Abstract:In response to the advantages of compactness and high efficiency of spiral elastic tube heat exchanger and its easy-to-vibrate characteristics, this study aims to further improve its heat transfer efficiency by utilizing fluid-induced vibration-enhanced heat transfer technology, so a design scheme of reverse baffle spiral tube heat exchanger (RB-STHE) is proposed to enhance the turbulence characteristics of the shell-side fluid by installing spiral baffles, thus promoting the vibration of the spiral tube. In this study, four new types of the RB-STHE (Model A, B, C, and D) were used as research objects, and the two-way fluid–structure coupling calculation method (using CFX and Transient Structure software) was adopted to systematically investigate the effect of fluid-induced spiral tube vibration on the comprehensive heat transfer coefficient (HTC) of the RB-STHE under different flow velocities and structure schemes, and based on the research data, the objective of no reduction in the comprehensive HTC and savings in the use of materials is taken as the goal, so as to put forward the improved Model C-1. The results show that: although the fluid-induced spiral tube vibration can effectively improve the HTC of the spiral tube, it also increases the pressure drop in the RB-STHE, and the larger the amplitude, the higher the degree of influence; among them, Model C is most affected by the spiral tube vibration, and its HTC and pressure drop are maximally enhanced by 6.33% and 5.85%, respectively. The change in the number of baffles has a significant effect on the comprehensive HTC of the RB-STHE. Compared to the Model D without a spiral baffle, the maximum improvement in the comprehensive HTC of Model C with one spiral baffle installed in the RB-STHE is 14%, while the Model A with four spiral baffles and the Model B with two spiral baffles have a maximum reduction in the comprehensive HTC of 20% and 3%, respectively. In addition, compared to Model C, the structure improved Model C-1 significantly reduces the size of the spiral baffle while effectively maintaining the comprehensive HTC of the RB-STHE, making the structure more reasonable, which provides a reference for heat exchanger design.

Improved tube structure and segmental baffle to enhance heat transfer performance of elastic tube bundle heat exchanger

Vibration and Heat Transfer Study on Elastic-Tube Heat Exchange with Curved Baffle

Study on Vibration and Heat Transfer Performances of a Modified Elastic Tube Bundle Heat Exchanger

Design Guidelines for Fluid-Elastic Instability of Tube Bundles Subjected to Two-Phase Cross Flow

Numerical investigation of the effect of the structure and number of spiral baffles on the vibration and heat transfer coefficient of spiral tubes within spiral tube heat exchangers

Vibration-Enhanced Heat Transfer of Double-Array Helical Elastic Tube Bundle Heat Exchanger

Numerical Analysis on Performances of Shell Side in Segmental Baffles, Helical Baffles and Novel Clamping Anti-Vibration Baffles with Square Twisted Tubes Shell and Tube Heat Exchangers

Numerical Simulation of Fluid-Elastic Instability in Heat Exchanger Tube Bundles

Experimental Investigation on Performance Comparison for Shell-and-tube Heat Exchangers with Different Baffles

Numerical Comparison of Thermohydraulic Performance and Fluid-Induced Vibrations for STHXs with Segmental, Helical, and Novel Clamping Antivibration Baffles

Experimental thermal-hydraulic performances of heat exchangers with different baffle patterns

Experimental Investigation on Heat Transfer Enhancement of A Heat Exchanger with Helical Baffles Through Blockage of Triangle Leakage Zones

Structural Optimization of Self-Supporting Rectangular Converging-Diverging Tube Heat Exchanger

Internal Flow Analysis of a Heat Transfer Enhanced Tube with a Segmented Twisted Tape Insert

Numerical Investigation of Shell-Side Performance for Shell and Tube Heat Exchangers with Two Different Clamping Type Anti-Vibration Baffles

Experimental Performance Comparison of Shell-Side Heat Transfer for Shell-and-tube Heat Exchangers with Middle-Overlapped Helical Baffles and Segmental Baffles

Experimental study of enhanced heat transfer by flow-induced vibration of elastic tube bundles

Heat Transfer Intensification Mechanism of a Baffled Fluidized Bed Heat Exchanger

Numerical Investigation of a New Type Tube for Shell-and-tube Moving Packed Bed Heat Exchanger

Improvements on Maldistribution of a High Temperature Multi-Channel Compact Heat Exchanger by Different Inlet Baffles

Thermal Energy Transfer for Green Urban Development: Numerical Investigation on the Heat Transfer and Flow Noise in Heat Exchangers with Different Helical and Segmental Baffles