Abstract:A new type of nano-SnFe2O4 with stable lattice-oxygen and abundant surface defects anchored on ultra-thin graphene-like porous carbon networks () is prepared for the first time by an interesting freezing crystallization salt template method. The functional composite has excellent rate performance and long-term cycle stability for lithium-ion battery (LIB) anodes due to the stable structure, improved conductivity, and shortened migrating distance for lithium-ions, which are derived from the higher lattice-oxygen of SnFe2O4, abundant porous carbon networks and surface defects, and smaller nanoparticles. Under the ultra-high current density of 10, 15, and 20 A g–1 cycling for 1000 times, the can provide high reversible capacities of 522.2, 362.5, and 361.1 mAh g–1, respectively. The lithium-ion storage mechanism of the composite was systematically studied for the first time by in situ X-ray diffraction (XRD), ex situ XRD and scanning electron microscopy (SEM), and density functional theory (DFT) calculations. The results indicate that the existence of Li2O and metallic Fe during the lithiation/delithiation process is a key reason for reducing the initial lithium-ion storage reversibility but increasing the rate performance and capacity stability in the subsequent cycles. DFT calculations show that lithium-ions are more easily adsorbed on the (111) crystal plane with a much lower adsorption energy of −7.61 eV than other planes, and the Fe element is the main acceptor of electrons. Moreover, the kinetics investigation indicates that the lithium-ion intercalation and deintercalation in are mainly controlled by the pseudocapacitance behavior, which is favorable to enhancing the rate performance. The research provides a new strategy for designing LIB electrode materials with a stable structure and outstanding lithium-ion storage performance.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c00321.SEM images of the prepared samples at different magnifications (Figure S1); SEM images and XRD of (Figure S2); SEM images of the precursor of the samples calcined at 600 °C before washing (Figure S3); TEM images of carbon layers for the samples (Figure S4); TEM images and elemental mapping of (Figure S5); the XRD patterns and SEM morphology of the precursor at different annealing temperatures (Figures S6 and S7); XPS survey spectra of the samples (Figure S8); XPS spectra of Sn 3d, C 1s, and Fe 2p of SFO, , , and (Figures S9–S11); Raman spectra and the enlarged part of the wave number between 800 and 1000 cm–1 (Figure S12); UV–vis spectra of , , and (Figure S13); BET surface area and the pore size distribution profile of composites (Figure S14); the CV curves at 0.1 mV s–1, the charge–discharge curves, and the CV curves at different scan rates of SFO, , , and (Figures S15–S17); the pseudocapacitance contribution at different CV scan rates of the samples (Figure S18–S24); characterization of anodes cycled at the current density of 6A g–1 for and (Figure S25 for SEM and TEM images; Figure S26 for the cross-sectional SEM images); the initial cell structure of (a) and (b) (Figure S27); the PDOS diagram of s, p, and d atomic orbitals and the total contribution of (111) surface atoms of SnFe2O4 before and after lithiation (Figures S28 and S29); the detailed amount of the reagents used to prepare each sample (Table S1); the XRD peaks' intensity ratio of the obtained samples (Table S2); the integral area values of simulated O 1s peaks at different states (Table S3); the integral area values of D and G peaks of composites (Table S4); and the DFT calculation results of each crystal surface energy before and after the adsorption of lithium-ions (Table S5) (PDF)This article has not yet been cited by other publications.

Optimizing SnO<sub>2−</sub><i><sub>x</sub></i>/Fe<sub>2</sub>O<sub>3</sub> Hetero‐Nanocrystals Toward Rapid and Highly Reversible Lithium Storage

Optimizing SnO 2− x /Fe 2 O 3 Hetero‐Nanocrystals Toward Rapid and Highly Reversible Lithium Storage

Crystalline SnO2 @ Amorphous TiO2 Core-Shell Nanostructures for High-Performance Lithium Ion Batteries

Sub-10 Nm SnO2/Fe3O4/graphene Nanosheets: Nanocatalysis to Improve Initial Coulombic Efficiency for Lithium Storage

Fully Reversible Lithium Storage of Tin Oxide Enabled by Self-Doping and Partial Amorphization.

Mo-Doped SnO2 Nanoparticles Embedded in Ultrathin Graphite Nanosheets as a High-Reversible-Capacity, Superior-Rate, and Long-Cycle-Life Anode Material for Lithium-Ion Batteries

Multi-yolk-shell SnO2/Co3Sn2@C Nanocubes with High Initial Coulombic Efficiency and Oxygen Reutilization for Lithium Storage

Nano Sn-SnO x Embedded in Multichannel Hollow Carbon Nanofibers: Microstructure, Reversible Lithium Storage Property and Mechanism

Insight into Reversible Conversion Reactions in SnO2‐Based Anodes for Lithium Storage: A Review

Tuning Anionic Redox Activity and Reversibility for a High‐Capacity Li‐Rich Mn‐Based Oxide Cathode via an Integrated Strategy

Enhanced Reaction Kinetics and Structure Integrity of Ni/SnO2 Nanocluster Toward High-Performance Lithium Storage.

Binding SnO2 Nanoparticles with MoS2 Nanosheets Toward Highly Reversible and Cycle‐Stable Lithium/Sodium Storage

Boosting Reversibility and Stability of Li Storage in SnO 2 –Mo Multilayers: Introduction of Interfacial Oxygen Redistribution

Reversible formation of metastable Sn-rich solid solution in SnO2-based anode for high-performance lithium storage

A Robust and Conductive Black Tin Oxide Nanostructure Makes Efficient Lithium-Ion Batteries Possible

Ultrafine SnO2 anchored in ordered mesoporous carbon framework for lithium storage with high capacity and rate capability

SnO2/Sn Particles Anchored in Moderately Exfoliated Graphite As the Anode of Lithium-Ion Battery

A nanoscale interlayer void design enabling high-performance SnO2-carbon anodes

Oxygen Vacancies Riched PrOx Polycrystalline Nanorods on Graphene Nanosheets as Advanced Oxygen Catalysts for Lithium‐oxygen Batteries

A Spinel Tin Ferrite with High Lattice-Oxygen Anchored on Graphene-like Porous Carbon Networks for Lithium-Ion Batteries with Super Cycle Stability and Ultra-fast Rate Performances

Unlocking the Origins of Highly Reversible Lithium Storage and Stable Cycling in a Spinel High‐Entropy Oxide Anode for Lithium‐Ion Batteries