Abstract:Turbulators, such as ribs, dimples, and pin-fins, play a vital role in the internal cooling efficiency of turbine blades. As a typical turbulator, various rib configurations using a uniform arrangement scheme have indicated high heat transfer enhancement but the friction loss is simultaneously subject to a great increase. In this work, a novel hierarchical arrangement scheme of ribs is developed aiming to improve the cooling efficiency. Adopting the uniform scheme as a baseline, the hierarchical scheme is implemented for six representative rib configurations (including transverse ribs, angled ribs, V-shaped ribs, inverted V-shaped ribs, M-shaped ribs, and inverted M-shaped ribs) and evaluated for its feasibility and generality. For different cooling designs, turbulent flow and heat transfer of the ribbed cooling channel are studied by three-dimensional numerical simulations based on the finite volume method with a constructed turbulence model. It is found that for all rib configurations, the hierarchical scheme can remarkably reduce the friction loss as desired, especially for the inverted V-shaped rib with a reduction of up to 50%. Due to the occurrence of flow separation, secondary flows offered by transverse ribs are characterized by a two-dimensional recirculation vortex behind the rib. For other rib configurations, secondary flows present a typical three-dimensional characteristic including the downwash flows along the inclined rib leg and the longitudinal vortices. The usage of the hierarchical scheme with small ribs strongly suppresses these secondary flows, which contributes to the significant decrease in form drag loss. Meanwhile, using the hierarchical scheme produces a slight heat transfer deterioration commonly, which is because the constrained secondary vortices weaken the turbulent mixing and convection heat transfer. Significantly, for the two W-shaped ribs, the limited secondary vortices but fully developed under the hierarchical scheme achieve a higher heat transfer enhancement. Finally, for all considered ribs, the hierarchical scheme can improve the overall performance factor of ( Nu / Nu 0 )/( f / f 0 ) 1/3 by more than 10%, and up to 21.15% for the V-shaped rib. Adjusting design variables, including the decreasing ratio of the rib size and the initial rib size, the hierarchical scheme still provides even higher performance enhancement.

Near-wall Turbulent Transport Mechanisms in a Micro-Ribbed Channel

Scale effect of micro ribs on the turbulent transport in an internal cooling channel

Heat Transfer and Pressure Loss of Turbulent Flow in Channels with Miniature Structured Ribs on One Wall

Aerothermal Dynamic Characteristics of Array Micro Ribs in Channel Flow

Experimental Study of Flow and Heat Transfer of High-performance ribs for Internal Cooling of Gas Turbine Blades

Numerical Study of Heat Transfer and Flow Structure over Channel Surfaces Featuring Miniature V Rib-Dimples with Various Configurations

Heat transfer enhancement of return channel by using rib turbulator for a new impingement cooling scheme

Experimental Study of Heat Transfer and Pressure Loss in Channels with Miniature V Rib-Dimple Hybrid Structure

Performance evaluation with turbulent flow and heat transfer characteristics in rectangular cooling channels with various novel hierarchical rib schemes

Numerical investigation of the flows and heat transfer characteristics of internal cooling channels with separated ribs in gas turbine blades

Turbulent Flow Characteristics and Heat Transfer Enhancement in a Square Channel with Various Crescent Ribs on One Wall

Numerical Analysis of Turbulence Characteristics in a Flat-Plate Flow with Riblets Control

Numerical Predictions on Fluid Flow and Heat Transfer in U-Shaped Channel with the Combination of Ribs, Dimples and Protrusions under Rotational Effects

Numerical Study on Flow and Heat Transfer in A Rectangular Channel with 45 Deg Rib Turbulators and Bleed Holes

Experimental Investigation on Cooling Performance and Heat Transfer Characteristics of the Ribbed Endwall with Upstream Leakage

Turbulent Flow Structure and Heat Transfer Mechanisms over Surface Vortex Structures of Micro V-shaped Ribs and Dimples

Heat Transfer Enhancement in Gas Turbine U-Shaped Channel with Rib Tabulators under Rotational Effect

A NUMERICAL STUDY OF HEAT TRANSFER AND FLOW STRUCTURE IN CHANNELS WITH MINIATURE V RIB-DIMPLE HYBRID STRUCTURE ON ONE WALL

Enhanced Heat Transfer in a Labyrinth Channels with Ribs of Different Shape

Fluid flow and heat transfer in a rectangular ribbed channel with a hierarchical design for turbine blade internal cooling

Investigation of heat transfer and fluid flow in fractal truncated ribbed channels for the internal cooling of turbine blades