Abstract:Fe3O4 nanoparticles were synthesized by an eco‐friendly process and were used as adsorbents to remove methylene blue from aqueous solutions. The effects of pH, adsorbent dose, kinetics, isotherm, and thermodynamics parameters were studied. The adsorption systems were found to be compatible with the Langmuir isotherm model and the pseudo‐second‐order kinetic model. The magnetic properties of the adsorbents allow them to be separated from wastewater by simple separation. For the optimization of the adsorption variables, response surface methodology was successfully applied, and optimum values of these variables were determined with a quadratic model equation. Water coloring has the properties of resistance to mutagenic, toxic, aggressive, carcinogenic, destructive, strong light and unstable oxidation and air pollution and has serious effects on environmental systems and human health. Because of its severe toxicity, methylene blue (MB) can cause cancer, mutagenesis, and teratogenic consequences in people as well as enter the food chain. The main objective of this investigation is to study the modeling and the optimization parameters of MB adsorption using a low‐cost adsorbent Fe3O4. The parameters evaluated for adsorption are the adsorbent dosage, pH, contact time, and temperature using the response surface methodology. The principal variables affecting MB removal were pH (3–11), catalyst dosage (0.01–0.3 g), contact duration (10–180 min), and temperature (25–55 °C). To select an experimental domain, a preliminary study was performed first. The results showed that at pH 10, 1.4 g L−1 Fe3O4‐nanoparticles (NPs) had the highest removal efficiency of cationic dye MB (20 ppm) from aqueous solutions by batch adsorption technique. The pseudo‐second‐order (PSO) kinetic models and the Langmuir isotherm provided the best fit for the adoption of MB. The adsorption process was exothermic and spontaneous, according to thermodynamics studies. To determine the effect of the investigated variables and their interaction on the adsorption process, a Box–Behnken design was used. A second‐order polynomial equation was used to model the experimental results. The experimental findings were consistent with the suggested model as demonstrated by the high value of the determination coefficient. The performance of the model equation verified the experimental observation with just a slight divergence, and the values acquired from the experiment and model predictions were found to be in suitable agreement. According to the numerical optimization, 98.61 % is the optimal elimination efficiency for MB adsorption. These results suggest that an adsorption process utilizing Fe3O4 NPs is efficient in environmental remediation.

Recycled Α-Fe2o3 Nanoparticles Adsorbents from Nd-Fe-B Waste for Methylene Blue Adsorption

Novel magnetically separable anhydride-functionalized Fe3O4@SiO2@PEI-NTDA nanoparticles as effective adsorbents: synthesis, stability and recyclable adsorption performance for heavy metal ions

Adsorption of Methylene Blue by Halloysite/MnFe2O4 Nanocomposites

Turning waste avocado stones and montmorillonite into magnetite-supported nanocomposites for the depollution of methylene blue: adsorbent reusability and performance optimization

Enhanced adsorption of dye on magnetic Fe3O4 via HCl-assisted sonication pretreatment

A rapid method for the removal of Methyl blue dye from wastewater by magnetic nanoparticles Mn-ferrites

Removal of methylene blue from coloured effluents by adsorption onto SBA-15

Magnetically Recyclable Adsorption of Anionic Pollutants from Wastewater using 3,5-Diaminobenzoic Acid-Functionalized Magnetic Iron-Oxide-Nanoparticles

Synthesis and Characterization of Magnetic Fe3O4/Zeolite NaA Nanocomposite for the Adsorption Removal of Methylene Blue Potential in Wastewater Treatment

Design of Magnetic Nanoparticles with High Magnetic Separation Efficiencies and Durability for Cu2+ Adsorption

A Novel Magnetic Nano-Adsorbent Functionalized with Green Tea Extract and Magnesium Oxide to Remove Methylene Blue from Aqueous Solutions: Synthesis, Characterization, and Adsorption Behavior

A facile strategy for preparation of Fe3O4 magnetic nanoparticles using Cordia myxa leaf extract and investigating its adsorption activity in dye removal

Recycling of neodymium enhanced by functionalized magnetic ferrite

Novel Magnetic Fe3O4@C Nanoparticles As Adsorbents for Removal of Organic Dyes from Aqueous Solution.

Preparation of magnetite nanoparticles and their application in the removal of methylene blue dye from wastewater

Adsorption Behavior and Mechanism of Fe-Mn Binary Oxide Nanoparticles: Adsorption of Methylene Blue.

Enhanced Removal of Pb(II), Paracetamol and Rhodamine B from Aqueous Solutions Using Engineered Low‐Cost Tea Waste‐Based Magnetic Nanocomposite

Methylene Blue Adsorption by Fe3O4 Nanoparticles: An Optimization Study Using Response Surface Methodology

Effective Magnetic MOFs Adsorbent for the Removal of Bisphenol A, Tetracycline, Congo Red and Methylene Blue Pollutions

An efficient and magnetic adsorbent prepared in a dry process with enzymatic hydrolysis residues for wastewater treatment

ZnFe2O4 loaded on municipal waste-char: Outstanding adsorption and photocatalytic removal of contaminants