Abstract:Based on the microscopic morphology and size distribution of the iron oxide scales measured in our erosion tests, 109 micro flaky particles were elaborately generated by MATLAB codes to ensure that the morphology and size distribution were basically consistent with the observations under the microscope. Furthermore, based on the nonlinear explicit dynamics software ABAQUS/explicit, the numerical simulations of the erosion mechanism of multi-particles on the blade substrate 1Cr12W1MoV in a high-parameter turbine were performed. Compared with the experimental data, the influence of the particle shape, particle size, impact velocity and particle roundness on the erosion rate was studied in detail. The results show that the shape of the particles has a great effect on the erosion rate. The impact angle corresponding to maximum erosion rate of the flaky particles is around 24°–30°. While the equivalent maximum impact angle is around 45°–60° for spherical particles. The effect of micro-cutting on erosion is greater than that of extrusion-forging for flaky particles. While the influence of micro-extrusion and forging on erosion is huger than that of micro-ploughing for spherical particles according to the morphologies results. In addition, the higher the roundness of the flaky particles, the lower the erosion rate. When the sphericity of the erodent particles entering the cascade passage reaches 0.5856 or more, the erosion rate will be greatly reduced, thereby significantly alleviating the erosion damage of the blade. The results of this paper will provide theoretical basis and technical support for further understanding of the erosion mechanism of typical blade materials in dust-laden turbines.

Experimental Investigation on the Water Droplet Erosion Characteristics of Blade Materials for Steam Turbine

Experimental Study on Water Erosion Resistance Characteristics to Steam Turbine Blade Material

Experimental Research on Water Droplet Erosion Resistance Characteristics of Turbine Blade Substrate and Strengthened Layers Materials

Experimental investigation on effect of surface strengthening process and roughness on water droplet erosion behavior in turbomachinery

Experimental Study on Water Droplet Erosion Resistance of Coatings (ni60 and WC-17Co) Sprayed by APS and HVOF

Water Drop Erosion on Turbine Blades: Numerical Framework and Applications

Analysis of Water Drop Erosion on Turbine Blades Based on a Nonlinear Liquid–solid Impact Model

Effect of Initial Surface Roughness on Water Erosion Resistance of Last Stage Blade Substrate of Steam Turbine

Numerical Investigation of the Erosion Behavior in Blades of Tidal Current Turbine

Liquid drop impact on solid surface with application to water drop erosion on turbine blades, Part II: Axisymmetric solution and erosion analysis

Liquid drop impact on solid surface with application to water drop erosion on turbine blades, Part I: Nonlinear wave model and solution of one-dimensional impact

Study on Water Erosion Simulation of Low Pressure Last Stage Blade of Nuclear Steam Turbine

Flow Field of Water Drops in A Blade Channel: Numerical Simulation of Water Drop Erosion on Turbine Blades

Investigation on the Erosion Characteristics of Martensitic Blade Steel Material 1cr12w1mov by Micro-Particle Swarm with High Velocity

Computational Fluid Dynamics Study of Erosion on 900 MW Steam Turbine ND-45 Blades Using 3D Scanning

Review on Research of Prediction and Prevention Methods of Water Droplet Erosion for Steam Turbine Blades

Study on Dynamic Response of Steam Turbine Blade with High Speed Water Droplet Impact

Dynamic response of wind turbine blade surface material under water droplet high velocity impact

Measurements of Droplet Sizes at Mid-hight of Stationary Turbine Blades and Analysis of the Critical Weber Number

Mechanisms of Steam Turbine Blade Particle Erosion and Crucial Parameters for Minimizing Blade Erosion

Effects of Coating Thickness, Test Temperature, and Coating Hardness on the Erosion Resistance of Steam Turbine Blades