Abstract:Previous works (Devaux et al., 1997; Cheng et al., 2017) have emphasized the effects of strain hardening and elasticity upon ductile rupture of metals under cyclic loading conditions. This work pursues the study and modelling of these two effects by distinct theoretical methods, each coupled with micromechanical finite element simulations of the behaviour of some "representative cell". For the effect of strain hardening, we employ Morin et al. (2017)'s approach, based on the theory of sequential limit-analysis (Yang, 1993; Leu, 2007; Leblond et al., 2018). This approach is applied to various types of hardening of the metallic matrix: isotropic, linear kinematic, nonlinear kinematic with one or two kinematic variables (Armstrong and Frederick, 2007) , and even a simplified version of Chaboche (1991)'s model accounting for complex cyclic effects. Numerical micromechanical simulations of a hollow sphere made of elastic–plastic materials obeying the various hardening laws considered, and subjected to cyclic loadings at high triaxiality, fully confirm the predictions of the model developed, provided elasticity is made negligible by using an artificially high value of Young's modulus. When a realistic value is employed, however, the agreement between theoretical predictions and numerical results is degraded, thus emphasizing again the importance of the effect of elasticity in cyclic ductile rupture. To deal with this effect we derive, apparently for the first time, an evolution equation of the porosity accounting for (compressible) elasticity. However, numerical micromechanical simulations reveal that simply using this new evolution law, while keeping all other aspects of the model unchanged, remains insufficient to get a good match of theoretical and numerical results. Such a match is achieved by introducing the ad hoc hypothesis that the yield criterion and flow rule derived from sequential analysis still apply in the presence of elasticity, but with some "effective porosity" slightly differing from the true one through some heuristic, adjustable factor.

Buckling Pattern Transition of Periodic Porous Elastomers Induced by Proportional Loading Conditions

Incremental behavior of granular soils: a strain response envelope perspective

Nonlocal Vibration and Biaxial Buckling of Double-Viscoelastic-fgm-nanoplate System with Viscoelastic Pasternak Medium in Between

Elastic Buckling of Functionally Graded Rings Under Hydrostatic Pressure

A novel buckling pattern in periodically porous elastomers with applications to elastic wave regulations

A novel algorithm for post-buckling analysis of periodic structures and its application

A homogenization model for multiple buckling response of axially compressed cellular cylindrical shells

Postbuckling Analysis and Its Application to Stretchable Electronics

A Simple Bounding Surface Elasto-Viscoplasticity Model for Marine Clays under Monotonic and Cyclic Loading

Hyperelastic Behaviors of Closed-Cell Porous Materials at a Wide Porosity Range

Pattern transformation induced waisted post-buckling of perforated cylindrical shells

The cross-sectional geometry regulated Poynting effect in ribbed silicone rubber tubes

Buckling And Surface Wrinkling Of An Elastic Graded Cylinder With Elastic Modulus Arbitrarily Varying Along Radial Direction

Cyclic behavior of ellipse and peanut-shaped perforated buckling-restrained braces

Bifurcation of Pressurized Functionally Graded Elastomeric Hollow Cylinders

Constitutive model for simulating the mechanical behaviour of rock under triaxial cyclic loading

Uniaxial and non-proportionally multiaxial ratcheting of SS304 stainless steel at room temperature: experiments and simulations

Controllable Buckling of an Elastic Disc with Actuation Strain

Prescribed pattern transformation in swelling gel tubes by elastic instability

Mechanical characteristics of a novel rotating star-rhombic auxetic structure with multi-plateau stages

Ductile rupture under cyclic loadings at high triaxiality: The influence of strain hardening and elasticity