Abstract:Recently MXenes become the focus of emerging 2D layered materials family owing to their unique properties and promising potential in gas detection. However, the sensitivity and the stability of the pristine MXenes are poor due to their high carrier concentration and abundant active sites on the surface. Herein, superior NH3 sensors with high response and stability were successfully obtained by wrapping the SnO2 nanoparticles on Ti3C2Tx MXene nanosheets via a facile hydrothermal method. The nanostructures, morphologies, and compositions of the Ti3C2Tx MXene-SnO2 composite were systematically characterized by XRD, FTIR, SEM, TEM and XPS techniques. Results show that SnO2 nanoparticles with high specific surface area are uniformly dispersed on the Ti3C2Tx MXene surface, constructing loose heterostructure, which plays a crucial role in gas adsorption/desorption. In the Ti3C2Tx MXene-SnO2 heterostructure, the Ti3C2Tx MXene acts as a signal amplification channel for electron transfer in gas sensing reaction. The sensors exhibit excellent NH3 gas detection at room temperature. Response as high as 75% is observed for 500 ppm NH3 gas. Fast response and recovery times are also obtained, 109 and 342 s, respectively. Moreover, the sensing performances of the Ti3C2Tx MXene-SnO2 composite with various MXene ratios were systematically studied. It is found out that the 16.8%Ti3C2Tx-SnO2 based sensor shows the highest sensitivity in 10∼100 ppm range, and the 9.1%Ti3C2Tx-SnO2 based sensor exhibits the widest detection range. In addition, the selectivity and repeatability were also studied, revealing high selectivity and stability of the Ti3C2Tx MXene-SnO2 composite. Thus, Ti3C2Tx-SnO2 composite provides a new material to design and develop superior room temperature NH3 gas sensors.

Two-dimensional Ti3C2Tx MXene/SnO Nanocomposites: Towards Enhanced Response and Selective Ammonia Vapor Sensor at Room Temperature

Ti3C2Tx MXene-SnO2 nanocomposite for superior room temperature ammonia gas sensor

Partially oxidized Ti3C2Tx MXene-sensitive material-based ammonia gas sensor with high-sensing performances for room temperature application

A Two-Dimensional Ti3C2TX MXene@TiO2/MoS2 Heterostructure with Excellent Selectivity for the Room Temperature Detection of Ammonia

Enhanced room temperature ammonia response of 2D-Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> MXene decorated with Ni(OH)<sub>2</sub> nanoparticles

Enhanced room temperature ammonia response of 2D-Ti3C2T MXene decorated with Ni(OH)2 nanoparticles

Layered Ti3C2Tx MXene Heterostructured with V2O5 Nanoparticles for Enhanced Room Temperature Ammonia Sensing

NiO/Ti3C2Tx MXene Nanocomposites Sensor for Ammonia Gas Detection at Room Temperature

Low operating temperature and highly selective NH3 chemiresistive gas sensors based on a novel 2D Ti3C2Tx/ZnO composite with p–n heterojunction

Mxene Ti3C2Tx Derived Lamellar Ti3C2Tx-TiO2-CuO Heterojunction: Significantly Improved Ammonia Sensor Performance

Layered Ti3C2Tx MXene/CuO Spindles Composites for NH3 Detection at Room-Temperature

Highly Selective Triethylamine Gas Sensor Based on ZnO/Ti3C2Tx MXene Self-Assembly Heterostructure

High Sensitivity Bi2O3/Ti3C2Tx Ammonia Sensor Based on Improved Synthetic MXene Method at Room Temperature

Enhanced Ammonia Response of Ti3C2Tx Nanosheets Supported by TiO2 Nanoparticles at Room Temperature

MXene Ti3C2Tx-Derived Nitrogen-Functionalized Heterophase TiO2 Homojunctions for Room-Temperature Trace Ammonia Gas Sensing.

Fe2O3 Nanoplate/tio2 Nanoparticles Supported by 2D Ti3C2Tx MXene Conductive Layers for Sensitive Detection of NH3 at Room Temperature

A two-dimensional Ti<sub>3</sub>C<sub>2</sub>T<sub><i>X</i></sub> MXene@TiO<sub>2</sub>/MoS<sub>2</sub> heterostructure with excellent selectivity for the room temperature detection of ammonia

Exploring Monolayer Ta4c3tx Mxene for Quick Ammonia Detection at Room Temperature

Room temperature gas sensors for NH3 detection based on the heterojunction of 2D Ti3C2Tx MXenes and Bi2S3

SnO2-inserted 2D Layered Ti3C2Tx MXene: from Heterostructure Construction to Ultra-High Sensitivity for Ppb-level H2S Detection

Highly Selective NH3 Gas Sensor Based on Co(OH)2/Ti3C2Tx Nanocomposites Operating at Room Temperature