Abstract:All spacecrafts in low orbit are subjected to hypervelocity impacting by meteoroids and space debris. These impacts can damage spacecraft flight-critical systems, leading to catastrophic failure of the spacecraft. In order to protect the safety of an orbiting spacecraft, the shield for meteoroids and space debris becomes an indispensable factor in the design of a spacecraft, especially those with long orbital life and large size structures. Because the major debris-cloud represents the most severe threat to rear wall integrity, researches on the major debris-cloud features are very important. In this paper, the numerical simulations for major debris-cloud features produced by a sphere projectile normal impacting on a single-sheet bumper at hypervelocity have been carried out using the SPH technique of AUTODYN. The major debris-cloud features include the effects of debris-cloud morphology, normalized axial velocity and radial velocity. These features vary with bumper-thickness-to-projectile-diameter ratios (t/D) and impact velocities. The impact velocities are from 1 to 14km/s. The bumper and projectile materials are aluminum. The ratio t/d is from 0.0105 to 0.525. Effects of impact velocity and t/d on the major debris-cloud features have been investigated. It is shown that the major debris-cloud features have remarkable differences with various t/d and impact velocities. As the t/D ratio is increased and impact velocity is constant, the major debris-cloud morphology varies. The diameter of center element and the radial debriscloud velocities increases. At the same time, radial expansion and the shell of spall fragments at the rear element, size of fragments in the center and rear elements and the axial debris-cloud velocities decreases. As t/D ratio is held constant, debris-cloud hardly occurs at the low velocity. As the impact velocity increases, fragmentation of sphere and radial expansion of internal elements increase. At the same time, the axial debris-cloud velocities increase and the radial debris-cloud velocities increase. The simulation results show that the bumper thickness has an optimizing value.

Collision Probability of Debris Clouds Based on Higher-Order Boundary Value Problems

Short-Term Collision Probability Caused by Debris Cloud

Modeling Medium-Term Debris Cloud of Satellite Breakup via Probabilistic Method

An Analytic Method of Space Debris Cloud Evolution and Its Collision Evaluation for Constellation Satellites

Numerical Simulation of Debris Cloud Produced by Ellipsoidal Projectile Hypervelocity Impact on Bumper

Numerical Simulation of Major Debris-Cloud Features Produced by Projectile Hypervelocity Impact on Bumper

Numerical simulation of characteristics of debris cloud produced by projectile hypervelocity impact on bumper

Analytical Propagation of Space Debris Density for Collisions near Sun-Synchronous Orbits

Model Ing and Analysis on the Long-Term Evolution of the Space Debris Cloud

Adjusting the catastrophic collision model using outer probability measure theory

Investigation into Debris Cloud Characterizations for Oblique Hypervelocity Impact of Projectiles on Bumper

Collision Risk Assessment for a Spacecraft in the Space Debris Environment

Density-based in-orbit collision risk model extension to any impact geometry

Analytical framework for space debris collision avoidance maneuver design

Collision risk investigation for an operational spacecraft caused by space debris

Numerical simulation of debris cloud propagation inside gas-filled pressure vessels under hypervelocity impact

Survivability assessment of spacecraft impacted by orbit debris

Risk assessment of debris flow disaster based on the cloud model—Probability fusion method

Probability of Collision of satellites and space debris for short-term encounters: Rederivation and fast-to-compute upper and lower bounds

Discrete Evolution Model Based on Mean Spatial Density for Space Debris Environment

Density-based in-orbit collision risk model valid for any impact geometry