Abstract:Purpose Solder bumps for chip interconnections are downsizing from current approximately 100 μm to the expected 1 μm in future. As a result, the Cu-Ni cross-interaction in Cu/Solder/Ni solder joints will be more complicated and then strongly influence the growth of the intermetallic compounds (IMCs). Thus, it is critical to understand the fundamental aspects of interfacial reaction in micro solder joints. This paper aims to reveal the effect mechanism of reflow temperature and solder size on the interfacial reaction in Cu/Solder/Ni solder joints. Design/methodology/approach The Cu-Ni cross-interaction in the Cu/Sn/Ni micro solder joints with 50 and 100 μm solder sizes at 250°C and 300°C were observed, respectively. The line-type interconnects were soaked in silicone oil, and the temperature of the line-type interconnects was 250 ± 3°C and 300 ± 3°C, which were monitored by a fine K-type thermocouple, and followed by an isothermal aging process at various times. After aging, the specimens were removed from the silicone oil and cooled in the air to room temperature. Findings The major interfacial reaction product on both interfaces was (Cu,Ni) 6 Sn 5 , and the asymmetric growth of (Cu,Ni) 6 Sn 5 , evidenced by the thickness of (Cu,Ni) 6 Sn 5 IMCs at the Sn/Ni interface was always larger than that at the Sn/Cu interface, resulted from the directional migration of Cu atoms toward the Sn/Ni interface under Cu concentration gradient. The morphology of (Cu,Ni) 6 Sn 5 IMC at Sn/Cu interface was columnlike at 250°C, and which changed from columnlike to scallop with large aspect ratio at 300°C, while that at Sn/Ni interface gradually evolved from needlelike to the mixture of needlelike and layered at 250°C, and which evolved from needlelike to scallop with large aspect ratio at 300°C. The evolution of morphology of (Cu,Ni) 6 Sn 5 is attributed to the content of Ni. Furthermore, the results indicate that the Cu-Ni cross-interaction was stronger with small solder size and relatively low temperature in the Cu/Sn/Ni micro solder joints. Originality/value The asymmetric growth of (Cu,Ni) 6 Sn 5 in the Cu/Sn/Ni micro solder joints, evidenced by the thickness of (Cu,Ni) 6 Sn 5 IMCs at the Sn/Ni interface, was always larger than that at the Sn/Cu interface. The morphology evolution of (Cu,Ni) 6 Sn 5 IMC at both interfaces was attributed to the content of Ni. The Cu-Ni cross-interaction was stronger with small solder size and relatively low temperature in the Cu/Sn/Ni micro solder joints.

Research on Ni3Sn4 Intermetallic Compound for 5 M Diameter Cu/Ni/Sn-3.0Ag Micro Bumps

Effect of Ag addition on the mechanical properties of Cu/Ni/Sn/Ni/Cu microbump with a sub-10 micron bump thickness

A Cu/Ni/Cu/Sn1.8Ag Microbump Structure for Void-free Interface under Long Time High-Temperature Storage

Grain modification and formation of tough IMC phase in submicron Sn–Ag microbumps via doping Zn and Ni in Cu substrate

Interfacial Reaction and IMCs Growth Behavior of Sn3Ag0.5Cu/Ni Solder Bump During Aging at Various Temperatures

Growth behavior and morphology evolution of interfacial (Cu,Ni)6Sn5 in (001)Cu/Sn/Ni micro solder joints

First-Principles Study of Cu Addition on Mechanical Properties of Ni3Sn4-Based Intermetallic Compounds

Study on morphology and interface relationship between Ag3(Sn, In) and Cu6(Sn, In)5

Effect of reflow temperature and solder size on Cu-Ni cross-interaction in the Cu/Sn/Ni micro solder joints

Microstructural evolution of Cu–Sn–Ni compounds in full intermetallic micro-joint and in situ micro-bending test

Effect of the addition of Cu6Sn5 nanoparticles on the growth of intermetallic compounds at the interfaces of Sn3.0Ag0.5Cu solder joints

Mechanical Property Of Cu-Sn-Ni Intermetallics In The Full Intermetallic Micro-Joints Formed With Transient Liquid Phase Soldering

Surface protrusion induced by inter-diffusion on Cu-Sn micro-pillars

Study on the evolution of interfacial (Cu,Ni)6Sn5 and shear property of (111)Cu/Sn/Ni micro joints under isothermal and TG-bonding

A Study of Intermetallic Compounds in Tin Bumps during Multi-Reflows

Effects of Ni on the nucleation and growth behavior of Cu6Sn5 in Sn–8.5Cu alloy: An in situ observation

Interfacial reaction between Sn-Ag solder and electroless Ni-Fe-P diffusion barriers with different internal microstructure

Initial formation of CuSn intermetallic compounds between molten SnAgCu solder and Cu substrate

Metallurgical aspects and joint properties of Cu-Ni-In-Cu fine-pitch interconnects for 3D integration

Study on the metallurgical reaction law and mechanism of the Ni-xCu alloys/pure Sn solid-liquid interface

Bonding of 5 Μm Cu-Sn Micro Bumps Using Thermal Reflow and Solid-State Pre-Bonding