Abstract:Compaction processes within mudstone samples across varying depths (723.5–3213.5 m) in the Vienna Basin were investigated, focusing on porosity changes and the resulting micromechanical response in the clay-rich, fine-grained fraction ("clay matrix"). A novel approach combining nanoindentation mapping with machine learning data analysis was developed to efficiently extract representative micromechanical parameters of the clay matrix. Emphasis was put on capturing the properties of the fine-grained, clay-dominated composite rather than individual mineral phases, enabling the analysis of compaction-induced strength changes at microscale. A significant enhancement in the mechanical strength of the clay matrix with increasing burial depth was observed. Reduced elastic modulus ( E r ) and hardness ( H ) increased from 6.8 ± 3.4 to 22.6 ± 7.5 GPa and from 0.2 ± 0.2 to 0.9 ± 0.2 GPa, respectively, over the depth interval of 2490 m. Moreover, a strong correlation between depth and porosity and consequently micromechanical properties of the clay matrix exists. This highlights the substantial influence of intra-clay porosity on mechanical properties, which follow a general compaction trend with depth. Broad ion beam-scanning electron microscopy (BIB-SEM) analysis was used for textural investigations at micro-to nanoscale and indicated that the reduction in porosity predominantly resulted from mechanical compaction rather than mineral diagenesis, which would have been noticeable by signs of significant dissolution or cementation. The correlation coefficient matrix between multiscale porosity measurements and nanoindentation affirmed that the porosity loss was closely linked to the enhanced mechanical properties of the fine-grained composite clay matrix, while other compositional variables like total clay mineral content showed weak correlations. Empirical mathematical equations were derived to describe the mechanical properties as generalized functions of depth and porosity. These may be used as geomechanical input for future basin analysis and geoenergy applications (e.g., seal rock studies in a geological storage context). This study introduces a new approach to unravel compaction processes in fine-grained rocks at microscale, emphasizing the interplay between intra-clay porosity and micromechanical changes during proceeding burial.

Strengthening Mechanisms in Cement-Stabilized Kaolinite Revealed by Cross-Scale Nanoindentation

Deformation and Failure Processes of Kaolinite under Tension:Insights from Molecular Dynamics Simulations

Microscopic phase identification of cement-stabilized clay by nanoindentation and statistical analytics

Fundamental Mechanical Behavior of CMMOSC-S-C Composite Stabilized Marine Soft Clay

Stabilization Nature and Unified Strength Characterization for Cement-Based Stabilized Soils

Nanoindentation Characteristics of Cementitious Materials Containing Lithium Slag

Study on the Effects and Mechanism of the Reinforcement of Soft Clay Via Microbially Induced Carbonate Precipitation

Mechanical Characterization of Main Minerals in Carbonate Rock at the Micro Scale Based on Nanoindentation

Micromechanical Properties of Biocemented Shale Soils Analyzed Using Nanoindentation Test

Nanoscale mechanical behavior of kaolinite under uniaxial strain conditions

Coarse-grained molecular dynamics study on submicron structuring of calcium silicate hydrate with enhanced tensile modulus and strength

Nanoindentation Approach for Investigation of Cement Phase

Multiscale Modeling of Elastic Modulus Across Micro-Meso-Macroscales Based on Grid-Nanoindentation Test for Cementitious Materials

Unraveling mudstone compaction at microscale: A combined approach of nanoindentation mapping and machine learning data analysis

Micromechanical analysis of the behavior of stiff clay

Nano-scale mechanical properties of constituent minerals in shales investigated by combined nanoindentation statistical analyses and SEM-EDS-XRD techniques

Nanoindentation-based characterization of micromechanical properties of greenish mudstone from deep Fushun West open-pit mine (Fushun city, China)

The Influence Mechanism of Interfacial Characteristics between CSH and Montmorillonite on the Strength Properties of Cement-Stabilized Montmorillonite Soil

Cross-scale Characterization of Sandstones Via Statistical Nanoindentation: Evaluation of Data Analytics and Upscaling Models

Nano–micro Modelling of Mechanical Properties of Cement Paste Based on Molecular Dynamics

Strategies for simultaneous strengthening and toughening via nanoscopic intracrystalline defects in a biogenic ceramic