Abstract:Densely deployed light emitting diodes (LEDs) typically lead to high spatial correlation in multiple-input multiple-output (MIMO) visible light communication (VLC) systems. Although precoding can effectively alleviate the spatial correlation issue, most existing precoding algorithms require a dedicated baseband chain for each LED, leading to high energy consumption and hardware complexity when a large number of LEDs are used. In this paper, a successive interference cancellation (SIC)-based precoding scheme with sub-connected architecture (SIC-SA) is proposed. In the considered model, each baseband chain is connected to an LED sub-array containing multiple LEDs to reduce the complexity. Since, in this case, SIC-based precoding can only determine the signal of each baseband chain for an LED sub-array, while its target is to mitigate the spatial correlation between individual LEDs, the electrical/optical power of each LED must also be jointly optimized to accomplish the target. This joint SIC-based precoding, power allocation, and direct current offset design problem is formulated as an achievable sum rate maximization problem under dimming control and electrical power constraints. A two-step iterative algorithm is proposed to solve this problem. In the first step, the SIC-based precoding is designed to alleviate the multi-user interference. In the second step, the power allocation of LEDs is optimized by matrix decomposition and convex optimization, and a closed-form solution of DC offset is derived. Furthermore, considering the dynamic scenarios, a SIC-based precoding scheme with dynamic sub-connected architecture (SIC-DSA) is proposed, in which a switch network is used to adaptively adjust the LED sub-array structure based on the channel state information. Simulation results show that the proposed SIC-SA and SIC-DSA respectively achieve 0.1340 bps/Hz/W and 0.1305 bps/Hz/W energy efficiency gains over the zero-forcing precoding scheme with SA, when the signal-to-noise ratio is 30 dB.

Joint Illumination and Communication Optimization in Indoor VLC for IoT Applications

LED Half-Power Angle Optimization for Ultra-Dense Indoor Visible Light Communication Network Deployment

Joint Link Scheduling and Brightness Control for Greening VLC-based Indoor Access Networks

VICO: A Framework for Configuring Indoor Visible Light Communication Networks

Indoor Visible Light Communication Scheduling for IOT Scenarios with Short Blocklength

Power and rate optimization for visible light communication system with lighting constraints

Power Optimization In Hybrid Visible Light Communication For Indoor Applications

Lamp location optimization for achievable rate maximization in visible light communication

Li-Fi: Light Fidelity-A Survey

Hybrid Visible Light Communication Power Optimisation in Indoor Environment

Joint SIC-Based Precoding and Sub-Connected Architecture Design for MIMO VLC Systems

Video Streaming in the Multiuser Indoor Visible Light Downlink.

Prototyping Visible Light Communication for the Internet of Things Using OpenVLC

SmartVLC: Co-Designing Smart Lighting and Communication for Visible Light Networks

Low-Cost Optical Camera Communications for IoT

Low-Latency Network Slicing for VLC-Based Industrial Internet of Things: Superframe Duration Minimization and Delay Violation Probability Analysis

Design and Demonstration of an Indoor Visible Light Communication Network with Dynamic User Access and Resource Allocation.

Low-Latency Network Slicing for VLC-Based Industrial Internet of Things: Superframe Duration Minimization and Delay Violation Probabilty Analysis

Joint Resource Management for Intelligent Reflecting Surface–Aided Visible Light Communications

Multi-User Sum-Rate Optimization for Visible Light Communications with Lighting Constraints

Multi-Element VLC Networks: LED Assignment, Power Control, and Optimum Combining