Abstract:In pursuing cost-effective green hydrogen production via proton exchange membrane water electrolysis (PEMWE), the high expense of the iridium (Ir)-based oxygen evolution reaction (OER) catalysts poses a significant challenge. To overcome this issue, researchers have focused on developing active OER catalysts and catalyst layers (CLs) with minimum uses of Ir. However, they frequently encountered performance problems at the single-cell level that originate not only from the kinetic polarization but also from the ohmic polarization. In this aspect, we have focused on identifying the reasons for the poor performance of low IrO x -loaded anodes, with loadings as low as 0.10 mg cm -2 . We pinpoint the cause of the poor performance of the low loaded anodes to an electron transport problem within the native oxide on the Ti porous transport layer (PTL). Our analysis, grounded in the metal-insulator band model, reveals that the primary factors contributing to electron conductivity loss in the Ti oxide are the upward band bending induced by the Schottky contact with high work function IrO x and by the pinch-off effect from the extensive ionomer contact. Based on the above understanding, we propose an anode CL composed of a one-dimensional iridium catalyst, fabricated by electrospinning and calcination processes. Our nanofiber-based CL effectively mitigates the electron transport problem of the native Ti oxide. This improvement stems from the low work function of the Ir nanofiber catalyst and the highly porous structure that reduces the ionomer contact with the Ti oxide. Furthermore, the highly porous nature of the nanofiber-based CL enhances two-phase mass transport, facilitating the high current operation. These findings underscore the critical role of the CL/PTL interface of the PEMWE anode and present the necessity of a well-structured CL to achieve efficient and cost-effective water electrolysis.

Mass-efficient catalyst layer of hierarchical sub-nanosheets on nanowire for practical proton exchange membrane electrolyzer

Construction of Homogeneous Catalyst Layers at Proton Exchange Membrane Fuel Cell Cathodes

Reshaping the Cathodic Catalyst Layer for Anion Exchange Membrane Fuel Cells: from Heterogeneous Catalysis to Homogeneous Catalysis

N/C doped nano-size IrO2 catalyst of high activity and stability in proton exchange membrane water electrolysis

Supported IrO2 Nanocatalyst with Multilayered Structure for Proton Exchange Membrane Water Electrolysis

Hierarchical catalyst layer structure for enhancing local oxygen transport in low Pt proton exchange membrane fuel cells

Anode catalyst layer with hierarchical pore size distribution for highly efficient proton exchange membrane water electrolysis

Simultaneously Improving the Pore Structure and Electron Conductive Network of the Anode Catalyst Layer Via SnO2 Doping for Proton Exchange Membrane Water Electrolysis

Interface-Strengthened Ru-Based Electrocatalyst for High-Efficiency Proton Exchange Membrane Water Electrolysis at Industrial-Level Current Density

Hierarchical WMoC nano array with optimal crystal facet as a non-noble metal cathode for proton exchange membrane water electrolyser

Microdrop-confined synthesis and regulation of porous hollow Ir-based catalysts for the mass transfer-enhanced electrolysis of pure water

Highly Porous Iridium Thin Electrodes with Low Loading and Improved Reaction Kinetics for Hydrogen Generation in PEM Electrolyzer Cells

Engineering the PEM Water Electrolysis Anode for Better Interfacial Electrical Conductivity

In Situ Construction of a Nanostructured Ultrathin Catalyst Layer on Both Sides of a Membrane toward Fuel Cell Application

Ir–Ru Electrocatalysts Embedded in N‐Doped Carbon Matrix for Proton Exchange Membrane Water Electrolysis

Single-Iron Site Catalysts with Self-Assembled Dual-size Architecture and Hierarchical Porosity for Proton-Exchange Membrane Fuel Cells

Designing a Schottky Barrier-Free Interface for a Highly Conductive Anode in Proton Exchange Membrane Water Electrolysis

One‐Step Fabrication of Ultralow Pt Loading High Efficiency Proton Exchange Membrane for Water Electrolysis by Conventional E‐Beam Metal Deposition

Ultrathin Ultralow-Platinum Catalyst Coated Membrane for Proton Exchange Membrane Fuel Cells

Structure–Performance Correlation Inspired Platinum-Assisted Anode with a Homogeneous Ionomer Layer for Proton Exchange Membrane Water Electrolysis

Nano-metal diborides-supported anode catalyst with strongly coupled TaOx/IrO2 catalytic layer for low-iridium-loading proton exchange membrane electrolyzer