microfluidic System

Formation of flake-like DAAF crystals with tunable size realized on a microfluidic platform for binder-free initiator explosives

Microfluidic preparation of surfactant-free ultrafine DAAF with tunable particle size for insensitive initiator explosives

Initial Decomposition Step and Bimolecular Hydrogen Transfer of 3, 3′-Diamino-4, 4′-Azoxyfurazan under High Pressure and High Temperature

Optimization and Thermal Risk Analysis of 3,4-bis(4-Aminofurazano-3-yl) Furoxan Synthesis Process Based on Reaction Mechanism

AB INITIO STUDY OF THE MOLECULAR STRUCTURE AND THERMAL CIS–TRANS ISOMERIZATION OF 3,3′-DIAMINO-4,4′-AZOFURAZAN AND 3,3′-DIAMINO-4,4′-AZOXYFURAZAN

Preparation of spherical DAOAF with micro-nano structure by emulsion method: To improve short-pulse initiation performance

Continuous-flow and safe synthesis of 3-amino-4-amidoximinofurazan

Study of the Effect of Composite Energetic Binder on the Performance of DAAF at Ambient and Elevated Temperatures

Aqueous One-Step Modulation for Synthesizing Monodispersed ZIF-8 Nanocrystals for Mixed-Matrix Membrane

Pressure-Dependent Luminescence and Absorption in 3,3′-Diamino-4,4′-azoxyfurazan: Secondary Bonding Interaction in Molecular Crystals

Study on trifluoromethanesulfonic acid-promoted synthesis of daidzein: process optimization and reaction mechanism

Valorization of Chitin Biomass into N-containing Chemical 3-Acetamido-5-acetylfuran Catalyzed by Simple Lewis Acid

Synthesis and Characterization of 3,4-Bis[3(2-azidoethoxy)furazan-4-yl]furoxan (DAeTF): A Novel Low-Melting Insensitive Energetic Material

The Formation of D-Allulose 3-Epimerase Hybrid Nanoflowers and Co-Immobilization on Resins for Improved Enzyme Activity, Stability, and Processability

Synthesis Mechanism and Material Characterization of C4AF Obtained by the Self-propagating Combustion Reaction Method

Dehumidification performance of aluminum fumarate metal organic framework and its composite

Instant Synthesis of 2,5‐Diformylfuran from Concentrated 5‐Hydroxymethylfurfural without Catalyst and Organic Solvent

The facile synthesis, properties and application of ZAO nanomaterials