Abstract:Concrete's widespread use in construction is increasing due to urbanization and population growth. While it offers durability and strength, its production poses environmental challenges. Researchers and global initiatives are working towards more sustainable concrete production methods and effective waste management, particularly for paper waste (WPA) and polyethylene terephthalate waste (PET). This study aims to investigate the effects of waste paper aggregate (WPA) on the flow time, compressive strength, flexural strength, and thermal conductivity of mortars. Furthermore, it explores the potential of polyethylene terephthalate (PET) to enhance the compressive and flexural strengths of these mortars. To conduct this study, the materials were characterized using EDX spectroscopy and SEM analysis. Gwyddion software was employed to conduct a comprehensive analysis of the grain segmentation and microstructural characteristics of the WPA mortars. Subsequently, four distinct mixtures were selected for further investigation. The first mixture involved substituting sand with various percentages of waste paper aggregate (WPA) (1–4%) without PET. The second mixture included WPA (1–4%) and 5% PET. Due to the ineffective plasticizer in the first two mixtures, the third mixture replaced 20% of quarry sand with dune sand (DS) while maintaining the same percentages of WPA and PET as in the previous mixtures. The results indicate that mortars RM1 (0% WPA + 0% PET) and RM2 (0% WPA + 0% PET + 20% DS) demonstrated the best flow time. This suggests that incorporating WPA and PET into the mortar mix can negatively impact its workability, making it more challenging to handle, shape, and apply. Sample PW4, composed of 4% WPA and 0% PET, displayed a significant increase in compressive strength from 46.36 MPa to 49.81 MPa and flexural strength from 10.5 MPa to 11.47 MPa, indicating that incorporating WPA into the mortars can enhance resistance to both compressive and flexural strengths. This same mixture, PW4, demonstrated that the mortars are poor conductors of heat and would be more effective as thermal insulators. Grain segmentation of WPA mortars using Gwyddion software revealed that shorter WPA fibers tend to align with the width, while longer WPA fibers tend to align with the length of the section.

Preparation of polybutylene terephthalate/artificial marble wastes composites with simultaneously enhanced thermal, crystallization, and impact properties by in situ polymerization

The Impact of Artificial Marble Wastes on Heat Deflection Temperature, Crystallization, and Impact Properties of Polybutylene Terephthalate

Effects of Maleic Anhydride-Grafted Polyethylene on the Properties of Artificial Marble Waste Powder/Linear Low-Density Polyethylene Composites with Ultra-High Filling Content

Polymorphic Crystals from Different Thermal Treatments and Its Effect on Biodegradation Behavior of Poly(butylene Adipate)

Effect of Copolymerized Butylene Terephthalate Chains on Polymorphism and Enzymatic Degradation of Poly(Butylene Adipate)

Effects of Wood Content and Modification on Properties of Wood Flour/Polybutylene Adipate Terephthalate Biocomposites

Porous‐structured vermiculite/polybutylene adipate terephthalate composite films: The morphology, mechanical properties, and nonisothermal degradation kinetics

Evaluating fresh and hardened properties of mortar composite with different types of modified polyethylene terephthalate (PET) materials as additives: Modification effects, surface properties, shape factors

Recycling of Waste Artificial Marble Powder in HDPE‐wood Composites

Isothermal crystallization kinetics and mechanical properties of poly(butylene terephthalate)/attapulgite nanocomposites

Preparation and characterization of poly(butylene terephthalate) nanocomposites from thermally stable organic-modified montmorillonite

Toughness and crystallization enhancement in wood fiber-reinforced polypropylene composite through controlling matrix nucleation

Effect of fatty acid methyl ester polyoxyethylene ether on the rheological properties of cement filled with artificial marble waste powders

Synthesis of Poly(Butylene Terephthalate)/Attapulgite Nanocomposites by In-Situ Polymerization and Its Crystallization Behavior

Fabrication of PMMA/phosphogypsum non-fired ceramic composites with improved mechanical and waterproof properties

Study of Poly(3-Hydroxybutyrate-Co-3-Hydroxyvalerate) (phbv)/bamboo Pulp Fiber Composites: Effects of Nucleation Agent and Compatibilizer

Influences of multi-walled carbon nanotubes incorporated into

A New Method Combining Modification of Montmorillonite and Crystal Regulation to Enhance the Mechanical Properties of Polypropylene

Effect of waste paper aggregate and polyethylene terephthalate on mortar performanCE

Enhancement of mechanical properties of poly(vinyl chloride) with Polymethyl methacrylate-grafted halloysite nanotube

Influence of Heat Treatment on the Heat Distortion Temperature of Poly(lactic Acid)/bamboo Fiber/talc Hybrid Biocomposites