Selective uptake of gaseous sulfur trioxide and mercury in ZnO-CuS composite at elevated temperatures from SO2-rich flue gas

Xingyu Pang,Wei Liu,Haomiao Xu,Qinyuan Hong,Peng Cui,Wenjun Huang,Zan Qu,Naiqiang Yan
DOI: https://doi.org/10.1016/j.cej.2021.132035
IF: 15.1
2022-01-01
Chemical Engineering Journal
Abstract:Gaseous SO3 and mercury in the SO2-rich gas have aroused the complexity of multi-pollutants formation and are difficult for disposal. We here proposed a dry-flue gas purification method to capture these two pollutants above the SO3 boiling points (>180 degrees C), cutting off the downstream transformation. The selective uptake of SO3 and Hg-0 at a high temperature from SO2-rich conditions is a challenge. The alkaline sorbent and chalcogen-based active sites were assembled to realize the induce-adsorption for SO3 and Hg-0, respectively. The results indicated that the ZnO-CuS composite showed the feasibility for SO3 and Hg-0 capture at elevated reaction temperatures. The composite with a molar ratio of 4:3 exhibited the highest performances for both Hg-0 and SO3 uptake. ZnO has an excellent SO3 selectivity in SO3/SO2 atmosphere with a high SO3 adsorption energy of -466.5 kJ/mol. CuS was the leading active site for Hg-0 adsorption using the surface S-n(2-) ions in Hg-0/SO3/SO2 simulated flue gas. Moreover, the surface sulfation process inevitably happened, but the presence of Hg-0 inhibited the reaction of SO3 with S2-, part of Hg-0 adsorbed to generate HgS and HgSO4. The induced adsorption surface drove gaseous mercury to enter the inner of the material, widening the temperature window for efficient capture for gaseous mercury and enhancing adsorption stability. Moreover, a pilot-scale experiment using CuS and ZnO materials indicated that higher SO3 and total gaseous mercury removal efficiencies were obtained with the help of dust removal devices.
What problem does this paper attempt to address?