Abstract:Alternating and random conjugated copolymers with a siloxane-terminated side chain for a repeating unit based on 5,6-difluoro[2,1,3] benzothiadiazole (FBT) and quarterthiophene (4T) were synthesized, among which side-chain random copolymers PFBT4T-C5Si-50% and PFBT4T-C5Si-25% with low contents of 50% and 25% siloxane-terminated side chains, respectively, in conjunction with alkyl side chains were found to be more suitable for optoelectronic applications due to good film-forming in solution processing. Grazing incidence X-ray diffraction (GIXD) indicated that the siloxane-terminated side chain could induce PFBT4T-C5Si-50% and PFBT4T-C5Si-25% with face-on orientations, giving high 3-D hole transport in neat films as supported by a high hole mobility up to 2.46 cm(2) V-1 s(-1) in field-effect transistors and an SCLC hole mobility up to 5.9-10(-2) cm(2) V-1 s(-1) in hole-only devices. Fast SCLC hole and electron transports were seen for their bulk-heterojunction (BHJ) blend films with PC71BM as the acceptor, due to the retention of a polymer face-on orientation. The BHJ blend film of PFBT4T-C5Si-25% showed lower film surface roughness, more balanced hole and electron transport, and relatively smaller phase separation when compared with PFBT4T-C5Si-50%, as evidenced by atomic force microscopy (AFM), transmission electron microscopy (TEM), SCLC, and resonant soft X-ray scattering (RSoXS) measurements. The PFBT4T-C5Si-25%-based PSCs with 270, 420, and 600 nm thick active layers exhibited outstanding power conversion efficiencies (PCEs) of 10.39%, 11.09%, and 10.15%, respectively, readily offering a high thickness tolerance to achieve an unprecedented wide active layer processing window for PCE > 10%. This is also the first PCE of more than 10% achieved by an active layer of a 600 nm thickness level in PSCs. Another notable feature is very high fill factors of more than 74% and 71% being achieved for very thick active layers of 420 and 600 nm, respectively. The results suggest that side-chain engineering through the incorporation of a partial siloxane-terminated side chain is a unique handle to afford new photovoltaic polymers with enhanced vertical carrier transport towards application in roll-to-roll processing of PSCs.

Fine-tuning of Siloxane Pendant Distance for Achieving Highly Efficient Eco-Friendly Nonfullerene Solar Cells.

Siloxane-Terminated Side Chain Engineering of Acceptor Polymers Leading to over 7% Power Conversion Efficiencies in All-Polymer Solar Cells.

Dramatically Different Photovoltaic Effect Induced by Siloxane-Terminated Combinatory Side Chain in Polymer Solar Cells

Synthesis and photovoltaic performance of a non-fullerene acceptor comprising siloxane-terminated alkoxyl side chain

Significance of Siloxane Functionalized Side-Chain π-Conjugated Polymer Donor: Optimization of Active Layer Morphology Toward the Stable All-Polymer Solar Cells

Improved Average Figure‐of‐Merit of High‐Efficiency Nonfullerene Solar Cells Via Minor Combinatory Side Chain Approach

Random Terpolymer Based on Simple Siloxane-functionalized Thiophene Unit Enabling High-performance Non-fullerene Organic Solar Cells

Introduction of Siloxane-Terminated Side Chains into Semiconducting Polymers to Tune Phase Separation with Nonfullerene Acceptor for Polymer Solar Cells

Impact of the Siloxane-Terminated Side Chain on Photovoltaic Performances of the Dithienylbenzodithiophene-Difluorobenzotriazole-Based Wide Band Gap Polymer Donor in Non-Fullerene Polymer Solar Cells

Optimizing the Alkyl Side-Chain Design of a Wide Band-Gap Polymer Donor for Attaining Nonfullerene Organic Solar Cells with High Efficiency Using a Nonhalogenated Solvent

Low band gap conjugated polymers combining siloxane-terminated side chains and alkyl side chains: side-chain engineering achieving a large active layer processing window for PCE > 10% in polymer solar cells

Siloxane-functional small molecule acceptor for high-performance organic solar cells with 16.6% efficiency

Delicately Controlled Polymer Orientation for High-Performance Non-Fullerene Solar Cells with Halogen-Free Solvent Processing.

Subtle Molecular Tailoring Induces Significant Morphology Optimization Enabling over 16% Efficiency Organic Solar Cells with Efficient Charge Generation.

Polymer Donor with a Simple Skeleton and Minor Siloxane Decoration Enables 19% Efficiency of Organic Solar Cells.

An Efficient Tin‐Free Route to Small Molecules Based on Silole‐Modified Pentathiophenes for Solution‐Processed Organic Solar Cells

Non-fullerene acceptors with branched side chains and improved molecular packing to exceed 18% efficiency in organic solar cells

Ester side chains engineered quinoxaline based D-A copolymers for high-efficiency all-polymer solar cells

Regulating phase separation and molecular stacking by introducing siloxane to small-molecule donors enables high efficiency all-small-molecule organic solar cells

Manipulation of the spacing between the donor and acceptor by gradual side-chain modification to reduce energy loss of the organic solar cells

Over 18% Binary Organic Solar Cells Enabled by Isomerization of Non-Fullerene Acceptors with Alkylthiophene Side Chains