Abstract:A novel bio-based benzoxazine resin (phenolphthalein-furfuramine-benzoxazine , PTL-F-BOZ) , used bio-based furfurylamine , phenolphthalein , and paraformaldehyde as raw materials , was synthesized and characterized by Fourier transform infrared spectroscopy (FTIR) , nuclear magnetic resonance (H-1 NMR and C-13 NMR) . The curing , thermal and flame retardant properties were analyzed by differential scanning calorimetric (DSC) , thermogravimetric analyzer (TG) , limiting oxygen index (LOI) , vertical burning test, microscale combustion calorimetry (MCC) , cone calorimeter(Cone) and scanning electron microscope (SEM) . The DSC curve of PTL-F-BOZ showed a two-stage curing with two maxima at 224 and 251 degrees C respectively, and had lower curing temperature than that of the traditional fossil-based bisphenol benzoxazine bisphenol A-aniline benzoxazine (bisphenol A-aniline-benzoxazine , BPA-A-BOZ) . The presence of the furan ring in the furfurylamine increased the cross-linking density of polymer, retarded the rearrangement reaction from the phenoxy structure to the phenol structure, and resulted in two curing peaks in the DSC curve of PTL-F-BOZ. Under nitrogen and air atmospheres, the temperatures of 5% mass loss (T-5%) for PPTL-F-BOZ resin were 380 and 370 degrees C , respectively and the residual chars at 800 degrees C were 63. 0% and 10. 5% , respectively. Compared with PBPA-A-BOZ resin, PPTL-F-BOZ resin both possessed higher T-5% and residual char of 800 degrees C. From the DTG curve , the maximum mass loss rates of two decomposition stage (Peak 1 and Peak 2 values) of PPTL-FBOZ resin were 0. 67%/min and 3. 28%/min, which were only 7. 38% and 63. 44% of PBPA-A-BOZ (9. 07%/min and 5. 17%/min) under nitrogen atmosphere , and those were also the same under air atmosphere. LOI of PPTL-F-BOZ resin was 36. 2%, which was higher than that of PBPA-A-BOZ resin. Meanwhile, in the UL-94 test, PPTL-F-BOZ resin extinguished quickly and released less smoke during combustion process, and the original morphology was kept well and a stable carbon layer was formed after burning. Its first ignition time(t(1)) and second ignition time(t(2)) were 1. 4 and 8. 5 s , respectively , far smaller than the maximum permissible values of 10 s, and a UL94 V-0 rating was also achieved. Hence, PPTL-F-BOZ resin showed excellent thermal and flame retardant properties.

Preparation and Properties of 3-Methylcatechol/Furfurylamine Based Polybenzoxazine

Synthesis, Curing, and Thermal Stability of Low-Temperature-Cured Benzoxazine Resins Based on Natural Renewable Resources

Novel Full Bio-Based Phloroglucinol Benzoxazine Resin: Synthesis, Curing Reaction and Thermal Stability

Synthesis and Properties of a Novel Bio‐based Benzoxazine Resin with Excellent Low‐temperature Curing Ability

Effect of Acetylacetone Metal Salts on Curing Mechanism and Thermal Stability of Polybenzoxazine

Synthesis and Properties of a Novel Bio-based Benzoxazine

Synthesis of Aromatic Diamine-Based Benzoxazines and Effect of Their Backbone Structure on Thermal and Flammability Properties of Polymers

Synthesis and Characterization of Benzoxazine Resin Based on Furfurylamine

Bio-based, Main-Chain Type Polybenzoxazine Precursor Derived from Sustainable Furfurylamine and Salicylaldehyde: Synthesis, Characterization and Properties

High Performance Benzoxazine Monomers And Polymers Containing Furan Groups

Preparation of Novel Benzoxazine Monomers Containing Ferrocene Moiety and Properties of Polybenzoxazines

Benzoxazine Containing Fluorinated Aromatic Ether Nitrile Linkage: Preparation, Curing Kinetics and Dielectric Properties.

Renewable furan-derived diamine as primary amine source to prepare fully bio-based bis-benzoxazine monomer under solvent-free condition

Melamine as cross‐linking agent for mono‐cyclic benzoxazine with aldehyde groups: higher crosslinking density and thermal properties

Two Novel Halogen‐free, Phosphorus‐free, and Intrinsically Flame‐retardant Benzoxazine Thermosets Containing Electron‐withdrawing Bridge Groups

Preparation and Curing of Low-viscosity Benzoxazine Resin

Chitosan/biological Benzoxazine Composites: Effect of Benzoxazine Structure on the Properties of Composites

Improved curing reactivity, thermal resistance and mechanical properties of furylamine‐based benzoxazine using melamine as an amine source

Synthesis and characterization of new polybenzoxazines from renewable resources for bio-composite applications

Copolymer of Eugenol-Based and Pyrogallol-Based Benzoxazines: Low Curing Temperature and Enhanced Corrosion Resistance

Sustainable Preparation of Bio-Based Polybenzoxazine Resins from Amino Acid and Their Application in CO2 Adsorption