Abstract:In order to achieve desired mechanical properties of alloys by manipulating grain boundaries (GBs) via solute decoration, it is of great significance to understand the underlying mechanisms of microstructural evolution and plastic deformation. In this work, nanocrystalline (NC) Cu-W alloyed films with W concentrations spanning from 0 to 40 at% were prepared by using magnetron sputtering. Thermal stability (within the temperature range of 200 °C-600 °C) and hardness of the films were investigated by using the x-ray diffraction, transmission electron microscope (TEM) and nanoindentation, respectively. The NC pure Cu film exhibited substantial grain growth upon all annealing temperatures. The Cu-W alloyed films, however, displayed distinct microstructural evolution that depended not only on the W concentration but also on the annealing temperature. At a low temperature of 200 °C, all the Cu-W alloyed films were highly stable, with unconspicuous change in grain sizes. At high temperatures of 400 °C and 600 °C, the microstructural evolution was greatly controlled by the W concentrations. The Cu-W films with low W concentration manifested abnormal grain growth (AGG), while the ones with high W concentrations showed phase separation. TEM observations unveiled that the AGG in the Cu-W alloyed thin films was rationalized by GB migration. Nanoindentation results showed that, although the hardness of both the as-deposited and annealed Cu-W alloyed thin films monotonically increased with W concentrations, a transition from annealing hardening to annealing softening was interestingly observed at the critical W addition of ∼25 at%. It was further revealed that an enhanced GB segregation associated with detwinning was responsible for the annealing hardening, while a reduced solid solution hardening for the annealing softening.

The Synergistic Effect of Re and W on the Evolution of TCP Phases in Nickel-based Superalloys

Minimum Interface Misfit Criterion for the Precipitation Morphologies of TCP Phases in a Ni-based Single Crystal Superalloy

Structural Evolution of Topologically Closed Packed Phase in a Ni-based Single Crystal Superalloy

The Effect of Stress Gradient on the Formation of TCP Phases in a Ni-based Single Crystal Superalloy at 1050 Oc

Study on the Relationship Between TCP Phase and AlN Phase in a Fourth-Generation Single-Crystal Superalloy

The Effects of Refractory Elements on Mechanical Properties in CoCrNiFe Concentrated Solid Solution Alloys Across Different Temperatures

The Effects of Key Elements Re and Ru on the Phase Morphologies and Microstructure in Ni-based Single Crystal Superalloys

Study of pre-precipitated 8 phase promoting deformation twinning and recrystallization behavior of Inconel 718 superalloy during hot compression

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Influence of Solidification History on Precipitation Behavior of TCP Phase in a Completely Heat-Treated Ni3Al Based Single Crystal Superalloy During Thermal Exposure

The Origin of the Straight Propagation of the Σ Phase in a Ni-based Single Crystal Superalloy at Elevated Temperature

Improving the Effectiveness of the Solid-Solution-Strengthening Elements Mo, Re, Ru and W in Single-Crystalline Nickel-Based Superalloys

Effects of Re on microstructure evolution of nickel-based single crystal superalloys

High-throughput exploration of alloying effects on the microstructural stability and properties of multi-component CoNi-base superalloys

Unveiling the Re effect on long-term coarsening behaviors of γ′ precipitates in Ni-based single crystal superalloys

The overview of the formation mechanisms of topologically close-packed phases in Ni-based single crystal superalloys

Effect of Chemical Composition on Particle Morphology of Topologically Close-Packed Precipitates in a Ni-based Single Crystal Superalloy

The effect of rhenium on the microstructure stability and γ/γ′ interfacial characteristics of Ni-based single crystal superalloys during long-term aging

The effect of fine W particles in matrix phase on mechanical properties of tungsten heavy alloys

Avoiding microstructural instabilities in high tungsten containing superalloys by adjusting Al content

Phase-field simulation of γʹ coarsening behavior in cobalt-based superalloy