Abstract:The use of trimethylolpropane triesters as biodegradable lubricant base oil substitute mineral oils could significantly reduce the environmental pollution. In the present work, a commercial oleic acid (72% C18) was utilized as a precursor for the manufacture of trimethylolpropane triesters (TMPTE) through a two-step transesterification process. Oleic acid methyl ester (OME) produced from the first step was subsequently interacted with trimethylolpropane (TMP) using sodium methylate to produce TMPTE. The effect of the operating parameters, temperatures (90 °C, 100 °C, 110 °C, 120 °C, and 130 °C), molar ratio of OME to TMP (3:1, 4:1, 5:1, and 7:1), vacuum pressure (20, 50, 100, and 200 mbar), and catalyst amount (0.5, 0.7, 0.9, and 1.1(w/w)) was investigated. Under the selected reaction conditions (temperature 120 °C, oleic acid methyl ester to trimethylolpropane molar ratio 4:1, catalyst amount 0.9%w/w, vacuum pressure 20 mbar and reaction time 2 h), the final product composition was approximately 85.47% TMPTE, 10.80% TMPDE, 1.40%TMP ME, and 2.33% OME. The kinetics/mathematical model explains the chemical kinetics of transesterification of oleic acid methyl esters (OME) with trimethylolpropane (TMP) to produce biolubricant which has been investigated at temperature 120 °C. To support forward reaction, the excess amount of OME was increased by 10:1 (OME/TMP). The kinetic model suggested for the transesterification process of OME with TMP in this work based on three reversible series-parallel reaction mechanisms. The kinetics equations were solved using LINGO PROGRAM. A harmony between the experimental data and theoretically estimated values was achieved.

Heterogeneous esterification of ricinoleic acid with polyol for the synthesis of polyol ricinoleates as biomass-based lubricant base oil

Tribological Properties and Thermal-Stability of Epoxide-Functionalized Biolubricant Derived from the Abandon Aerial Part of Codonopsis Pilosula

Transesterification of Methyl Oleate for Sustainable Production of Biolubricant: Process Optimization and Kinetic Study

Achieving the Good Thermal-Stability and Lubricity Via a Dihydroxy Biolubricant from the Agro-Waste of Codonopsis Pilosula

Enzyme-catalyzed preparation of polyol ester lubricants and performance research-based on pelargonic acid, oleic acid and trimethylolpropane

Enzyme-catalyzed synthesis and properties of polyol ester biolubricant produced from Rhodotorula glutinis lipid

Polyols from castor oil (Ricinus communis) and epoxidized soybean oil (Glycine max) for application as a lubricant base

Environmentally adapted bio-oil compounds-derived polyolesters synthesis: Optimization and properties of base fluids

Catalytic synthesis of renewable lubricant base oils with methyl oleate and aromatics

Synthesis and characterization of new esters of oleic acid and glycerol analogues as potential lubricants

Synthesis of polyol esters of estolide and evaluation of their tribological properties

Biolubricant Production of 2‐ethylhexyl Palmitate by Transesterification over Unsupported Potassium Carbonate

Design of a biolubricant by the enzymatic esterification of the free fatty acids from castor oil with neopentylglycol

Synthesis, Characterization, Tribological and Rheological Properties of Di (2-Butyloctyl) Dicarboxylate Esters for Environmentally Friendly Biolubricant Applications

Investigation on the lubrication component and mechanism for a biolubricant isolated from the agro-waste resource of Codonopsis pilosula

Synthesis and kinetics study of trimethylolpropane fatty acid triester from oleic acid methyl ester as potential biolubricant

Immobilized lipase-catalyzed transesterification for synthesis of biolubricant from palm oil methyl ester and trimethylolpropane

Green preparation of branched biolubricant by chemically modifying waste cooking oil with lipase and ionic liquid

Optimizing the enzymatic production of biolubricants by the Taguchi method: Esterification of the free fatty acids from castor oil with 2-ethyl-1-hexanol catalyzed by Eversa Transform 2.0

Synthesis and emulsification properties of polyglyceryl estolides prepared from fatty acids

Modification and synthesis of low pour point plant-based lubricants with ionic liquid catalysis