Abstract:Adhesively bonded joints with T-shaped configurations are widely used in bonded components of engineering structures used in industries such as automotive, aircraft, and marine. In this paper, static strength and fatigue life of two T-joint configurations of flat and grooved types were evaluated. For this purpose, firstly, the effect of the specimen configuration of the bonded T-joints on the stress field has been calculated using the finite element method. For this purpose, a three-dimensional elastoplastic model is used for simulation. Then, static failure load of these joint types was examined under four loading rates of 1, 10, 50, and 100 mm/min. Also, fatigue tests were performed under maximum fatigue loads of 40%, 60% and 80% of average static failure loads. Results indicated that the average static failure load of grooved specimens was 37.3%, 26.5%, 14.4%, and 9.3% higher than that of the flat type T-joints under 1, 10, 50, and 100 mm/min loading rates, respectively. Moreover, fatigue life cycles of grooved T-joints were 40.2%, 25.3%, and 11.6% longer than that of the flat bonded specimens under 40%, 60%, and 80% maximum fatigue loads, respectively. It was also concluded that, under high fatigue loads, the groove effect can be ignored on improving the fatigue life.

An investigation on static and fatigue life evaluation of grooved adhesively bonded T-joints