Abstract:In this study, a mixed-acid-assisted system utilizing a combination of a weak acid (citric acid, CA) and strong acid (H2SO4, SA) under hydrothermal reaction conditions was proposed for simultaneous preparation and modification (carboxylation) of cellulose nanocrystals (CNCs). Bleached bamboo pulp was used as the cellulose source, and the optimized reaction conditions were further used to produce carboxylated CNCs (cCNCs) from microcrystalline cellulose and Whatman 1 filter paper. Different concentrations of CA and SA (namely, 40 wt % CA (optimized concentration) and 5, 10, 20, and 30 wt % SA) were used for the hydrolytic processing of raw cellulosic material under hydrothermal conditions. The effect of various concentrations of CA and SA on the yield, carboxylate content, microstructure, crystallinity, thermal, and rheological characteristics of cCNCs were methodically investigated and contrasted. The optimized hydrothermal reaction conditions performed for 4 h at 100 degrees C using a mixture of 40 wt % CA and only 20 wt % SA yielded needle-shaped cCNCs with a yield higher than 70%. The carboxyl functionalization of CNCs was affirmed through Fourier transform infrared spectroscopy and conductometric titrimetric method. The results revealed the carboxylate content of 1.18 mmol/g corresponding to an average degree of oxidation of similar to 0.20. The length of nanocrystals lies in the range of 280-420 nm with diameter ranging from 10 to 20 nm, as was perceived through microstructural analytical tools like field emission scanning electron microscopy, transmission electron microscopy, and atomic force microscopy. Dynamic light scattering analysis gives an average size of similar to 200 nm. The visual inspection revealed high colloidal stability of cCNCs dispersions, which was further supported through its appreciable Zeta potential value of ca. -49.5 mV. Further, the rheological characterizations revealed typical features reminiscent of critical gels showing elastic behavior of cCNCs. Nanocomposite films of hydroxypropyl methylcellulose (HPMC) with different loadings of cCNCs were fabricated using a simple solvent casting method. The incorporation of very small amounts of cCNCs (0.1 wt %) in HPMC resulted in similar to 58% increment in tensile strength, similar to 10% increment in modulus, and similar to 82% increment in elongation. Moreover, the composite films exhibited high transparency and appreciable water barrier properties that allow their potential application as barrier and transparent films for various applications.

Efficient Preparation of Cellulose Nanocrystals with a High Yield Through Simultaneous Acidolysis with a Heat-Moisture Treatment

Highly Efficient Preparation of Functional and Thermostable Cellulose Nanocrystals Via H2SO4 Intensified Acetic Acid Hydrolysis.

Preparation of nanocellulose in high yield via chemi-mechanical synergy

Preparation of high-aspect-ratio cellulose nanocrystals by solvothermal synthesis followed by mechanical exfoliation

Preparation of Cellulose Nanocrystals by Synergistic Action of Ionic Liquid and Recyclable Solid Acid under Mild Conditions

Preparation of cellulose nanocrystals by ultrasonication-assisted phosphotungstic acid method: An effective method of high yield and friendly environment

A New Approach for the Preparation of Cellulose Nanocrystals from Bamboo Pulp Through Extremely Low Acid Hydrolysis

Highly Efficient and Sustainable Preparation of Carboxylic and Thermostable Cellulose Nanocrystals Via FeCl3-Catalyzed Innocuous Citric Acid Hydrolysis

Effect of Microfluidizing Cycles after Citric Acid Hydrolysis on the Production Yield and Aspect Ratio of Cellulose Nanocrystals

Preparation of Spherical Cellulose Nanocrystals from Microcrystalline Cellulose by Mixed Acid Hydrolysis with Different Pretreatment Routes

Sustainable preparation of bifunctional cellulose nanocrystals via mixed H2SO4/formic acid hydrolysis

Comprehensive utilization strategy of cellulose in a facile, controllable, high-yield preparation process of cellulose nanocrystals using aqueous tetrabutylphosphonium hydroxide

Mixed-Acid-Assisted Hydrothermal Process for Simultaneous Preparation and Carboxylation of Needle-Shaped Cellulose Nanocrystals

Highly Efficient and Sustainable Preparation of Carboxylic and Thermostable Cellulose Nanocrystals via FeCl 3 -Catalyzed Innocuous Citric Acid Hydrolysis

Sustainable Preparation and Characterization of Thermally Stable and Functional Cellulose Nanocrystals and Nanofibrils Via Formic Acid Hydrolysis

High yielding, one-step mechano-enzymatic hydrolysis of cellulose to cellulose nanocrystals without bulk solvent

Tailored and Integrated Production of Carboxylated Cellulose Nanocrystals (cnc) with Nanofibrils (cnf) Through Maleic Acid Hydrolysis

The Simultaneous Production of Two Distinct Types of Cellulose Nanocrystals

High-yield and scalable cellulose nanomesh preparation via dilute acid vapor and enzymatic hydrolysis-mediated nanofabrication

Preliminary Investigations of the Mechanisms Involved in the Ultrasonication-Assisted Production of Carboxylic Cellulose Nanocrystals with Different Structural Carboxylic Acids

Cellulose Nanocrystal Preparation via Rapid Hydrolysis of Wood Cellulose Fibers Using Recyclable Molten Ferric Chloride Hexahydrate