Abstract:<p>Wave environment equivalent to the full-scale nearshore storm was generated in a large wave flume, and the flow within wave boundary layer was measured using an acoustic Vectrino profiler. Analysis were made on various factors including the velocity profile, phase lead, boundary layer thickness, steady streaming, turbulence as well as bottom shear stress, and comparisons were made with existing studies using oscillatory flow tunnels. Results show that the phase lead in the boundary layer is less significant compared to previous tunnel experiments, generally smaller than 20°. Free surface and vertical velocity lead to a wave-induced Reynolds stress at the top of the boundary layer, resulting in a thinner boundary layer. Both wave-induced Reynolds stress and wave shape asymmetry contribute to the steady streaming, making its direction either onshore or offshore. Relationship of friction factor versus relative roughness generally agrees with the exponential expression in the literatures for rough turbulent boundary layer, however the value of friction factor is larger. It is stressed that the friction factor would be several times higher if the free stream velocity is calculated using linear wave theory, which is questionable as the measured waves in the large wave flume were shown to be highly nonlinear. To compensate the nonlinear effects which significantly contribute to the maximum bed shear stress, a velocity skewness factor based on second-order Stokes wave theory was introduced. For predicting the intra-wave bed shear stress, a time-varying friction factor was also constructed, which was proved to have acceptable precision compared with experimental data. These formulations have simple, explicit expressions that can be used in practical engineering applications, especially for the nonlinear waves under nearshore storm conditions.</p>

Numerical Study on the Turbulent Structure of Tsunami Bottom Boundary Layer Using the 2011 Tohoku Tsunami Waveform

Numerical Implementation of Wave Friction Factor into the 1D Tsunami Shallow Water Equation Model

A Numerical Study of Tsunami Wave Impact and Run-Up on Coastal Cliffs Using a CIP-based Model

Large-eddy Simulation of the Influence of a Wavy Lower Boundary on the Turbulence Kinetic Energy Budget Redistribution

Numerical Study of Turbidity Current over a Three-Dimensional Seafloor

Flow structure and bottom friction of the nonlinear turbulent boundary layer under stormy waves

Direct Numerical Simulation of A High-Froude-Number Turbulent Open-Channel Flow

Atmospheric boundary layer turbulence in the presence of swell: turbulent kinetic energy budget, Monin-Obukhov similarity theory and inertial dissipation method

Development of Depth-Limited Wave Boundary Layers over a Smooth Bottom

Numerical Investigation of the Water Surface-Waves Characteristics in Fully-Developed Wind-Driven Turbulent Flow

Wave Breaking on Turbulent Energy Budget in the Ocean Surface Mixed Layer

Sensitivities of Bottom Stress Estimation to Sediment Stratification in a Tidal Coastal Bottom Boundary Layer

Numerical Simulation of Tsunami Due to Submarine Landslide Using Extended Boussinesq Equations

Application of Stress Parameter from Liquefaction Analysis on the Landslide Induced Tsunami Simulation: A Case Study of the 2018 Palu Tsunami

Numerical simulation of submarine landslide tsunamis based on the smoothed particle hydrodynamics model

Turbulence characteristics in the bottom layer of a shallow tidal channel

2D FDM Simulation of Seismic Waves and Tsunamis Based on Improved Coupling Equations Under Gravity

Study tsunamis through approximate solution of damped geophysical Korteweg-de Vries equation

A numerical study on nearshore behavior of Japan Sea tsunamis using Green’s functions for Gaussian sources based on linear Boussinesq theory

Analysing the impact of bottom friction on shallow water waves over idealised bottom topographies

Measurements and Analysis on Flow Structures of Tidal Boundary Layer at the Bottom of Pearl River Estuary