Abstract:Recently, MOF-derived metal oxides have been demonstrated as excellent semiconductor materials. Their derivatives can retain the high porosity and high specific surface area of the parent MOFs, effectively improving the adsorption capacity and mass transfer rate of reactive substances. Herein, UiO-67 was selected as the substrate due to its high hydrothermal stability and high specific surface area. Through the in situ growth of TiO2 nanoparticles, a series of double metal composite catalysts (ZrxTi/C) were produced after calcination at 400 degrees C. The X-ray diffraction (XRD) patterns showed that the UiO-67 crystal structure of collapsed after calcination, forming a Zr-O-C/TiO2 heterojunction. Energy-dispersive spectrometry (EDS) mapping images showed that Ti, Zr, and O were evenly distributed throughout the materials without obvious aggregation. Compared to conventional inorganic semiconductor materials, ZrxTi/C heterojunction catalysts provided much higher BET surface area (317 m(2)g(-1)) for the effective enrichment of contaminants on the catalyst surface. Tetracycline was selected as a representative antibiotic to study photodegradation performance under a 300 W Xenon lamp. Among the obtained catalysts, the Zr0.3Ti/C heterojunction catalyst exhibited the best photocatalytic efficiency, achieving 98% degradation within 30 min in a 10 mg.L-1 tetracycline solution. Fluorescence spectra, electrochemical impedance spectroscopy, and transient photocurrent responses showed that the Zr0.3Ti/C heterojunction catalyst exhibited the fastest charge-hole separation rate and a maximum photocurrent density of 8.75 mu A.cm(-2), which was 2.64 and 3.71 times those of UiO-67 and UiO-67(0.3)/TiO2, respectively. The mechanism of tetracycline photodegradation was determined by UV-visible diffuse-reflectance absorption spectroscopy, Mott-Schottky plots, and electron spin resonance technology. A direct Z-scheme charge separation path was formed by the transfer and recombination of photoexcitede. in the conduction band (CB) of Zr-O-C with h(+) in the valence band (VB) of TiO2, which effectively reduced the combination rate of e. and h(+) in Zr-O-C and TiO2. The photodegradation rate constant of Zr0.3Ti/C was 16 and 3.7 times those of TiO2 and Zr-O-C, respectively, due to its large specific surface area and excellent tetracycline adsorption performance. Furthermore, the Zr-O-C/TiO2 heterostructure exhibiting suitable energy level matching and containing highly conductive carbon material improved the separation and migration of electron-hole pairs. Mechanistic studies revealed that the three types of radicals, superoxide radicals (O-2(center dot-)) ,hydroxyl radicals (center dot OH), and a small amount of holes (h(+)) simultaneously promoted tetracycline photodegradation. After five recycling tests, Zr0.3Ti/C heterojunction catalyst maintained 91.2% removal efficiency for tetracycline, indicating good cycle stability. Combining the synergistic effects of adsorption and photodegradation, using bimetallic heterojunction composites with high specific surface area is promising for the photodegradation of environmental pollutants.

Photocatalytic Removal of Antibiotics by MOF-derived Ti3+- and Oxygen Vacancy-Doped Anatase/rutile TiO2 Distributed in a Carbon Matrix

Synergistic effect of N doping and oxygen vacancies over TiO 2 nanosheets with enhanced photocatalytic removal of tetracycline

Synergistic Effect of N Doping and Oxygen Vacancies over TiO2 Nanosheets with Enhanced Photocatalytic Removal of Tetracycline

In-situ one-step preparation of anatase/rutile TiO<sub>2(A/R)</sub> with oxygen vacancy modification derived from 2D Ti<sub>3</sub>C<sub>2</sub> for enhanced visible-light-driven photodegradation of tetracycline

MOF-derived In2O3/TiO2 S-scheme heterojunction for efficient photocatalytic degradation of tetracycline

In-situ one-step preparation of anatase/rutile TiO2(A/R) with oxygen vacancy modification derived from 2D Ti3C2 for enhanced visible-light-driven photodegradation of tetracycline

S-scheme photocatalyst Mo2C/α-Fe2O3 with vacant oxygen for highly efficient tetracycline degradation in peroxymonosulfate-mediated photocatalytic system

S-scheme photocatalyst Mo<sub>2</sub>C/-Fe<sub>2</sub>O<sub>3</sub> with vacant oxygen for highly efficient tetracycline degradation in peroxymonosulfate-mediated photocatalytic system

MXene-like Carbon Sheet/carbon Nanotubes Derived from Metal-Organic Frameworks for Efficient Removal of Tetracycline by Non-Radical Dominated Advanced Oxidation Processes

Photocatalytic Degradation of Tetracycline in Aqueous Solution by Nanosized TiO2

CeO<sub>x</sub>-coupled MIL-125-derived C-TiO<sub>2</sub> catalysts for the enhanced photocatalytic abatement of tetracycline under visible light irradiation

Highly Efficient Photocatalytic Degradation of Tetracycline Using a Bimetallic Oxide/Carbon Photocatalyst

MOFs-derived Bi2O3@C with rich oxygen vacancies through rapid thermal annealing technology for photodegradation of tetracycline hydrochloride

Fabrication of water-floating litchi-like polystyrene-sphere-supported TiO2/Bi2O3 S-scheme heterojunction for efficient photocatalytic degradation of tetracycline

Oxygen vacancy-mediated sandwich-structural TiO2−x /ultrathin g-C3N4/TiO2−x direct Z-scheme heterojunction visible-light-driven photocatalyst for efficient removal of high toxic tetracycline antibiotics

Ti-MOG Derived TiO2 Facet Heterojunction Rich in C/Ti3+/Ov for Adsorption-Photocatalytic Removal of Pharmaceutical Pollutants from Water

Z-scheme Heterojunction of TiO2/NH2-MIL-125(Ti) Growing on Carbon Fibers Cloth: Photocatalytic Degradation of Tetracycline and Toxicity Analysis

Oxygen Vacancies Modified TiO2/O‐Terminated Ti3C2 Composites: Unravelling the Dual Effects between Oxygen Vacancy and High‐Work‐Function Titanium Carbide

Preparation of Bi4Ti3O12/TiO2 by flame spray pyrolysis for photoelectrocatalytic degradation of tetracycline

Enhancing photocatalytic performance of Ni-Ti bimetallic metal-organic frameworks for tetracycline degradation under visible light irradiation

CeOx-coupled MIL-125-derived C-TiO2 catalysts for the enhanced photocatalytic abatement of tetracycline under visible light irradiation