Abstract:Key technologies for advanced nuclear systems encompass high temperature structural materials, fast neutron resistant core materials, and specific reactor and power conversion technologies (intermediate heat exchanger, turbo-machinery, high temperature electrolytic or thermo-chemical water splitting processes, etc.). The main requirements for the materials to be used in these reactor systems are dimensional stability under irradiation, whether under stress (irradiation creep or relaxation) or without stress (swelling, growth), an acceptable evolution under ageing of the mechanical properties (tensile strength, ductility, creep resistance, fracture toughness, resilience) and a good behavior in corrosive environments (reactor coolant or process fluid). Other criteria for the materials are their cost to fabricate and to assemble, and their composition could be optimized in order for instance to present low-activation (or rapid desactivation) features which facilitate maintenance and disposal. These requirements have to be met under normal operating conditions, as well as in incidental and accidental conditions. These challenging requirements imply that in most cases, the use of conventional nuclear materials is excluded, even after optimization and a new range of materials has to be developed and qualified for nuclear use. This paper gives a brief overview of various materials that are essential to establish advanced systems feasibility and performance for in pile and out of pile applications, such as ferritic/martensitic steels (9–12% Cr), nickel based alloys (Haynes 230, Inconel 617, etc.), oxide dispersion strengthened ferritic/martensitic steels, and ceramics (SiC, TiC, etc.). This article gives also an insight into the various natures of R&D needed on advanced materials, including fundamental research to investigate basic physical and chemical phenomena occurring in normal and accidental operating conditions, lab-scale tests to characterize candidate materials mechanical properties and corrosion resistance, as well as component mock-up tests on technology loops to validate potential applications while accounting for mechanical design rules and manufacturing processes. The selection, assessment and validation of materials necessitate a large number of experiments, involving rare and expensive facilities such as research reactors, hot laboratories or corrosion loops. The modelling and the codification of the behaviour of materials will always involve the use of such technological experiments, but it is of utmost importance to develop also a predictive material science. Finally, the paper stresses the benefit of prospects of multilateral collaboration to join skills and share efforts of R&D to achieve in the nuclear field breakthroughs on materials that have already been achieved over the past decades in other industry sectors (aeronautics, metallurgy, chemistry, etc.).

Editorial: Reactor Fuels, Materials and Systems Under Extreme Environments

Current state and prospect on the development of advanced nuclear fuel system materials: A review

A novel approach on designing ultrahigh burnup metallic TWR fuels: Upsetting the current technological limits

Focus on plasma-facing materials in nuclear fusion reactors

What is the Future for Nuclear Fission Technology? A Technical Opinion from the Guest Editors of VSI NFT Series and the Editor of the Journal Nuclear Engineering and Design

Development of advanced high heat flux and plasma-facing materials

Corrosion in the molten fluoride and chloride salts and materials development for nuclear applications

Resilient Design in Nuclear Energy: Critical Lessons from a Cross-Disciplinary Review of the Fukushima Dai-ichi Nuclear Accident

A Review of the Performance Analysis of Plate Type Fuel Elements in High-Flux Reactors

Grid-to-rod fretting in nuclear power reactors: Driving mechanisms, research methodologies and mitigation measures

Multistage Corrosion of Fuel Element Materials in Nuclear Reactors

Structural materials challenges for advanced reactor systems

ENGINEERED NANO-MATERIALS FOR ENERGY AND THEIR POTENTIAL IMPACT ON ACTUAL ENVIRONMENTAL ISSUES

Research Progress of Steels for Nuclear Reactor Pressure Vessels

Developing power plant materials using the life cycle lens

Overview of Reactor Systems and Operational Environments for Structural Materials in Gen-IV Fission Reactors

Advancing Methods for Fusion Neutronics: An Overview of Workflows and Nuclear Analysis Activities at UKAEA

Functional Materials for Fusion Nuclear Power Cores (A Technical Memorandum)

Long-Term Research & Design Strategies for Fusion Energy Materials

Structural materials issues for the next generation fission reactors

Research Progress on the Corrosive Environment Large-Scale Evolution for Nuclear Waste Container