Abstract:Carbon nanotube (CNT)/cellulose nanocomposite films were prepared by a featured processing method, i.e., solution dispersion, slow gelation and hot-press drying, where an environmentally benign processing solvent (sodium hydroxide/urea aqueous solution) was used. The scanning electron microscopy and transmission electron microscopy demonstrated uniform CNT dispersion in the cellulose. The slow gelation and hot-press drying could effectively reduce the free volume and force the cellulose chains and CNTs to contact as close as possible, thus forming the strong interfacial hydrogen bonding between the residual oxygen-containing functional groups on the CNT surfaces and the hydroxyl groups in the cellulose chains, as confirmed by X-ray photoelectron spectroscopy and Fourier transformation infrared spectroscopy results. As a result, with a CNT loading of 5 wt %, the tensile strength and Youngs modulus of the cellulose nanocomposite films were increased by 55% and 21% relative to neat cellulose film. More interestingly, the tensile toughness reached 5.8 MJ/m(3), about 346% higher than that of neat cellulose film. This simultaneous reinforcement and toughening of cellulose by only incorporating the pristine CNTs has been rarely reported. The reason could be explained in the terms of the fortified interfacial hydrogen bonding, which not only facilitated the stress transfer in the interfacial region but also reduced the density of hydrogen bonding network in the intra- and intermolecular chains of cellulose so as to enhance the plastic deformation of the cellulose nanocomposite films significantly. In addition, a good conductivity of 7.2 S.m(-1) was achieved with a percolation threshold of as low as 0.71 vol %. The strategy proposed here is simple, low cost, efficient and green, exhibiting great potential for fabricating high-performance and multifunctional CNT/cellulose nanocomposite films used in the realms of antistatic packages, electromagnetic shielding, electrodes, sensors and electric smart brands.

Highly Conductive and Multifunctional Nanocomposites Based on Sulfated Nanocellulose-Assisted High Dispersion Limit of Single-Walled Carbon Nanotubes

Highly Conductive Nanocomposites Based on Cellulose Nanofiber Networks Via NaOH Treatments

High-Performance Cellulose Nanofibers/Carbon Nanotubes Composite for Constructing Multifunctional Sensors and Wearable Electronics

Highly Conductive Ink Based on Self‐Aligned Single‐Walled Carbon Nanotubes through Inter‐Fiber Sliding in Cellulose Fibril Networks

Aqueous Dispersion of Carbon Fibers and Expanded Graphite Stabilized from the Addition of Cellulose Nanocrystals to Produce Highly Conductive Cellulose Composites

Microwave Rapid Synthesis of Nickel Cobalt Sulfides/cnts Composites As Superior Cycling Ability Electrode Materials for Supercapacitors

Highly stable silver nanowire dispersion assisted by sulfated holocellulose nanofibers for functional materials

Cellulose‐Nanofiber‐Enabled 3D Printing of a Carbon‐Nanotube Microfiber Network

Efficient Dispersion of Carbon Nanotube by Synergistic Effects of Sisal Cellulose Nano-Fiber and Graphene Oxide

Cellulose nanofiber-assisted dispersion of cellulose nanocrystals@polyaniline in water and its conductive films

Simultaneous Reinforcement and Toughening of Carbon Nanotube/Cellulose Conductive Nanocomposite Films by Interfacial Hydrogen Bonding

Eco-Friendly Bioinspired Interface Design for High-Performance Cellulose Nanofibril/Carbon Nanotube Nanocomposites

Exceeding High Concentration Limits of Aqueous Dispersion of Carbon Nanotubes Assisted by Nanoscale Xylan Hydrate Crystals

Conductive Biomass-Based Composite Wires with Cross-Linked Anionic Nanocellulose and Cationic Nanochitin As Scaffolds

A novel strategy to prepare high performance multifunctional composite films by combining electrostatic assembly, crosslinking, topology enhancement and sintering

Fabrication and Application of Carbon Nanotubes/cellulose Composite Paper

Dispersing boron nitride nanosheets with carboxymethylated cellulose nanofibrils for strong and thermally conductive nanocomposite films with improved water-resistance

High Electromagnetic Interference Shielding Effectiveness of Carbon Nanotube–Cellulose Composite Films with Layered Structures

Additive‐Free Dispersion of Single‐Walled Carbon Nanotubes and Its Application for Transparent Conductive Films

Novel PEDOT dispersion by in-situ polymerization based on sulfated nanocellulose

Optimizing Processes of Dispersant Concentration and Post-Treatments for Fabricating Single-Walled Carbon Nanotube Transparent Conducting Films