Abstract:Due to the growing electric vehicle market and new trends to reduce fuel consumption for a healthy environment, safe and reliable vehicles are desirable for reasons beyond EV and new technology. Although certain safety standards and legislation are in place and continuously improving but several concerns including battery safety, battery performance, vehicle structure, and battery design to be considered as these affect the overall reliability of Electric vehicles (EVs). Lithium-ion battery technology is considered a good solution to power electric vehicles but potential overheating due to stressful conditions such as mechanical abuse, overcharge, over-discharge, short circuit, and excessive heat from external environment gives rise to safety issues and the occurrence of one or more than one of these can lead to thermal runaway. In most cases, an electric short circuit is a necessary but not sufficient condition for the occurrence of thermal runaway after mechanical abuse. Chemistry of the cell, the resistance of separator to heat, size of the fractured part, and rate of heat transfer all play a role in processes leading to a thermal runaway, if the cell has not gone to thermal runaway right away it can still go into a slow process of electrochemical reaction, releasing gases that eventually could lead to a catastrophic event. This abstract investigates the mechanical behaviour of the separator in the LiCoO2/Graphite cylindrical 18650 cells. Internal short circuit (ISC) behaviour, strain rate dependency, and electrochemical status of the cells (i.e. SOC dependency) are studied to understand failure patterns. Furthermore, a simple and effective constitutive model for the separator layer is formed, facilitating further mechanical analysis and numerical simulation of lithium-ion battery study. The occurrence of ISC is investigated by jellyroll deformation where the casing is removed, and quasi-static load is applied. The numerical simulation model is developed to further investigate sequential structural failures and temperature changes. Simulation results showed good accuracy with experimental results and are useful to predict structural failure of cells. The number of failures including electrolyte leakage, change in shape, sudden voltage drop/temperature rise, and gas venting are observed.

Revealing the Impact of Slight Electrical Abuse on the Thermal Safety Characteristics for Lithium-Ion Batteries

Comprehensive Investigation of a Slight Overcharge on Degradation and Thermal Runaway Behavior of Lithium-Ion Batteries

Impact of Low Temperature Exposure on Lithium-Ion Batteries: A Multi-Scale Study of Performance Degradation, Predictive Signals and Underlying Mechanisms

Analysis of Internal Short Circuit and Thermal Runaway of Li-Ion Battery Due to Mechanical Abuse

Experimental analysis and safety assessment of thermal runaway behavior in lithium iron phosphate batteries under mechanical abuse

Study on Thermal Safety of the Overcharged Lithium-Ion Battery

Thermal Safety Study of Li‐ion Batteries under Limited Overcharge Abuse Based on Coupled Electrochemical‐thermal Model

Abuse by External Heating, Overcharge and Short Circuiting of Commercial Lithium-Ion Battery Cells

Research on Overcharge and Overdischarge Effect on Lithium-Ion Batteries

Revealing the Impact of Fast Charge Cycling on the Thermal Safety of Lithium-Ion Batteries

Research on Influencing Factors About Temperature of Short Circuit Area in Lithium-Ion Power Battery

A Comparative Investigation of Aging Effects on Thermal Runaway Behavior of Lithium-Ion Batteries

Heat generation and thermal runaway of lithium-ion battery induced by slight overcharging cycling

Recent Progress in Lithium-Ion Battery Thermal Management for a Wide Range of Temperature and Abuse Conditions

Comparison of the Overcharge Behaviors of Lithium-ion Batteries under Different Test Conditions

Evolution mechanism and non-destructive assessment of thermal safety for lithium-ion batteries during the whole lifecycle

Study on Thermal Runaway Behavior of Li-Ion Batteries Using Different Abuse Methods

Heat generation and thermal runaway mechanisms induced by overcharging of aged lithium-ion battery

Safety Performance and Failure Criteria of Lithium-Ion Batteries under Mechanical Abuse

Investigating the Relationship Between Internal Short Circuit and Thermal Runaway of Lithium-Ion Batteries under Thermal Abuse Condition

Study on Topographic, Electrochemical, and Safety Characteristics of Lithium‐ion Cells after Long‐term Storage at Abusive‐temperature Environments