Abstract:The correct electric power fluctuation process of a wind farm is essential for the operation and studying of the power grid integrated with wind power. A complete wind energy conversion model, that should take both the spatial effects and the overall effect of all the pitch angle controllers into account, is required to convert the wind fluctuation into the electric power fluctuation. Although some equivalent models have been proposed in previous studies, there is no simple solution for equivalently modeling the non-synchronous actions of the pitch angle controllers in individual wind turbine generators. This study found the relationship between the overall effect of all the pitch angle controllers and the spatial effects of the wind farm and presented a theoretical derivation of the frequency-domain equivalent modeling method. The proposed modeling method is the simplest way to obtain the equivalent model of the complete wind energy conversion process of a wind farm with consideration of all the spatial effects and the overall effects of all the pitch angle controllers. The only input signal of the proposed equivalent model is the speed of the wind before entering the wind farm, which is called the "original incoming wind speed" and the only output signal is the total power of the wind farm. In this proposed equivalent modeling method, a discrete transfer function for representing both the wind energy conversion process, and all the spatial effects of a wind farm, can be obtained, first through a wind process below the rated wind speed. Second, a compensation factor for calculating a "compensation wind speed" of the original incoming wind can be obtained through a wind process that partly exceeds the rated wind speed. Using this compensation wind speed, a compensation power with negative values can be obtained to represent the total reduced power caused by the pitch angle controllers in individual wind turbine generators. A frequency-domain equivalent model has been identified and validated by field measurements of an actual wind farm. The normalized root-mean-squared error of the model is less than 8% over the entire wind process, and the maximum error of the power ramp rate in 10 min is less than 5 MW. Finally, an example is provided to demonstrate the online use of the proposed model to convert the forecasted wind speed into output power of a wind farm in ultrashort-term wind power forecast.

Novel Method for Estimating Utility Harmonic Impedance for a Direct-Drive Permanent Magnet Synchronous Generator Wind Farm

Equivalent Modeling of Wind Energy Conversion Considering Overall Effect of Pitch Angle Controllers in Wind Farm

Online Identification of Static Characteristic Coefficients of Wind Farm Based on Small Disturbances

A Novel Full Electrical Parameters Estimation Method of Permanent Magnet Linear Synchronous Machines Considering Parameter Asymmetry

Equivalent modeling of wind farm in frequency domain

Impedance-model-based SSR Study Considering DFIGs at Different Locations

Multiplane Rotor Resistance Online Estimation Strategy for Multiphase Induction Machine under Nonsinusoidal Power Supply

A Harmonic Impedance on Utility Side Estimation Method Based on Laplace Mixture Model

Modeling Principle and Parameter Identification of Double Fed Wind Turbine for Electromechanical Transient Simulation of Power System

Unit Power Factor Control of Direct-Drive Permanent Magnet Wind Generator

Harmonic and Fundamental Rotor Resistance Estimation Scheme for Multiphase Induction Motor Based on Nonsinusoidal Supply Control

Impedance Aggregation Method of Multiple Wind Turbines and Accuracy Analysis

Intelligent Parameter Design-Based Impedance Optimization of STATCOM to Mitigate Resonance in Wind Farms

Simplified Mathematical Model of Inter-Turn Short Circuit of Field Windings in Hydro-Generators and Its Application

Modified Single-Machine Aggregation of Wind Farms Based on Parameter Identification of the Impedance Network

Adaptive Parameter Estimation for Static Var Generators Based on Wind Speed Fluctuation of Wind Farms

Wideband Impedance Online Identification of Wind Farms Based on Combined Data-Driven and Knowledge-Driven

A Comparative Sub-Synchronous Resonance Analysis of Grid-Connected Doubly Fed Induction Generator Based and Permanent Magnet Synchronous Generator Based Wind Farms

Harmonic Impedance Modeling of DFIG Considering Dead Time Effect of Rotor Side Converter

Impedance Modeling Based Method for Sub/Supsynchronous Oscillation Analysis of D-PMSG Wind Farm

An Approach to Establish Detailed Model of DFIG Based Wind Farm