Abstract:Polymer coatings have been widely used in the automobile industry for the corrosion protection of metallic materials. However, the failures of the polymer materials are caused by the extensive exposure of the coated steel to the aggressive electrolytes. To enhance the protective performance of the polymer coatings, functionalized nanoparticles are added to the polymers. The 2-aminothiazole (AT) modified TiO2–ZrO2 nanoparticles examined by Fourier transformed infrared spectroscopy (FTIR), scanning electron microscopy/energy-dispersive X-ray analysis (SEM/EDX), transmission electron microscopy (TEM), and X-ray diffractometry (XRD) were added to polyurethane (PU). The synthesized PU–AT/TiO2–ZrO2-coated specimen was studied by scanning electrochemical microscopy (SECM), potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) for their anti-corrosion and mechanical behaviours. EIS studies revealed excellent protection behaviour for the PU–AT/TiO2–ZrO2-coated steel in natural seawater. The coating resistance of the PU–AT/TiO2–ZrO2 nanocomposite was found to be 1970.17 kΩ.cm2, whereas lower coating resistance was observed for the pure polyurethane-coated steel (62.17 kΩ.cm2. It is found that the coating resistance of PU–AT/TiO2–ZrO2 nanocomposite is over 48% higher than that of the PU coating. The measured current by SECM investigation over the PU–AT/TiO2–ZrO2 nanocomposite coating was very low (1.4 nA) in comparison with the PU coating (6.1 nA). The surface morphological studies of the coated steel by SEM/EDX analysis and X-ray diffraction (XRD) analysis revealed that the TiO2–ZrO2 nanoparticles were enriched at the corrosion products which prevented corrosion initiation processes. The enhanced dynamic mechanical properties were noticed for PU–AT/TiO2–ZrO2 coating when the concentration of nanoparticles was 3 wt%. However, there was a decrease in their mechanical properties beyond 3 wt% because of the aggregation of nano-TiO2–ZrO2 particles in the PU matrix. The resulting PU–AT/TiO2–ZrO2 formulation exhibits an excellent hydrophobic behaviour (WCA: 116.9º). Therefore, it was concluded from the investigations that the newly synthesized PU–AT/TiO2–ZrO2 nanocomposite provided excellent barrier, mechanical, and hydrophobic properties due to the addition of AT/TiO2–ZrO2 nanoparticles to the polyurethane which prevented the degradation of materials and helped to prolong the life of the coated steel.

Highly stretchable polyurethane coating based on functionalized cerium oxide nanoparticles for anti-corrosive/UV protection

Stretchable and self-healing polyurethane coating with synergistic anticorrosion effect for the corrosion protection of stainless steels

CeO2 grafted carbon nanotube via polydopamine wrapping to enhance corrosion barrier of polyurethane coating

Fabrication of self-healable superhydrophobic polyurethane coating based on functional CeO 2 nanoparticles for long-term anti-corrosion application

Electrochemical and dynamic mechanical properties of polyurethane nanocomposite reinforced with functionalized TiO2–ZrO2 nanoparticles in automobile industry

Long-lasting anti-corrosion direct-to-metal polyurethane NP-GLIDE coatings based on the coordination effect and dual cross-linking of polyphenol

A self-healing polyurethane-based composite coating with high strength and anti-corrosion properties for metal protection

Preparation of a novel IPDI/PUF@CeO2 bi-functional microcapsules and its improvement for the self-healing and anti-corrosion performance in epoxy coatings

Surface modified molybdenum disulfide nanosheets for corrosion resistance improvement on polyurethane coatings

Enhanced hydrophobicity of polyurethane coating for steel protection through replication and nanomaterial integration

Synergistic effect of 8-HQ@CeO 2 for enhanced corrosion resistance of self-healing polyurethane coating for corrosion protection of mild steel

Constructing Dual-Ligand Ce-MOF on Graphene Oxide Modified with Polydopamine Endowing Polyurethane Coating with Long-Term Smart Anti-Corrosion and Mechanical Robustness

Polyurethane Coatings with Corrosion Inhibition and Color-Fluorescence Damage Reporting Properties Based on APhen-grafted Carbon Dots

Lubrication, wear resistance and corrosion protection on aluminum alloy toward multifunctional coatings with nano-CeO2 inhibition effect

A Polyurea Capturing Both High Strength and Rapid Self-Healing Tailored for Intelligent Barrier Anti-Corrosion System

Functional UV Blocking and Superhydrophobic Coatings Based on Functionalized CeO2 and Al2O3 Nanoparticles in a Polyurethane Nanocomposite

Double-layer with electroactive and superhydrophobicity based on polymer nanotubes to improve robustness and anti-corrosion performances

Improvement of the Abrasion and Corrosion Resistance of a Waterborne Epoxy Coating by α-ZrP@PTA-Ce(III) with Dual Corrosion Inhibition Effects

Constructing multi-protective functional polyurethane composite coating via internal-external dual modification: Achieving superhydrophobicity, enhanced barrier, corrosion inhibition, and UV aging resistance properties

Enhancing the protective performance of anti-impact, corrosion resistant and flame retardant polyurea coatings using bio-based supramolecular decorated montmorillonite

A Novel Cerium Organic Network Modified Graphene Oxide Prepared Multifunctional Waterborne Epoxy-Based Coating with Excellent Mechanical and Passive/active Anti-Corrosion Properties