Abstract:With the booming growth market of electric vehicles and portable electronics, high-energy-density rechargeable lithium ion batteries are being extensively used to advance high-end devices. Lithium-ion batteries with graphite anodes approach the ceiling in energy density, but they cannot satisfy the current demand. Among the next-generation electrodes, lithium metal anodes are strong candidates because of their high theoretical capacity and the most negative electrochemical potential. However, lithium metal batteries have been abandoned because of their poor safety resulting from the growth of lithium dendrites during lithium deposition. Although several strategies have been proposed to suppress the generation of lithium dendrites as well as the side reactions between active lithium and the electrolyte, lithium metal anodes have not been practically applied so far. Various studies have been conducted on the factors influencing lithium deposition, with the aim of understanding the growth behavior of lithium dendrites. The electrolyte plays a crucial role in the performance of the working Li metal anode. In this study, a unique battery system is proposed to realize columnar lithium deposition, which is convenient for obtaining the length and diameter of lithium deposits. The influence of different electrolytes on lithium deposition was investigated by comparing the length-diameter (L/D) ratio of the lithium deposits in two kinds of electrolytes (1.0 mol.L-1 LiPF6-ethylene carbonate/diethyl carbonate (EC/DEC, 1 : 1 by volume) and 1.0 mol.L-1 LiPF6-5% (volume fraction) fluoroethylene carbonate (FEC)-EC/DEC (1 : 1 by volume)). The morphology of the lithium deposits was strongly affected by the electrolyte composition. In the electrolyte with the FEC additive, the diameter of columnar lithium increased from 0.3-0.6 mu m to 0.7-1.3 mu m, while the L/D ratio decreased from 12.5 to 5.6. The small L/D ratio can reduce the reactive area between the lithium metal anode and the electrolyte, which is beneficial for achieving high lithium utilization and a long lifespan. To probe the origin of this influence, the surface chemistry of the cycled lithium metal anode was investigated by X-ray photoelectron spectroscopy. The FEC additive can increase the proportion of lithium fluoride (LiF) in the solid electrolyte interphase, which is conducive for the rapid diffusion of lithium ions. As a result, fewer nucleation sites are formed, providing more space for the growth of lithium cores with a large diameter. Therefore, the addition of FEC leads to a decrease in the L/D ratio of columnar lithium.

Dendrite-Free and Micron-Columnar Li Metal Deposited from LiNO3-Based Electrolytes

Suppressing Lithium Dendrite Growth with Nanoparticle-Dispersed Colloidal Electrolytes

An Ion-Released MgI 2 -Doped Separator Inducing a LiI-containing Solid Electrolyte Interphase for Dendrite-Free Li Metal Anodes

Solvent-derived Inorganic F and N-rich Solid Electrolyte Interface for Stable Lithium Metal Batteries

Constructing an Inorganic-Rich Solid Electrolyte Interphase by Adjusting Electrolyte Additives for Stable Li Metal Anodes

A Highly Reversible, Dendrite‐Free Lithium Metal Anode Enabled by a Lithium‐Fluoride‐Enriched Interphase

Dendrite-free lithium metal anode with lithiophilic interphase from hierarchical frameworks by tuned nucleation

In-Situ Electrodeposition of Nanostructured Carbon Strengthened Interface for Stabilizing Lithium Metal Anode

An artificial layer enables in situ generation of a homogeneous inorganic/organic composite solid electrolyte interphase for stable lithium metal batteries

Dendrite‐Free Li‐Metal Anode Enabled by Dendritic Structure

Dendrite-free Lithium Metal Anode Enabled by Separator Engineering Via Uniform Loading of Lithiophilic Nucleation Sites

Columnar Lithium Metal Deposits: the Role of Non-Aqueous Electrolyte Additive

Constructing a conductive solid electrolyte interface by adding lithium nitrate into carbonate electrolyte for stable lithium metal anode

In-situ Formation of LiF-rich Solid-Electrolyte Interphases on 3D Lithiophilic Skeleton for Stable Lithium Metal Anode

Construction of a Dense and Li-N Rich Solid Electrolyte Interface for Dendrite-Free Lithium Metal Batteries

Effective Electron–ion Percolation Network Enabled by in Situ Lithiation for Dendrite-Free Li Metal Battery

Constructing multifunctional solid electrolyte interface via in-situ polymerization for dendrite-free and low N/P ratio lithium metal batteries

Conductivity gradient modulator induced highly reversible Li anodes in carbonate electrolytes for high-voltage lithium-metal batteries

Construction of a dense and N-rich solid electrolyte interface for dendrite-free lithium metal batteries

Homogeneous and Fast Li-Ion Transport Enabled by a Novel Metal–Organic-Framework-Based Succinonitrile Electrolyte for Dendrite-Free Li Deposition