Doped Micron Silicon and Mxene Based Composite Anodes for High-Performance Li-Ion Batteries
Rohit Choudhury,Narendra Kurra,Praveen Meduri
DOI: https://doi.org/10.1149/ma2023-022426mtgabs
2023-12-22
ECS Meeting Abstracts
Abstract:With the world's energy needs constantly increasing, renewable energy sources must be technologically advanced and integrated with energy storage devices to ensure their uninterrupted operation. In recent decades, researchers have devoted substantial efforts to improve the energy density of lithium-ion batteries (LIBs) [1]. While graphite remains the commercial anode in LIBs, it’s very low theoretical capacity (372 mAh g -1 ) restricts its use in high-energy applications. Silicon (Si), owing to its high theoretical capacity of 4200 mAh g -1 , natural abundance, and appropriate Li uptake potential (0.4 V vs Li/Li + ), is a promising anode material [2]. However, its massive volume expansion restricts its practical use. In this study, micron-sized Si particles are combined with graphite. Micron Si is less expensive, and the synthesis process is simpler. The well-ground mixture (Si-G) is mixed with a polymer solution to generate pyrolytic carbon (upon carbonising). This aids in the buffering of mechanical stresses caused by Si volume expansion. Furthermore, direct exposure of Si to the electrolyte is avoided, stabilising the solid electrolyte interphase (SEI). The addition of a dopant improves the intrinsic conductivity of the material, resulting in increased capacity by providing electron and Li-ion transport channels. To further enhance the composite's performance, synthesized Mxene is added to promote the charge transport between micron Si. Using various techniques such as SEM-EDAX, XRD, Raman, and XPS spectroscopy, the composite's morphology and structure is studied which reveals uniformly distributed Si, C, and Mxene sheets that retain the sheet architecture. As an anode, the composite exhibits outstanding electrochemical performance which was evident by its impressive lithium storage specific capacity of 2003 mAh g -1 (based on weight of Si) even after long term cycling (at 1C rate). Additionally, the composite demonstrates superior rate performance with a specific capacity of 2439 mAh g -1 at 10 C rate, highlighting its potential for high-power applications. Moreover, the electrode displayed a low charge transfer impedance and fast electron transport, which improved the electrochemical performance. The reason for this improved performance is the unique structure consisting of Mxene and doping, which significantly increased the Li ion diffusion and the active sites. Also, low-cost micron Si is used which has a high tap density. Thus, this work provides an approach to develop high-capacity LIBs based on silicon. Keywords: Lithium-ion battery, micron silicon anode, Mxene, doping. References Liu, L. Kang, J. Hu, E. Jung, J. Zhang, S.C. Jun, Y. Yamauchi, Unlocking the Potential of Oxygen-Deficient Copper-Doped Co 3 O 4 Nanocrystals Confined in Carbon as an Advanced Electrode for Flexible Solid-State Supercapacitors, ACS Energy Lett. 6 (2021) 3011–3019. https://doi.org/10.1021/acsenergylett.1c01373. Zhou, Y. Liu, C. Du, Y. Ren, T. Mu, P. Zuo, G. Yin, Y. Ma, X. Cheng, Y. Gao, Polyaniline-encapsulated silicon on three-dimensional carbon nanotubes foam with enhanced electrochemical performance for lithium-ion batteries, Journal of Power Sources. 381 (2018) 156–163. https://doi.org/10.1016/j.jpowsour.2018.02.009.