Abstract:Metamaterials exhibiting exceptional thermoelastic properties are emerging as promising candidates for scientific and engineering applications. Previous studies on mechanical metamaterials with negative thermal expansion (NTE) have primarily focused on enhancing isotropic NTE, often resulting in a high coefficient of thermal expansion (CTE) but low stiffness that characterizes bending-dominated NTE metamaterials. In this study, we proposed a novel mechanical metamaterial with significant anisotropic thermal expansion behavior and substantial stiffness based on the cross structure, re-entrant structure, and triangular structure with NTE. The programmable CTE and effective elastic modulus were analytically derived using the unit load method and stiffness matrix method, respectively, which were validated by numerical results obtained from finite element analysis (FEA). Drawing inspiration from the body-centered cubic and face-centered cubic strategies, two types of extended three-dimensional metamaterials can be obtained. The results demonstrate that a larger length ratio lambda and angle theta(3) can enhance the NTE effect, while reducing the Young's modulus. The maximum magnitudes of NTE and positive thermal expansion (PTE) are achieved at approximately theta(2) = 90 degrees, resulting in a decreased stiffness and slight negative Poisson's ratio (NPR). By adjusting the angles theta(2) of re-entrant structures, six distinct anisotropic thermal expansion behaviors can be obtained in this planar metamaterial. Furthermore, a wider range of isotropic CTE as well as an extended range of anisotropic CTE can be achieved in the present metamaterial compared to its original metamaterials. The proposed metamaterial can be combined with traditional triangle metamaterials to enhance thermoelastic properties. The analysis also provides valuable insights into designing metamaterials with large CTE, optimal stiffness, and lightweight properties simultaneously for engineering applications.

A novel mechanical metamaterial with tailorable Poisson's ratio and thermal expansion based on a chiral torsion unit

Programmable Mechanical Metamaterials with Tailorable Negative Poisson's Ratio and Arbitrary Thermal Expansion in Multiple Thermal Deformation Modes

A Synergistic Design of Composite Metamaterial with Drastically Tailorable Thermal Expansion and Poisson's Ratio

Anisotropic Thermal Expansion Based on a Novel Metamaterial

A series of auxetic metamaterials with negative thermal expansion based on L -shaped microstructures

Controllable design of bi-material metamaterials with programmable thermal expansion and Poisson's ratio

Novel 2D metamaterials with negative Poisson’s ratio and negative thermal expansion

Novel Metamaterial Structures with Negative Thermal Expansion and Tunable Mechanical Properties

Novel Metamaterials with Thermal-Torsion and Tensile-Torsion Coupling Effects

A Novel Mechanical Metamaterial with Simultaneous Stretching- and Compression-Expanding Property

A Novel Mechanical Metamaterial with Dramatically Different Elastic Parameters in Tension and Compression

Bifunctional Metamaterials Incorporating Unusual Geminations of Poisson's Ratio and Coefficient of Thermal Expansion

Three-phase Soft Mechanical Metamaterials for Tunable Negative Expansion Deformation and Bandgaps

Correction to "Isotropic Negative Thermal Expansion Metamaterials".

Design and characterization of novel bi-directional auxetic cubic and cylindrical metamaterials

Isotropic Negative Thermal Expansion Metamaterials.

An anisotropic negative thermal expansion metamaterial with sign-toggling and sign-programmable Poisson’s ratio

Three-Dimensionally Printed Mechanical Metamaterials With Thermally Tunable Auxetic Behavior

A novel design of mechanical metamaterial incorporating multiple negative indexes

Low Frequency Bandgap and High Stiffness of Innovative Auxetic Metamaterial with Negative Thermal Expansion

2D Mechanical Metamaterials with Widely Tunable Unusual Modes of Thermal Expansion