Abstract:Two kinds of crystalline/amorphous nanolaminates (C/ANLs), i.e., Ag/Cu-Zr and Mo/Cu-Zr, with a wide range of modulation ratios (thickness ratio of the amorphous layer to the crystalline layer) from 0.1 up to 9.0 were, respectively, prepared using magnetron sputtering. The hardness and the strain rate sensitivity m were measured for comparison through nanoindentation testing. The mechanical properties displayed a strong -dependence, which was tuned by the crystalline phases. With the increase of , the hardness increased in the Ag/Cu-Zr nanolaminates while it decreased in the Mo/Cu-Zr ones. However, the two C/ANLs showed similar variations in m that was reduced gradually from positive values at small to negative values at large . Microstructural examination demonstrated that the amorphous Cu-Zr layers in both the C/ANLs showed a deformation-induced crystallization (DIC) phenomenon within the nanoindentation deformation zone. The DIC was highly dependent on and became more intense in the Mo/Cu-Zr than in the Ag/Cu-Zr C/ANLs. The - and constituent-dependent DIC behaviors were rationalized in light of the stress field applied on the amorphous layers that is sensitive to both the amorphous layer thickness and the crystalline constituents. This DIC-induced negative m in amorphous layers competed with the positive m in crystalline layers, leading to a negative-to-positive change in m on reducing . The underlying deformation mechanism was revealed to be the cooperation between dislocation activities in the crystalline layers and shear transformation zone motions in the amorphous layers. Furthermore, a modified mechanistic model was utilized to quantitatively describe the -dependent hardness at different crystalline constituents.

The Correlation Between Structural Characteristics and Plasticity Mediated by Shear Transformation Zone Size in Amorphous Alloys

Clarification on Shear Transformation Zone Size and Its Correlation with Plasticity for Zr-based Bulk Metallic Glass in Different Structural States

Correlation between Microscopically Structural Inhomogeneity and the Plasticity in Amorphous Alloy

Plastic Deformation Behaviors of Amorphous-Cu50zr50/crystalline-cu Nanolaminated Structures by Molecular Dynamics Simulations

An atomistic study of plastic deformation of SmCo 5 by amorphous shear bands

Size- and constituent-dependent deformation mechanisms and strain rate sensitivity in nanolaminated crystalline Cu/amorphous Cu–Zr films

The Nano- And Mesoscopic Cooperative Collective Mechanisms Of Inhomogenous Elastic-Plastic Transitions In Polycrystalline Tini Shape Memory Alloys

Amorphous shear bands in crystalline materials as drivers of plasticity

Hardening and toughening effects of intermediate nanosized structures in a confined amorphous alloy film

Shear-induced amorphization in nanocrystalline NiTi micropillars under large plastic deformation

Elemental partitioning-mediated crystalline-to-amorphous phase transformation under quasi-static deformation

Probing The Size- And Constituent-Mediated Mechanical Properties And Deformation Behavior In Crystalline/Amorphous Nanolaminates

Amorphous complexions alter the tensile failure of nanocrystalline Cu-Zr alloys

Constituent Constraining Effects on the Microstructural Evolution, Ductility, and Fracture Mode of Crystalline/amorphous Nanolaminates

Plastic Deformation Behaviours of CuZr Amorphous/crystalline Nanolaminate: a Molecular Dynamics Study

Plastic Deformation Mechanisms and Size Effect of Cu50Zr50/Cu Amorphous/crystalline Nanolaminate: A Molecular Dynamics Study

Data-Driven Insights into the Structural Essence of Plasticity in High-Entropy Alloys

Effect of Loading Rate on Creep Behavior and Shear Transformation Zone in Amorphous Alloy Thin Films, and Its Correlation with Deformation Mode Transition

Deformation in amorphous-crystalline nanolaminates -- an effective-temperature theory and interaction between defects

Substantially enhanced homogeneous plastic flow in hierarchically nanodomained amorphous alloys